ColdFire Platform Configuration Parameters

Detailed Description

This section describes parameters that are specific only for the ColdFire platform.
The user may override and change the default values in the application-specific configuration file fnet_user_config.h.

Macros
#define	FNET_CFG_MCF_V1
	ColdFire V1 (Flexis): More...
#define	FNET_CFG_MCF_TIMER_DTIM
	The DMA Timer (DTIM) module: More...
#define	FNET_CFG_MCF_TIMER_PIT
	The Programmable Interrupt Timer (PIT) module: More...
#define	FNET_CFG_MCF_TIMER_RTC8
	The 8-bit Real-Time Counter (RTC) module: More...
#define	FNET_CFG_MCF_IPSBAR
	Internal Peripheral System Base Address. NOTE: It's ignored for MCF V1. . More...
#define	FNET_CFG_MCF_CACHE_CACR   (0)
	Cache Control Register (CACR) default value, used during cache invalidation. It is used only when FNET_CFG_CPU_CACHE is enabled. . More...
#define	FNET_CFG_MCF_RCM
	Reset Controller Module (RCM): More...
#define	FNET_CFG_MCF_UART
	The Universal Asynchronous Receiver/Transmitters (UART) module: More...
#define	FNET_CFG_MCF_SCI
	The Serial Communication Interface (SCI) module: More...