FNET_CFG_CPU_ETH0 FNET_CFG_CPU_ETH0_MTU FNET_CFG_CPU_ETH0_NAME FNET_CFG_CPU_ETH0_PHY_ADDR FNET_CFG_CPU_ETH0_VECTOR_NUMBER FNET_CFG_CPU_ETH1 FNET_CFG_CPU_ETH1_MTU FNET_CFG_CPU_ETH1_NAME FNET_CFG_CPU_ETH1_PHY_ADDR FNET_CFG_CPU_ETH1_VECTOR_NUMBER FNET_CFG_CPU_ETH_ATONEGOTIATION_TIMEOUT FNET_CFG_CPU_ETH_FULL_DUPLEX FNET_CFG_CPU_ETH_HW_RX_IP_CHECKSUM FNET_CFG_CPU_ETH_HW_RX_MAC_ERR FNET_CFG_CPU_ETH_HW_RX_PROTOCOL_CHECKSUM FNET_CFG_CPU_ETH_HW_TX_IP_CHECKSUM FNET_CFG_CPU_ETH_HW_TX_PROTOCOL_CHECKSUM FNET_CFG_CPU_ETH_IO_INIT FNET_CFG_CPU_ETH_MIB FNET_CFG_CPU_ETH_PHY_ADDR_DISCOVER FNET_CFG_CPU_ETH_PROMISCUOUS FNET_CFG_CPU_ETH_RMII FNET_CFG_CPU_ETH_RMII_10T FNET_CFG_CPU_ETH_RX_BUFS_MAX FNET_CFG_CPU_ETH_TX_BUFS_MAX FNET_CFG_CPU_ETH_VECTOR_PRIORITY FNET_CFG_CPU_WIFI FNET_CFG_CPU_WIFI_FW_UPDATE FNET_CFG_CPU_WIFI_IO_INIT FNET_CFG_CPU_WIFI_NAME

#define FNET_CFG_CPU_ETH_HW_TX_PROTOCOL_CHECKSUM Insertion of protocol checksum by Ethernet-module: 1 = is enabled. If an IP frame with a known protocol (UDP, TCP or ICMP) is transmitted, the checksum is inserted automatically into the frame. The checksum field must be cleared. The other frames are not modified. It is supported only by ENET module (K60). 0 = is disabled. Checksum not inserted. NOTE: User application should not change this parameter. Definition at line 827 of file fnet_cpu_config.h.