Analog Input:General Properties:Signal Conditioning:Excitation:Advanced:Use Excitation For Scaling Property
Short Name: AI.Excit.UseForScaling
Property of DAQmx Channel
Specifies if NI-DAQmx divides the measurement by the excitation. You should typically set this property to TRUE for ratiometric transducers. If you set this property to TRUE, set AI.Max and AI.Min to reflect the scaling.
For example, if you expect to acquire a voltage between -5 and 5, and you use an excitation of .10 volts to scale the measurement, set AI.Min to -50 and set AI.Max to 50. If you set AI.Bridge.Cfg to No Bridge, this property has no effect on the measurement.
Remarks
The following table lists the characteristics of this property.
Permissions | read/write |
Resettable | yes |
Settable while task is running | device-specific |
Available in Run-Time Engine | yes |