Measuring Voltage
IVI Soft Front Panels—DMM measures AC and DC voltage with your IviDMM instrument. Complete the following steps to measure voltage:
- Connect a signal to the specified channel of your IviDMM instrument.
- Click Volts AC or Volts DC in the front panel.
- Click Run. IVI Soft Front Panels—DMM continuously acquires and displays voltage measurements in the Measurement display. Or click Single, IVI Soft Front Panels—DMM acquires and displays a voltage measurement in the Measurement display.
- If the display shows +OVER or OVER, make sure the input signal has not exceeded the range selected on the front panel.
Other Signal Options: