Scope Channel Settings—Acquire
Click the other tabs in this figure for information about those settings.
To configure IVI Soft Front Panels—Scope Channel Acquire Settings, select Edit»Channel Settings.
| Channel Name | Displays the name for the corresponding oscilloscope channel. |
| Color | Selects the color of the plot and status information on the front panel. |
| Input Impedance | Specifies the oscilloscope channel's input impedance in Ohms. |
| Probe Attenuation | Specifies an initial scale value which applies to the signal. For example, if you use a 10X probe on channel one, set the attenuation value to ten. Each channel can have a different attenuation factor. |