These functions and macros are used to determine hardware profile settings on the chosen PIC microcontroller and hardware such as demo boards used.
Topics
|
Name |
Description |
|
Specifies the interface type to the Parallel Master Port (PMP) or Enhanced Parallel Master Port (EPMP). | |
|
Specifies the Development Platform used for the Microchip Graphics Library demos. | |
|
Specifies the Graphics PICtail Display Panel used. | |
|
Specifies the controller used in the Graphics Library supplied demo. | |
|
Specifies the Graphics Display Panel used. | |
|
The options Graphics Hardware Platform, DISPLAY_CONTROLLER and DISPLAY_PANEL are specific to the hardware used. The Graphics Hardware Platform selects the Graphics PICtail™ Plus Board version, PIC24FJ256DA210 Development Board or any other Microchip demo boards for the Graphics Library. Currently there are two Graphics PICtail™ Plus Board versions supported as shown in the Getting Started section. The rest of the settings are used to specify the the display parameters when using an RGB type display controller such as SSD1906 and SSD1926 from Solomon Systech. The table below summarizes the generic parameters found in RGB type display controllers and when each type is used.... more | |
|
This is an example of the HardwareProfile.h file implementation: |
Links