stm8l15x_irtim.c File Reference

This file provides firmware functions to configure the IRTIM peripheral. More...

#include "stm8l15x_irtim.h"

Go to the source code of this file.

Functions
void	IRTIM_Cmd (FunctionalState NewState)
	Enables or disables the IRTIM peripheral.
void	IRTIM_DeInit (void)
	Deinitializes the IRTIM peripheral registers to their default reset values.
FunctionalState	IRTIM_GetHighSinkODStatus (void)
	Checks whether the IRTIM High Sink Open Drain buffer is Enabled or not.
FunctionalState	IRTIM_GetStatus (void)
	Checks whether the IRTIM device is enabled or not.
void	IRTIM_HighSinkODCmd (FunctionalState NewState)
	Enables or disables the High sink open drain buffer of the IRTIM peripheral.

---

Detailed Description

This file provides firmware functions to configure the IRTIM peripheral.

Author:

MCD Application Team

Version:

V1.5.0

Date:

13-May-2011

  *  
  *          ===================================================================
  *                                 How to use this driver
  *          ===================================================================
  *          This driver provides functions to:
  *             1. Enable the IRTIM peripheral
  *             2. Enable the high sink mode on the IRTIM pin 
  *               
  *  

Attention:

THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.

© COPYRIGHT 2011 STMicroelectronics

Definition in file stm8l15x_irtim.c.