DAQmx Physical Channel Properties
Use the DAQmx Physical Channel properties to query information about physical channels. Use the DAQmx Channel properties to configure virtual channels.
Property | Description |
---|---|
Active Physical Channels | Specifies the physical channel from which to retrieve properties. Details |
Analog Input:Input Configuration:Terminal Configurations | Indicates the list of terminal configurations supported by the channel. Details |
Analog Output:Output Configuration:Terminal Configurations | Indicates the list of terminal configurations supported by the channel. Details |
Analog Output:Advanced:Manual Control:Enable | Specifies if you can control the physical channel externally via a manual control located on the device. You cannot simultaneously control a channel manually and with NI-DAQmx. Details |
Analog Output:Advanced:Manual Control:Amplitude | Indicates the current value of the front panel amplitude control for the physical channel in volts. Details |
Analog Output:Advanced:Manual Control:Frequency | Indicates the current value of the front panel frequency control for the physical channel in hertz. Details |
Digital Input:Port Width | Indicates in bits the width of digital input port. Details |
Digital Input:Timing:Sample Clock Supported | Indicates if the sample clock timing type is supported for the digital input physical channel. Details |
Digital Input:Timing:Change Detection Supported | Indicates if the change detection timing type is supported for the digital input physical channel. Details |
Digital Output:Port Width | Indicates in bits the width of digital output port. Details |
Digital Output:Timing:Sample Clock Supported | Indicates if the sample clock timing type is supported for the digital output physical channel. Details |
TEDS:ManufacturerID | Indicates the manufacturer ID of the sensor. Details |
TEDS:Model Number | Indicates the model number of the sensor. Details |
TEDS:Serial Number | Indicates the serial number of the sensor. Details |
TEDS:Version Number | Indicates the version number of the sensor. Details |
TEDS:Version Letter | Indicates the version letter of the sensor. Details |
TEDS:BitStream | Indicates the TEDS binary bitstream without checksums. Details |
TEDS:TemplateIDs | Indicates the IDs of the templates in the bitstream in TEDS.BitStream. Details |