STM8S_StdPeriph_Examples/SPI/SPI_FullDuplexUART1/main.c File Reference

This file contains the main function for SPI full duplex communication with UART1 example. More...

#include "stm8s.h"

Go to the source code of this file.

Defines
#define	countof(a)   (sizeof(a) / sizeof(*(a)))
#define	TxBufferSize1   (countof(TxBuffer1) - 1)
#define	TxBufferSize2   (countof(TxBuffer2) - 1)
Enumerations
enum	TestStatus {   FAILED = 0, PASSED = !FAILED, FAILED = 0, PASSED = !FAILED,   FAILED = 0, PASSED = !FAILED, FAILED = 0, PASSED = !FAILED,   FAILED = 0, PASSED = !FAILED, FAILED = 0, PASSED = !FAILED,   FAILED = 0, PASSED = !FAILED, FAILED = 0, PASSED = !FAILED,   FAILED = 0, PASSED = !FAILED, FAILED = 0, PASSED = !FAILED }
Functions
TestStatus	Buffercmp (uint8_t *pBuffer1, uint8_t *pBuffer2, uint16_t BufferLength)
	Compares two buffers.
void	Delay (uint16_t nCount)
	Delay.
void	main (void)
	Main program.
Variables
uint8_t	NbrOfDataToRead = TxBufferSize1
uint8_t	RxBuffer1 [TxBufferSize2] = {0}
uint8_t	RxBuffer2 [TxBufferSize1] = {0}
__IO uint8_t	RxCounter = 0
volatile TestStatus	TransferStatus1 = FAILED
volatile TestStatus	TransferStatus2 = FAILED
uint8_t	TxBuffer1 [] = "UART1 Example: UART1 -> SPI using TXE and RXNE Flags"
uint8_t	TxBuffer2 [] = "UART1 Example: SPI -> UART1 using TXE and RXNE Flags"
__IO uint8_t	TxCounter = 0

---

Detailed Description

This file contains the main function for SPI full duplex communication with UART1 example.

Author:

MCD Application Team

Version:

V2.2.0

Date:

30-September-2014

Attention:

© COPYRIGHT 2014 STMicroelectronics

Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); You may not use this file except in compliance with the License. You may obtain a copy of the License at:

http://www.st.com/software_license_agreement_liberty_v2

Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License.

Definition in file STM8S_StdPeriph_Examples/SPI/SPI_FullDuplexUART1/main.c.