Counter Input:Measurement Type Property
Short Name: CI.MeasType
Property of DAQmx Channel
Indicates the measurement to take with the channel.
| Count Edges (10125) | Count edges of a digital signal. |
| Frequency (10179) | Measure the frequency of a digital signal. |
| Period (10256) | Measure the period of a digital signal. |
| Two Edge Separation (10267) | Measure time between edges of two digital signals. |
| Semi Period (10289) | Measure the time between state transitions of a digital signal. |
| Pulse Width (10359) | Measure the width of a pulse of a digital signal. |
| Position:Angular Encoder (10360) | Angular position measurement using an angular encoder. |
| Position:Linear Encoder (10361) | Linear position measurement using a linear encoder. |
| GPS Timestamp (10362) | Timestamp measurement, synchronizing the counter to a GPS receiver. |
Remarks
The following table lists the characteristics of this property.
| Permissions | read only |
| Resettable | no |
| Settable while task is running | device-specific |
| Available in Run-Time Engine | yes |