RTC_Flags

Enumerations

enum

RTC_Flag_TypeDef {   RTC_FLAG_TAMP3F = ((uint16_t)0x0080), RTC_FLAG_TAMP2F = ((uint16_t)0x0040), RTC_FLAG_TAMP1F = ((uint16_t)0x0020), RTC_FLAG_WUTF = ((uint16_t)0x0004),   RTC_FLAG_ALRAF = ((uint16_t)0x0001), RTC_FLAG_INITF = ((uint16_t)0x4000), RTC_FLAG_RSF = ((uint16_t)0x2000), RTC_FLAG_INITS = ((uint16_t)0x1000),   RTC_FLAG_SHPF = ((uint16_t)0x0800), RTC_FLAG_WUTWF = ((uint16_t)0x0400), RTC_FLAG_RECALPF = ((uint16_t)0x0200), RTC_FLAG_ALRAWF = ((uint16_t)0x0100) }

---

Enumeration Type Documentation

enum RTC_Flag_TypeDef

Enumerator:

RTC_FLAG_TAMP3F	TAMPER3 detection Flag. If set, tamper detection event is detected on tamper input 3
RTC_FLAG_TAMP2F	TAMPER2 detection Flag. If set, tamper detection event is detected on tamper input 2
RTC_FLAG_TAMP1F	TAMPER1 detection Flag. If set, tamper detection event is detected on tamper input 1
RTC_FLAG_WUTF	Wake up Timer Flag. If set, the Wake Up down counter reaches 0
RTC_FLAG_ALRAF	Alarm A Flag. If set, the Time/Date registers matches Alarm A registers
RTC_FLAG_INITF	Initialisation Flag. If set,Calender registers has been initialized
RTC_FLAG_RSF	Registers Synchronization Flag. If set,Calender registers synchronized
RTC_FLAG_INITS	Initialisation Status Flag. If set,Calender update is allowed
RTC_FLAG_SHPF	Shift operation pending Flag. This flag is set by hardware as soon as a shift operation is initiated by a write to the RTC_SHIFTRL. It is cleared by hardware as soon as the corresponding shift operation has completed.
RTC_FLAG_WUTWF	Wake up Timer write Flag. If set, Wake up Timer update is allowed
RTC_FLAG_RECALPF	Recalibration pending Flag, The status flag RECALPF is automatically set to �1� when software writes to the register RTC_CALRL, indicating that the RTC_CALRx registers are blocked. When the new calibration settings are taken into account, this Flag returns by hardware to �0�.
RTC_FLAG_ALRAWF	Alarm A write Flag. If set, Alarm A update is allowed

Definition at line 279 of file stm8l15x_rtc.h.