|
STM8S/A Standard Peripherals Firmware Library
|
Defines | |
| #define | CAN_IT_CONFIG_MASK ~(uint16_t)(CAN_IT_TME|CAN_IT_FMP|CAN_IT_FF|CAN_IT_FOV|CAN_IT_WKU|CAN_IT_EWG|CAN_IT_EPV|CAN_IT_BOF|CAN_IT_LEC|CAN_IT_ERR) |
| Macro used by the assert function in order to check the CAN Configuration interrupts. | |
| #define | IS_CAN_BITSEG1_OK(BS1) ((BS1) <= CAN_BitSeg1_16TimeQuantum) |
| Macro used by the assert function in order to check time quantum in bit segment 1 . | |
| #define | IS_CAN_BITSEG2_OK(BS2) ((((BS2) >= CAN_BitSeg2_2TimeQuantum) && ((BS2) <= CAN_BitSeg2_8TimeQuantum))|| ((BS2) == CAN_BitSeg2_1TimeQuantum)) |
| Macro used by the assert function in order to check time quantum in bit segment 2. | |
| #define | IS_CAN_DLC_OK(DLC) ((DLC) <= CAN_DLC_MAX) |
| Macro used by the assert function in order to check the DLC to be sent. | |
| #define | IS_CAN_EXTID_OK(EXTID) ((EXTID) <= ((uint32_t)CAN_EXTID_SIZE)) |
| Macro used by the assert function in order to check the Extended ID to be sent. | |
| #define | IS_CAN_FILTER_MODE_OK(MODE) |
| Macro used by the assert function in order to check CAN filter mode. | |
| #define | IS_CAN_FILTER_NUMBER_OK(NUMBER) |
| Macro used by the assert function in order to check CAN filter number. | |
| #define | IS_CAN_FILTER_SCALE_OK(SCALE) |
| Macro used by the assert function in order to check CAN filter scale. | |
| #define | IS_CAN_FLAG_CLEAR_OK(FLAG) |
| Macro used by the assert function in order to check CAN flags which can be cleared by CAN_ClearFlag. | |
| #define | IS_CAN_FLAG_STATUS_OK(FLAG) |
| Macro used by the assert function in order to check CAN flags which can be got by CAN_GetFlagStatus. | |
| #define | IS_CAN_IDTYPE_OK(IDTYPE) (((IDTYPE) == CAN_Id_Standard) || ((IDTYPE) == CAN_Id_Extended)) |
| Macro used by the assert function in order to check the type of the ID to be sent. | |
| #define | IS_CAN_IT_CONFIG_OK(IT) (((IT) != 0x0000) && ((uint16_t)((uint16_t)(IT) & (uint16_t)CAN_IT_CONFIG_MASK) == 0x0000)) |
| #define | IS_CAN_IT_PENDING_BIT_OK(IT) |
| Macro used by the assert function in order to check the CAN Pending bit interrupts. | |
| #define | IS_CAN_IT_STATUS_OK(IT) |
| Macro used by the assert function in order to check the CAN status interrupts. | |
| #define | IS_CAN_LAST_ERROR_CODE_OK(CODE) (((CODE) & 0x8F) == 0x00) |
| Macro used by the assert function in order to check the Last Error Code. | |
| #define | IS_CAN_MASTERCTRL_OK(MODE) |
| Macro used by the assert function in order to check CAN Time Triggered Communication mode. | |
| #define | IS_CAN_MODE_OK(MODE) |
| Macro used by the assert function in order to check CAN mode options . | |
| #define | IS_CAN_OPERATINGMODE_OK(MODE) |
| Macro used by the assert function in order to check CAN operating mode. | |
| #define | IS_CAN_PRESCALER_OK(PRESCALER) (((PRESCALER) >= 1) && ((PRESCALER) <= 64)) |
| Macro used by the assert function in order to check CAN clock prescaler. | |
| #define | IS_CAN_RTR_OK(RTR) (((RTR) == CAN_RTR_Data) || ((RTR) == CAN_RTR_Remote)) |
| Macro used by the assert function in order to check CAN transmission Frame Type. | |
| #define | IS_CAN_ST7_COMPATIBILITY_OK(STATE) (((STATE) == CAN_ST7Compatibility_Enable) || ((STATE) == CAN_ST7Compatibility_Disable)) |
| Macro used by the assert function in order to check the CAN ST7 Compatibility parameters. | |
| #define | IS_CAN_STDID_OK(STDID) ((STDID) <= ((uint16_t)CAN_STDID_SIZE)) |
| Macro used by the assert function in order to check the Standard ID to be sent. | |
| #define | IS_CAN_SYNJUMPWIDTH_OK(SJW) |
| Macro used by the assert function in order to check the CAN synchronisation jump width (SJW). | |
| #define | IS_CAN_TRANSMITMAILBOX_OK(TRANSMITMAILBOX) |
| Macro used by the assert function in order to check CAN Tx mailboxes. | |
Define Documentation
| #define CAN_IT_CONFIG_MASK ~(uint16_t)(CAN_IT_TME|CAN_IT_FMP|CAN_IT_FF|CAN_IT_FOV|CAN_IT_WKU|CAN_IT_EWG|CAN_IT_EPV|CAN_IT_BOF|CAN_IT_LEC|CAN_IT_ERR) |
Macro used by the assert function in order to check the CAN Configuration interrupts.
Definition at line 435 of file stm8s_can.h.
| #define IS_CAN_BITSEG1_OK | ( | BS1 | ) | ((BS1) <= CAN_BitSeg1_16TimeQuantum) |
Macro used by the assert function in order to check time quantum in bit segment 1 .
Definition at line 357 of file stm8s_can.h.
Referenced by CAN_Init().
| #define IS_CAN_BITSEG2_OK | ( | BS2 | ) | ((((BS2) >= CAN_BitSeg2_2TimeQuantum) && ((BS2) <= CAN_BitSeg2_8TimeQuantum))|| ((BS2) == CAN_BitSeg2_1TimeQuantum)) |
Macro used by the assert function in order to check time quantum in bit segment 2.
Definition at line 361 of file stm8s_can.h.
Referenced by CAN_Init().
| #define IS_CAN_DLC_OK | ( | DLC | ) | ((DLC) <= CAN_DLC_MAX) |
Macro used by the assert function in order to check the DLC to be sent.
Definition at line 406 of file stm8s_can.h.
Referenced by CAN_GetReceivedData(), and CAN_Transmit().
| #define IS_CAN_EXTID_OK | ( | EXTID | ) | ((EXTID) <= ((uint32_t)CAN_EXTID_SIZE)) |
Macro used by the assert function in order to check the Extended ID to be sent.
Definition at line 402 of file stm8s_can.h.
Referenced by CAN_Transmit().
| #define IS_CAN_FILTER_MODE_OK | ( | MODE | ) |
(((MODE) == CAN_FilterMode_IdMask) || \ ((MODE) == CAN_FilterMode_IdMask_IdList) || \ ((MODE) == CAN_FilterMode_IdList_IdMask) || \ ((MODE) == CAN_FilterMode_IdList))
Macro used by the assert function in order to check CAN filter mode.
Definition at line 378 of file stm8s_can.h.
Referenced by CAN_FilterInit().
| #define IS_CAN_FILTER_NUMBER_OK | ( | NUMBER | ) |
(((NUMBER) == CAN_FilterNumber_0) || \ ((NUMBER) == CAN_FilterNumber_1) || \ ((NUMBER) == CAN_FilterNumber_2) || \ ((NUMBER) == CAN_FilterNumber_3) || \ ((NUMBER) == CAN_FilterNumber_4) || \ ((NUMBER) == CAN_FilterNumber_5))
Macro used by the assert function in order to check CAN filter number.
Definition at line 369 of file stm8s_can.h.
Referenced by CAN_FilterInit().
| #define IS_CAN_FILTER_SCALE_OK | ( | SCALE | ) |
(((SCALE) == CAN_FilterScale_8Bit)|| \ ((SCALE) == CAN_FilterScale_16_8Bit) ||\ ((SCALE) == CAN_FilterScale_16Bit )||\ ((SCALE) == CAN_FilterScale_32Bit))
Macro used by the assert function in order to check CAN filter scale.
Definition at line 385 of file stm8s_can.h.
Referenced by CAN_FilterInit().
| #define IS_CAN_FLAG_CLEAR_OK | ( | FLAG | ) |
(((FLAG) == CAN_FLAG_RQCP0) || ((FLAG) == CAN_FLAG_RQCP1) ||\ ((FLAG) == CAN_FLAG_RQCP2) || ((FLAG) == CAN_FLAG_FF) ||\ ((FLAG) == CAN_FLAG_FOV) || ((FLAG) == CAN_FLAG_WKU) ||\ ((FLAG) == CAN_FLAG_LEC))
Macro used by the assert function in order to check CAN flags which can be cleared by CAN_ClearFlag.
Definition at line 428 of file stm8s_can.h.
Referenced by CAN_ClearFlag().
| #define IS_CAN_FLAG_STATUS_OK | ( | FLAG | ) |
(((FLAG) == CAN_FLAG_RQCP0) || ((FLAG) == CAN_FLAG_RQCP1) ||\ ((FLAG) == CAN_FLAG_RQCP2) || ((FLAG) == CAN_FLAG_FMP) ||\ ((FLAG) == CAN_FLAG_FF) || ((FLAG) == CAN_FLAG_FOV) ||\ ((FLAG) == CAN_FLAG_WKU) || ((FLAG) == CAN_FLAG_EWG) ||\ ((FLAG) == CAN_FLAG_EPV) || ((FLAG) == CAN_FLAG_BOF) ||\ ((FLAG) == CAN_FLAG_LEC))
Macro used by the assert function in order to check CAN flags which can be got by CAN_GetFlagStatus.
Definition at line 419 of file stm8s_can.h.
Referenced by CAN_GetFlagStatus().
| #define IS_CAN_IDTYPE_OK | ( | IDTYPE | ) | (((IDTYPE) == CAN_Id_Standard) || ((IDTYPE) == CAN_Id_Extended)) |
Macro used by the assert function in order to check the type of the ID to be sent.
Definition at line 410 of file stm8s_can.h.
Referenced by CAN_Transmit().
| #define IS_CAN_IT_CONFIG_OK | ( | IT | ) | (((IT) != 0x0000) && ((uint16_t)((uint16_t)(IT) & (uint16_t)CAN_IT_CONFIG_MASK) == 0x0000)) |
Definition at line 436 of file stm8s_can.h.
Referenced by CAN_ITConfig().
| #define IS_CAN_IT_PENDING_BIT_OK | ( | IT | ) |
(((IT) == CAN_IT_TME) || ((IT) == CAN_IT_FF) ||\ ((IT) == CAN_IT_FOV) || ((IT) == CAN_IT_WKU) ||\ ((IT) == CAN_IT_ERR) || ((IT) == CAN_IT_EWG) ||\ ((IT) == CAN_IT_EPV) || ((IT) == CAN_IT_BOF)||\ ((IT) == CAN_IT_LEC))
Macro used by the assert function in order to check the CAN Pending bit interrupts.
Definition at line 448 of file stm8s_can.h.
Referenced by CAN_ClearITPendingBit().
| #define IS_CAN_IT_STATUS_OK | ( | IT | ) |
(((IT) == CAN_IT_TME) || ((IT) == CAN_IT_FMP) ||\ ((IT) == CAN_IT_FF) || ((IT) == CAN_IT_FOV) || \ ((IT) == CAN_IT_WKU) || ((IT) == CAN_IT_ERR) || \ ((IT) == CAN_IT_EWG) || ((IT) == CAN_IT_EPV) || \ ((IT) == CAN_IT_BOF) || ((IT) == CAN_IT_LEC) )
Macro used by the assert function in order to check the CAN status interrupts.
Definition at line 440 of file stm8s_can.h.
Referenced by CAN_GetITStatus().
| #define IS_CAN_LAST_ERROR_CODE_OK | ( | CODE | ) | (((CODE) & 0x8F) == 0x00) |
Macro used by the assert function in order to check the Last Error Code.
Definition at line 456 of file stm8s_can.h.
| #define IS_CAN_MASTERCTRL_OK | ( | MODE | ) |
(((MODE) == CAN_MasterCtrl_AllDisabled) || \ (((MODE) <= CAN_MasterCtrl_AllEnabled) && ((MODE) >= CAN_MasterCtrl_TxFifoPriority)))
Macro used by the assert function in order to check CAN Time Triggered Communication mode.
Definition at line 342 of file stm8s_can.h.
Referenced by CAN_Init().
| #define IS_CAN_MODE_OK | ( | MODE | ) |
(((MODE) == CAN_Mode_Normal) || ((MODE) == CAN_Mode_LoopBack)|| \ ((MODE) == CAN_Mode_Silent) || ((MODE) == CAN_Mode_Silent_LoopBack))
Macro used by the assert function in order to check CAN mode options .
Definition at line 347 of file stm8s_can.h.
Referenced by CAN_Init().
| #define IS_CAN_OPERATINGMODE_OK | ( | MODE | ) |
(((MODE) == CAN_OperatingMode_Initialization) ||\ ((MODE) == CAN_OperatingMode_Normal)|| \ ((MODE) == CAN_OperatingMode_Sleep))
Macro used by the assert function in order to check CAN operating mode.
Definition at line 336 of file stm8s_can.h.
Referenced by CAN_OperatingModeRequest().
| #define IS_CAN_PRESCALER_OK | ( | PRESCALER | ) | (((PRESCALER) >= 1) && ((PRESCALER) <= 64)) |
Macro used by the assert function in order to check CAN clock prescaler.
Definition at line 365 of file stm8s_can.h.
Referenced by CAN_Init().
| #define IS_CAN_RTR_OK | ( | RTR | ) | (((RTR) == CAN_RTR_Data) || ((RTR) == CAN_RTR_Remote)) |
Macro used by the assert function in order to check CAN transmission Frame Type.
Definition at line 414 of file stm8s_can.h.
Referenced by CAN_Transmit().
| #define IS_CAN_ST7_COMPATIBILITY_OK | ( | STATE | ) | (((STATE) == CAN_ST7Compatibility_Enable) || ((STATE) == CAN_ST7Compatibility_Disable)) |
Macro used by the assert function in order to check the CAN ST7 Compatibility parameters.
Definition at line 332 of file stm8s_can.h.
Referenced by CAN_ST7CompatibilityCmd().
| #define IS_CAN_STDID_OK | ( | STDID | ) | ((STDID) <= ((uint16_t)CAN_STDID_SIZE)) |
Macro used by the assert function in order to check the Standard ID to be sent.
Definition at line 398 of file stm8s_can.h.
Referenced by CAN_Transmit().
| #define IS_CAN_SYNJUMPWIDTH_OK | ( | SJW | ) |
(((SJW) == CAN_SynJumpWidth_1TimeQuantum) || ((SJW) == CAN_SynJumpWidth_2TimeQuantum)|| \ ((SJW) == CAN_SynJumpWidth_3TimeQuantum) || ((SJW) == CAN_SynJumpWidth_4TimeQuantum))
Macro used by the assert function in order to check the CAN synchronisation jump width (SJW).
Definition at line 352 of file stm8s_can.h.
Referenced by CAN_Init().
| #define IS_CAN_TRANSMITMAILBOX_OK | ( | TRANSMITMAILBOX | ) |
(((TRANSMITMAILBOX) == CAN_TransmitMailBox_0) || \ ((TRANSMITMAILBOX) == CAN_TransmitMailBox_1) || \ ((TRANSMITMAILBOX) == CAN_TransmitMailBox_2))
Macro used by the assert function in order to check CAN Tx mailboxes.
Definition at line 392 of file stm8s_can.h.
Referenced by CAN_CancelTransmit(), and CAN_TransmitStatus().