STM8S/A Standard Peripherals Firmware Library: stm8s_it.c Source File

00001 /**
00002   ******************************************************************************
00003   * @file     stm8s_it.c
00004   * @author   MCD Application Team
00005   * @version  V2.2.0
00006   * @date     30-September-2014
00007   * @brief    Main Interrupt Service Routines.
00008   ******************************************************************************
00009   * @attention
00010   *
00011   * <h2><center>&copy; COPYRIGHT 2014 STMicroelectronics</center></h2>
00012   *
00013   * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
00014   * You may not use this file except in compliance with the License.
00015   * You may obtain a copy of the License at:
00016   *
00017   *        http://www.st.com/software_license_agreement_liberty_v2
00018   *
00019   * Unless required by applicable law or agreed to in writing, software 
00020   * distributed under the License is distributed on an "AS IS" BASIS, 
00021   * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
00022   * See the License for the specific language governing permissions and
00023   * limitations under the License.
00024   *
00025   ******************************************************************************
00026   */ 
00027 
00028 /* Includes ------------------------------------------------------------------*/
00029 #include "stm8s_it.h"
00030 
00031 /* Private typedef -----------------------------------------------------------*/
00032 /* Private define ------------------------------------------------------------*/
00033 /* Private macro -------------------------------------------------------------*/
00034 /* Private variables ---------------------------------------------------------*/
00035 /* Private function prototypes -----------------------------------------------*/
00036 /* Private functions ---------------------------------------------------------*/
00037 /* Public functions ----------------------------------------------------------*/
00038 
00039 /** @addtogroup IT_Functions
00040   * @{
00041   */
00042 #ifdef _COSMIC_
00043 /**
00044   * @brief  Dummy interrupt routine
00045   * @param  None
00046   * @retval None
00047   */
00048 INTERRUPT_HANDLER(NonHandledInterrupt, 25)
00049 {
00050   /* In order to detect unexpected events during development,
00051      it is recommended to set a breakpoint on the following instruction.
00052   */
00053 }
00054 #endif /*_COSMIC_*/
00055 
00056 /**
00057   * @brief  TRAP interrupt routine
00058   * @param  None
00059   * @retval None
00060   */
00061 INTERRUPT_HANDLER_TRAP(TRAP_IRQHandler)
00062 {
00063   /* In order to detect unexpected events during development,
00064      it is recommended to set a breakpoint on the following instruction.
00065   */
00066 }
00067 /**
00068   * @brief  Top Level Interrupt routine
00069   * @param  None
00070   * @retval None
00071   */
00072 INTERRUPT_HANDLER(TLI_IRQHandler, 0)
00073 {
00074   /* In order to detect unexpected events during development,
00075      it is recommended to set a breakpoint on the following instruction.
00076   */
00077 }
00078 
00079 /**
00080   * @brief  Auto Wake Up Interrupt routine
00081   * @param  None
00082   * @retval None
00083   */
00084 INTERRUPT_HANDLER(AWU_IRQHandler, 1)
00085 {
00086   /* In order to detect unexpected events during development,
00087      it is recommended to set a breakpoint on the following instruction.
00088   */
00089 }
00090 
00091 /**
00092   * @brief  Clock Controller Interrupt routine
00093   * @param  None
00094   * @retval None
00095   */
00096 INTERRUPT_HANDLER(CLK_IRQHandler, 2)
00097 {
00098   /* In order to detect unexpected events during development,
00099      it is recommended to set a breakpoint on the following instruction.
00100   */
00101 }
00102 
00103 /**
00104   * @brief  External Interrupt PORTA Interrupt routine
00105   * @param  None
00106   * @retval None
00107   */
00108 INTERRUPT_HANDLER(EXTI_PORTA_IRQHandler, 3)
00109 {
00110   /* In order to detect unexpected events during development,
00111      it is recommended to set a breakpoint on the following instruction.
00112   */
00113 }
00114 
00115 /**
00116   * @brief  External Interrupt PORTB Interrupt routine
00117   * @param  None
00118   * @retval None
00119   */
00120 INTERRUPT_HANDLER(EXTI_PORTB_IRQHandler, 4)
00121 {
00122   /* In order to detect unexpected events during development,
00123      it is recommended to set a breakpoint on the following instruction.
00124   */
00125 }
00126 
00127 /**
00128   * @brief  External Interrupt PORTC Interrupt routine
00129   * @param  None
00130   * @retval None
00131   */
00132 INTERRUPT_HANDLER(EXTI_PORTC_IRQHandler, 5)
00133 {
00134   /* In order to detect unexpected events during development,
00135      it is recommended to set a breakpoint on the following instruction.
00136   */
00137 }
00138 
00139 /**
00140   * @brief  External Interrupt PORTD Interrupt routine
00141   * @param  None
00142   * @retval None
00143   */
00144 INTERRUPT_HANDLER(EXTI_PORTD_IRQHandler, 6)
00145 {
00146   /* In order to detect unexpected events during development,
00147      it is recommended to set a breakpoint on the following instruction.
00148   */
00149 }
00150 
00151 /**
00152   * @brief  External Interrupt PORTE Interrupt routine
00153   * @param  None
00154   * @retval None
00155   */
00156 INTERRUPT_HANDLER(EXTI_PORTE_IRQHandler, 7)
00157 {
00158   /* In order to detect unexpected events during development,
00159      it is recommended to set a breakpoint on the following instruction.
00160   */
00161 }
00162 #ifdef STM8S903
00163 /**
00164   * @brief  External Interrupt PORTF Interrupt routine
00165   * @param  None
00166   * @retval None
00167   */
00168  INTERRUPT_HANDLER(EXTI_PORTF_IRQHandler, 8)
00169 {
00170   /* In order to detect unexpected events during development,
00171      it is recommended to set a breakpoint on the following instruction.
00172   */
00173 }
00174 #endif /*STM8S903*/
00175 
00176 #if defined (STM8S208) || defined (STM8AF52Ax)
00177 /**
00178   * @brief CAN RX Interrupt routine.
00179   * @param  None
00180   * @retval None
00181   */
00182  INTERRUPT_HANDLER(CAN_RX_IRQHandler, 8)
00183 {
00184   /* In order to detect unexpected events during development,
00185      it is recommended to set a breakpoint on the following instruction.
00186   */
00187 }
00188 
00189 /**
00190   * @brief  CAN TX Interrupt routine
00191   * @param  None
00192   * @retval None
00193   */
00194  INTERRUPT_HANDLER(CAN_TX_IRQHandler, 9)
00195 {
00196   /* In order to detect unexpected events during development,
00197      it is recommended to set a breakpoint on the following instruction.
00198   */
00199 }
00200 #endif /*STM8S208 || STM8AF52Ax */
00201 
00202 /**
00203   * @brief  SPI Interrupt routine
00204   * @param  None
00205   * @retval None
00206   */
00207 INTERRUPT_HANDLER(SPI_IRQHandler, 10)
00208 {
00209   /* In order to detect unexpected events during development,
00210      it is recommended to set a breakpoint on the following instruction.
00211   */
00212 }
00213 
00214 /**
00215   * @brief  Timer1 Update/Overflow/Trigger/Break Interrupt routine
00216   * @param  None
00217   * @retval None
00218   */
00219 INTERRUPT_HANDLER(TIM1_UPD_OVF_TRG_BRK_IRQHandler, 11)
00220 {
00221   /* In order to detect unexpected events during development,
00222      it is recommended to set a breakpoint on the following instruction.
00223   */
00224 }
00225 
00226 /**
00227   * @brief  Timer1 Capture/Compare Interrupt routine
00228   * @param  None
00229   * @retval None
00230   */
00231 INTERRUPT_HANDLER(TIM1_CAP_COM_IRQHandler, 12)
00232 {
00233   /* In order to detect unexpected events during development,
00234      it is recommended to set a breakpoint on the following instruction.
00235   */
00236 }
00237 
00238 #ifdef STM8S903
00239 /**
00240   * @brief  Timer5 Update/Overflow/Break/Trigger Interrupt routine
00241   * @param  None
00242   * @retval None
00243   */
00244  INTERRUPT_HANDLER(TIM5_UPD_OVF_BRK_TRG_IRQHandler, 13)
00245 {
00246   /* In order to detect unexpected events during development,
00247      it is recommended to set a breakpoint on the following instruction.
00248   */
00249 }
00250 /**
00251   * @brief  Timer5 Capture/Compare Interrupt routine
00252   * @param  None
00253   * @retval None
00254   */
00255  INTERRUPT_HANDLER(TIM5_CAP_COM_IRQHandler, 14)
00256 {
00257   /* In order to detect unexpected events during development,
00258      it is recommended to set a breakpoint on the following instruction.
00259   */
00260 }
00261 
00262 #else /*STM8S208, STM8S207, STM8S105 or STM8S103 or STM8AF62Ax or STM8AF52Ax or STM8AF626x */
00263 /**
00264   * @brief  Timer2 Update/Overflow/Break Interrupt routine
00265   * @param  None
00266   * @retval None
00267   */
00268  INTERRUPT_HANDLER(TIM2_UPD_OVF_BRK_IRQHandler, 13)
00269 {
00270   /* In order to detect unexpected events during development,
00271      it is recommended to set a breakpoint on the following instruction.
00272   */
00273 }
00274 
00275 /**
00276   * @brief  Timer2 Capture/Compare Interrupt routine
00277   * @param  None
00278   * @retval None
00279   */
00280  INTERRUPT_HANDLER(TIM2_CAP_COM_IRQHandler, 14)
00281 {
00282   /* In order to detect unexpected events during development,
00283      it is recommended to set a breakpoint on the following instruction.
00284   */
00285 }
00286 #endif /*STM8S903*/
00287 
00288 #if defined (STM8S208) || defined(STM8S207) || defined(STM8S007) || defined(STM8S105) || \
00289     defined(STM8S005) ||  defined (STM8AF62Ax) || defined (STM8AF52Ax) || defined (STM8AF626x)
00290 /**
00291   * @brief Timer3 Update/Overflow/Break Interrupt routine.
00292   * @param  None
00293   * @retval None
00294   */
00295  INTERRUPT_HANDLER(TIM3_UPD_OVF_BRK_IRQHandler, 15)
00296 {
00297   /* In order to detect unexpected events during development,
00298      it is recommended to set a breakpoint on the following instruction.
00299   */
00300 }
00301 
00302 /**
00303   * @brief  Timer3 Capture/Compare Interrupt routine
00304   * @param  None
00305   * @retval None
00306   */
00307  INTERRUPT_HANDLER(TIM3_CAP_COM_IRQHandler, 16)
00308 {
00309   /* In order to detect unexpected events during development,
00310      it is recommended to set a breakpoint on the following instruction.
00311   */
00312 }
00313 #endif /*STM8S208, STM8S207 or STM8S105 or STM8AF62Ax or STM8AF52Ax or STM8AF626x */
00314 
00315 #if defined (STM8S208) || defined(STM8S207) || defined(STM8S007) || defined(STM8S103) || \
00316     defined(STM8S003) ||  defined (STM8AF62Ax) || defined (STM8AF52Ax) || defined (STM8S903)
00317 /**
00318   * @brief  UART1 TX Interrupt routine
00319   * @param  None
00320   * @retval None
00321   */
00322  INTERRUPT_HANDLER(UART1_TX_IRQHandler, 17)
00323 {
00324   /* In order to detect unexpected events during development,
00325      it is recommended to set a breakpoint on the following instruction.
00326   */
00327 }
00328 
00329 /**
00330   * @brief  UART1 RX Interrupt routine
00331   * @param  None
00332   * @retval None
00333   */
00334  INTERRUPT_HANDLER(UART1_RX_IRQHandler, 18)
00335 {
00336   /* In order to detect unexpected events during development,
00337      it is recommended to set a breakpoint on the following instruction.
00338   */
00339 }
00340 #endif /*STM8S105*/
00341 
00342 /**
00343   * @brief  I2C Interrupt routine
00344   * @param  None
00345   * @retval None
00346   */
00347 INTERRUPT_HANDLER(I2C_IRQHandler, 19)
00348 {
00349   /* In order to detect unexpected events during development,
00350      it is recommended to set a breakpoint on the following instruction.
00351   */
00352 }
00353 
00354 #if defined(STM8S105) || defined(STM8S005) ||  defined (STM8AF626x)
00355 /**
00356   * @brief  UART2 TX interrupt routine.
00357   * @param  None
00358   * @retval None
00359   */
00360  INTERRUPT_HANDLER(UART2_TX_IRQHandler, 20)
00361 {
00362     /* In order to detect unexpected events during development,
00363        it is recommended to set a breakpoint on the following instruction.
00364     */
00365   }
00366 
00367 /**
00368   * @brief  UART2 RX interrupt routine.
00369   * @param  None
00370   * @retval None
00371   */
00372  INTERRUPT_HANDLER(UART2_RX_IRQHandler, 21)
00373 {
00374     /* In order to detect unexpected events during development,
00375        it is recommended to set a breakpoint on the following instruction.
00376     */
00377   }
00378 #endif /* STM8S105*/
00379 
00380 #if defined(STM8S207) || defined(STM8S007) || defined(STM8S208) || defined (STM8AF52Ax) || defined (STM8AF62Ax)
00381 /**
00382   * @brief  UART3 TX interrupt routine.
00383   * @param  None
00384   * @retval None
00385   */
00386  INTERRUPT_HANDLER(UART3_TX_IRQHandler, 20)
00387 {
00388     /* In order to detect unexpected events during development,
00389        it is recommended to set a breakpoint on the following instruction.
00390     */
00391   }
00392 
00393 /**
00394   * @brief  UART3 RX interrupt routine.
00395   * @param  None
00396   * @retval None
00397   */
00398  INTERRUPT_HANDLER(UART3_RX_IRQHandler, 21)
00399 {
00400     /* In order to detect unexpected events during development,
00401        it is recommended to set a breakpoint on the following instruction.
00402     */
00403   }
00404 #endif /*STM8S208 or STM8S207 or STM8AF52Ax or STM8AF62Ax */
00405 
00406 #if defined(STM8S207) || defined(STM8S007) || defined(STM8S208) || defined (STM8AF52Ax) || defined (STM8AF62Ax)
00407 /**
00408   * @brief  ADC2 interrupt routine.
00409   * @param  None
00410   * @retval None
00411   */
00412  INTERRUPT_HANDLER(ADC2_IRQHandler, 22)
00413 {
00414 
00415     /* In order to detect unexpected events during development,
00416        it is recommended to set a breakpoint on the following instruction.
00417     */
00418 }
00419 #else /*STM8S105, STM8S103 or STM8S903 or STM8AF626x */
00420 /**
00421   * @brief  ADC1 interrupt routine.
00422   * @param  None
00423   * @retval None
00424   */
00425  INTERRUPT_HANDLER(ADC1_IRQHandler, 22)
00426 {
00427 
00428     /* In order to detect unexpected events during development,
00429        it is recommended to set a breakpoint on the following instruction.
00430     */
00431 }
00432 #endif /*STM8S208 or STM8S207 or STM8AF52Ax or STM8AF62Ax */
00433 
00434 #ifdef STM8S903
00435 /**
00436   * @brief  Timer6 Update/Overflow/Trigger Interrupt routine
00437   * @param  None
00438   * @retval None
00439   */
00440 INTERRUPT_HANDLER(TIM6_UPD_OVF_TRG_IRQHandler, 23)
00441 {
00442   /* In order to detect unexpected events during development,
00443      it is recommended to set a breakpoint on the following instruction.
00444   */
00445 }
00446 #else /*STM8S208, STM8S207, STM8S105 or STM8S103 or STM8AF62Ax or STM8AF52Ax or STM8AF626x */
00447 /**
00448   * @brief  Timer4 Update/Overflow Interrupt routine
00449   * @param  None
00450   * @retval None
00451   */
00452  INTERRUPT_HANDLER(TIM4_UPD_OVF_IRQHandler, 23)
00453 {
00454   /* In order to detect unexpected events during development,
00455      it is recommended to set a breakpoint on the following instruction.
00456   */
00457 }
00458 #endif /*STM8S903*/
00459 
00460 /**
00461   * @brief  Eeprom EEC Interrupt routine
00462   * @param  None
00463   * @retval None
00464   */
00465 INTERRUPT_HANDLER(EEPROM_EEC_IRQHandler, 24)
00466 {
00467   /* In order to detect unexpected events during development,
00468      it is recommended to set a breakpoint on the following instruction.
00469   */
00470 }
00471 
00472 /**
00473   * @}
00474   */
00475 
00476 
00477 /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/