STM8S/A Standard Peripherals Firmware Library: FLASH_DataProgram

STM8S/A

previous page next page
STM8S/A Standard Peripherals Firmware Library
Defines | Enumerations | Functions | Variables
FLASH_DataProgram

Defines

#define BLOCK_OPERATION   0

Enumerations

enum  TestStatus {
  FAILED = 0, PASSED = !FAILED, FAILED = 0, PASSED = !FAILED,
  FAILED = 0, PASSED = !FAILED, FAILED = 0, PASSED = !FAILED,
  FAILED = 0, PASSED = !FAILED, FAILED = 0, PASSED = !FAILED,
  FAILED = 0, PASSED = !FAILED, FAILED = 0, PASSED = !FAILED,
  FAILED = 0, PASSED = !FAILED, FAILED = 0, PASSED = !FAILED
}

Functions

static void CLK_Config (void)
 Configure system clock to run at 16Mhz.
void Delay (uint16_t nCount)
 Delay.
static void FLASH_Config (void)
 Configure the FLASH for block programming.
static void GPIO_Config (void)
 Configure GPIO for LEDs available on the evaluation board.
 INTERRUPT_HANDLER (TLI_IRQHandler, 0)
 Top Level Interrupt routine.
 INTERRUPT_HANDLER (AWU_IRQHandler, 1)
 Auto Wake Up Interrupt routine.
 INTERRUPT_HANDLER (CLK_IRQHandler, 2)
 Clock Controller Interrupt routine.
 INTERRUPT_HANDLER (EXTI_PORTA_IRQHandler, 3)
 External Interrupt PORTA Interrupt routine.
 INTERRUPT_HANDLER (EXTI_PORTB_IRQHandler, 4)
 External Interrupt PORTB Interrupt routine.
 INTERRUPT_HANDLER (EXTI_PORTC_IRQHandler, 5)
 External Interrupt PORTC Interrupt routine.
 INTERRUPT_HANDLER (EXTI_PORTD_IRQHandler, 6)
 External Interrupt PORTD Interrupt routine.
 INTERRUPT_HANDLER (EXTI_PORTE_IRQHandler, 7)
 External Interrupt PORTE Interrupt routine.
 INTERRUPT_HANDLER (SPI_IRQHandler, 10)
 SPI Interrupt routine.
 INTERRUPT_HANDLER (TIM1_UPD_OVF_TRG_BRK_IRQHandler, 11)
 Timer1 Update/Overflow/Trigger/Break Interrupt routine.
 INTERRUPT_HANDLER (TIM1_CAP_COM_IRQHandler, 12)
 Timer1 Capture/Compare Interrupt routine.
 INTERRUPT_HANDLER (TIM2_UPD_OVF_BRK_IRQHandler, 13)
 Timer2 Update/Overflow/Break Interrupt routine.
 INTERRUPT_HANDLER (TIM2_CAP_COM_IRQHandler, 14)
 Timer2 Capture/Compare Interrupt routine.
 INTERRUPT_HANDLER (I2C_IRQHandler, 19)
 I2C Interrupt routine.
 INTERRUPT_HANDLER (ADC1_IRQHandler, 22)
 ADC1 interrupt routine.
 INTERRUPT_HANDLER (TIM4_UPD_OVF_IRQHandler, 23)
 Timer4 Update/Overflow Interrupt routine.
 INTERRUPT_HANDLER (EEPROM_EEC_IRQHandler, 24)
 Eeprom EEC Interrupt routine.
 INTERRUPT_HANDLER_TRAP (TRAP_IRQHandler)
 TRAP interrupt routine.
void main (void)
 Main program.

Variables

uint8_t GBuffer [FLASH_BLOCK_SIZE]
__IO TestStatus OperationStatus

Define Documentation

#define BLOCK_OPERATION   0

Definition at line 39 of file STM8S_StdPeriph_Examples/FLASH/FLASH_DataProgram/main.c.

Referenced by main().

Enumeration Type Documentation

enum TestStatus
Enumerator:
FAILED 
PASSED 
FAILED 
PASSED 
FAILED 
PASSED 
FAILED 
PASSED 
FAILED 
PASSED 
FAILED 
PASSED 
FAILED 
PASSED 
FAILED 
PASSED 
FAILED 
PASSED 
FAILED 
PASSED 

Definition at line 37 of file STM8S_StdPeriph_Examples/FLASH/FLASH_DataProgram/main.c.

Function Documentation

static void CLK_Config ( void  ) [static]

Configure system clock to run at 16Mhz.

Parameters:
None
Return values:
None
void Delay ( uint16_t  nCount)

Delay.

Parameters:
nCount
Return values:
None

Definition at line 297 of file STM8S_StdPeriph_Examples/AWU/AWU_ActiveHaltMode/main.c.

void FLASH_Config ( void  ) [static]

Configure the FLASH for block programming.

Parameters:
None
Return values:
None

Definition at line 204 of file STM8S_StdPeriph_Examples/FLASH/FLASH_DataProgram/main.c.

References FLASH_FLAG_DUL, FLASH_FLAG_PUL, FLASH_GetFlagStatus(), FLASH_MEMTYPE_DATA, FLASH_MEMTYPE_PROG, FLASH_PROGRAMTIME_STANDARD, FLASH_SetProgrammingTime(), FLASH_Unlock(), and RESET.

Referenced by main().

static void GPIO_Config ( void  ) [static]

Configure GPIO for LEDs available on the evaluation board.

Parameters:
None
Return values:
None
INTERRUPT_HANDLER ( TLI_IRQHandler  ,
0   
)

Top Level Interrupt routine.

Parameters:
None
Return values:
None

Definition at line 88 of file STM8S_StdPeriph_Examples/FLASH/FLASH_DataProgram/stm8s_it.c.

INTERRUPT_HANDLER ( AWU_IRQHandler  ,
1   
)

Auto Wake Up Interrupt routine.

Parameters:
None
Return values:
None

Definition at line 101 of file STM8S_StdPeriph_Examples/FLASH/FLASH_DataProgram/stm8s_it.c.

INTERRUPT_HANDLER ( CLK_IRQHandler  ,
2   
)

Clock Controller Interrupt routine.

Parameters:
None
Return values:
None

Definition at line 114 of file STM8S_StdPeriph_Examples/FLASH/FLASH_DataProgram/stm8s_it.c.

INTERRUPT_HANDLER ( EXTI_PORTA_IRQHandler  ,
3   
)

External Interrupt PORTA Interrupt routine.

Parameters:
None
Return values:
None

Definition at line 127 of file STM8S_StdPeriph_Examples/FLASH/FLASH_DataProgram/stm8s_it.c.

INTERRUPT_HANDLER ( EXTI_PORTB_IRQHandler  ,
4   
)

External Interrupt PORTB Interrupt routine.

Parameters:
None
Return values:
None

Definition at line 139 of file STM8S_StdPeriph_Examples/FLASH/FLASH_DataProgram/stm8s_it.c.

INTERRUPT_HANDLER ( EXTI_PORTC_IRQHandler  ,
5   
)

External Interrupt PORTC Interrupt routine.

Parameters:
None
Return values:
None

Definition at line 152 of file STM8S_StdPeriph_Examples/FLASH/FLASH_DataProgram/stm8s_it.c.

INTERRUPT_HANDLER ( EXTI_PORTD_IRQHandler  ,
6   
)

External Interrupt PORTD Interrupt routine.

Parameters:
None
Return values:
None

Definition at line 165 of file STM8S_StdPeriph_Examples/FLASH/FLASH_DataProgram/stm8s_it.c.

INTERRUPT_HANDLER ( EXTI_PORTE_IRQHandler  ,
7   
)

External Interrupt PORTE Interrupt routine.

Parameters:
None
Return values:
None

Definition at line 178 of file STM8S_StdPeriph_Examples/FLASH/FLASH_DataProgram/stm8s_it.c.

INTERRUPT_HANDLER ( SPI_IRQHandler  ,
10   
)

SPI Interrupt routine.

Parameters:
None
Return values:
None

Definition at line 233 of file STM8S_StdPeriph_Examples/FLASH/FLASH_DataProgram/stm8s_it.c.

INTERRUPT_HANDLER ( TIM1_UPD_OVF_TRG_BRK_IRQHandler  ,
11   
)

Timer1 Update/Overflow/Trigger/Break Interrupt routine.

Parameters:
None
Return values:
None

Definition at line 246 of file STM8S_StdPeriph_Examples/FLASH/FLASH_DataProgram/stm8s_it.c.

INTERRUPT_HANDLER ( TIM1_CAP_COM_IRQHandler  ,
12   
)

Timer1 Capture/Compare Interrupt routine.

Parameters:
None
Return values:
None

Definition at line 259 of file STM8S_StdPeriph_Examples/FLASH/FLASH_DataProgram/stm8s_it.c.

INTERRUPT_HANDLER ( TIM2_UPD_OVF_BRK_IRQHandler  ,
13   
)

Timer2 Update/Overflow/Break Interrupt routine.

Parameters:
None
Return values:
None

Definition at line 299 of file STM8S_StdPeriph_Examples/FLASH/FLASH_DataProgram/stm8s_it.c.

INTERRUPT_HANDLER ( TIM2_CAP_COM_IRQHandler  ,
14   
)

Timer2 Capture/Compare Interrupt routine.

Parameters:
None
Return values:
None

Definition at line 312 of file STM8S_StdPeriph_Examples/FLASH/FLASH_DataProgram/stm8s_it.c.

INTERRUPT_HANDLER ( I2C_IRQHandler  ,
19   
)

I2C Interrupt routine.

Parameters:
None
Return values:
None

Definition at line 384 of file STM8S_StdPeriph_Examples/FLASH/FLASH_DataProgram/stm8s_it.c.

INTERRUPT_HANDLER ( ADC1_IRQHandler  ,
22   
)

ADC1 interrupt routine.

Parameters:
None
Return values:
None

Definition at line 466 of file STM8S_StdPeriph_Examples/FLASH/FLASH_DataProgram/stm8s_it.c.

INTERRUPT_HANDLER ( TIM4_UPD_OVF_IRQHandler  ,
23   
)

Timer4 Update/Overflow Interrupt routine.

Parameters:
None
Return values:
None

Definition at line 494 of file STM8S_StdPeriph_Examples/FLASH/FLASH_DataProgram/stm8s_it.c.

INTERRUPT_HANDLER ( EEPROM_EEC_IRQHandler  ,
24   
)

Eeprom EEC Interrupt routine.

Parameters:
None
Return values:
None

Definition at line 508 of file STM8S_StdPeriph_Examples/FLASH/FLASH_DataProgram/stm8s_it.c.

INTERRUPT_HANDLER_TRAP ( TRAP_IRQHandler  )

TRAP interrupt routine.

Parameters:
None
Return values:
None

Definition at line 74 of file STM8S_StdPeriph_Examples/FLASH/FLASH_DataProgram/stm8s_it.c.

void main ( void  )

Main program.

Parameters:
None
Return values:
None

Definition at line 71 of file STM8S_StdPeriph_Examples/FLASH/FLASH_DataProgram/main.c.

References BLOCK_OPERATION, CLK_Config(), Delay(), FAILED, FLASH_Config(), FLASH_GetFlagStatus(), FLASH_MEMTYPE_DATA, FLASH_PROGRAMMODE_STANDARD, FLASH_ReadByte(), GBuffer, GPIO_Config(), i, LED1, LED2, LED3, OperationStatus, PASSED, PointerAttr, RESET, and STM_EVAL_LEDToggle().

Variable Documentation

uint8_t GBuffer[FLASH_BLOCK_SIZE]

Definition at line 42 of file STM8S_StdPeriph_Examples/FLASH/FLASH_DataProgram/main.c.

Referenced by main().

__IO TestStatus OperationStatus

Definition at line 43 of file STM8S_StdPeriph_Examples/FLASH/FLASH_DataProgram/main.c.

STM8 Standard Peripherals Library: Footer

 

 

 

      For complete documentation on STM8 8-bit Microcontrollers platform visit www.st.com

 

previous page start next page