This file provides firmware functions to manage the following functionalities of the Analog to Digital Convertor (ADC) peripheral:

• Initialization and Configuration
• Power saving
• Analog Watchdog configuration
• Temperature Sensor & Vrefint (Voltage Reference internal) management
• Regular Channels Configuration
• Regular Channels DMA Configuration
• Injected channels Configuration
• Interrupts and flags management.

This file provides firmware functions to manage the following functionalities of the Advanced Encryption Standard (AES) peripheral:

• Configuration
• Read/Write operations
• DMA transfers management
• Interrupts and flags management.

This file provides firmware functions to manage the following functionalities of the BEEPER (BEEP) peripheral:

• Initialization and Configuration
• Low Speed Internal Clock(LSI) Calibration.

This file provides firmware functions to manage the following functionalities of the clock controler (CLK) peripheral:

• Internal/external clocks, CSS and CCO configuration
• System clocks configuration
• Peripheral clocks configuration
• CSS on LSE configuration
• Low power clock configuration
• Interrupts and flags management.

This file provides firmware functions to manage the following functionalities of the comparators (COMP1 and COMP2) peripheral:

• Comparators configuration
• Window mode control
• Internal Reference Voltage (VREFINT) output
• Comparator channels trigger configuration
• Interrupts and flags management.

This file provides firmware functions to manage the following functionalities of the Digital-to-Analog Converter (DAC) peripheral:

• DAC channels configuration: trigger, output buffer, data format
• DMA management
• Interrupts and flags management.

This file provides all the DMA firmware functions.

This file provides firmware functions to manage the following functionalities of the EXTI peripheral:

• Interrupt sensitivity of GPIO ports/pins configuration
• Interrupt status management.

This file provides all the Flash firmware functions. These functions can be executed from Internal FLASH or Internal RAM memories.

• FLASH program and Data EEPROM memories interface configuration
• FLASH program and Data EEPROM memories Programming
• Option Bytes Programming
• Interrupts and flags management
• Functions to be executed from RAM.

This file provides firmware functions to manage the following functionalities of the GPIO peripheral:

• Initialization and Configuration
• GPIO Read and Write.

This file provides firmware functions to manage the following functionalities of the Inter-integrated circuit (I2C)

• Initialization and Configuration
• Data transfers
• PEC management
• DMA transfers management
• Interrupts, events and flags management.

This file provides firmware functions to configure the IRTIM peripheral.

This file provides firmware functions to manage the following functionality of the Interrupt controller (ITC) peripheral:

• Configuration and management.

This file provides firmware functions to manage the following functionalities of the Independent watchdog (IWDG) peripheral:

• Prescaler and Counter configuration
• IWDG activation.

This file provides firmware functions to manage the following functionalities of the LCD controller (LCD) peripheral:

• Initialization and configuration
• LCD RAM memory write
• Interrupts and flags management.

This file provides firmware functions to manage the following functionalities of the Power Controller (PWR) peripheral:

• PVD configuration
• Ultra Low Power mode configuration
• Interrupts and flags management.

This file provides firmware functions to manage the following functionalities of the RST peripheral:

• Flag management
• NRST Pin configuration.

This file provides firmware functions to manage the following functionalities of the Real-Time Clock (RTC) peripheral:

• Initialization
• Calendar (Time and Date) configuration
• Alarm configuration
• WakeUp Timer configuration
• Daylight Saving configuration
• Output pin Configuration
• Smooth Calibration configuration
• Tampers configuration
• Output Type configuration
• Interrupts and flags management.

This file provides firmware functions to manage the following functionalities of the Serial peripheral interface (SPI):

• Initialization and Configuration
• Data transfers functions
• Hardware CRC Calculation
• DMA transfers management
• Interrupts and flags management.

This file provides firmware functions to manage the following functionalities of the RI and SYSCFG:

• RI configuration
• SYSCFG configuration.

This file provides firmware functions to manage the following functionalities of the TIM1 peripheral:

• TimeBase management
• Output Compare management
• Input Capture management
• Interrupts, DMA and flags management
• Clocks management
• Synchronization management
• Specific interface management.

This file provides firmware functions to manage the following functionalities of the TIM2 peripheral:

• TimeBase management
• Output Compare management
• Input Capture management
• Interrupts, DMA and flags management
• Clocks management
• Synchronization management
• Specific interface management.

This file provides firmware functions to manage the following functionalities of the TIM3 peripheral:

• TimeBase management
• Output Compare management
• Input Capture management
• Interrupts, DMA and flags management
• Clocks management
• Synchronization management
• Specific interface management.

This file provides firmware functions to manage the following functionalities of the TIM4 peripheral:

• TimeBase management
• Interrupts, DMA and flags management
• Clocks management
• Synchronization management.

This file provides firmware functions to manage the following functionalities of the TIM5 peripheral:

• TimeBase management
• Output Compare management
• Input Capture management
• Interrupts, DMA and flags management
• Clocks management
• Synchronization management
• Specific interface management.

This file provides firmware functions to manage the following functionalities of the Universal synchronous asynchronous receiver transmitter (USART):

• Initialization and Configuration
• Data transfers
• Multi-Processor Communication
• Half-duplex mode
• Smartcard mode
• IrDA mode
• DMA transfers management
• Interrupts and flags management.

This file provides firmware functions to manage the following functionalities of the Wait for Event (WFE) peripheral:

• WFE Source configuration and management.

This file provides firmware functions to manage the following functionalities of the Window watchdog (WWDG) peripheral:

• Refresh window and Counter configuration
• WWDG activation
• Couter and software reset management.