FNET_CFG_CPU_ETH0 FNET_CFG_CPU_ETH0_MTU FNET_CFG_CPU_ETH0_NAME FNET_CFG_CPU_ETH0_PHY_ADDR FNET_CFG_CPU_ETH0_VECTOR_NUMBER FNET_CFG_CPU_ETH1 FNET_CFG_CPU_ETH1_MTU FNET_CFG_CPU_ETH1_NAME FNET_CFG_CPU_ETH1_PHY_ADDR FNET_CFG_CPU_ETH1_VECTOR_NUMBER FNET_CFG_CPU_ETH_ATONEGOTIATION_TIMEOUT FNET_CFG_CPU_ETH_FULL_DUPLEX FNET_CFG_CPU_ETH_HW_RX_IP_CHECKSUM FNET_CFG_CPU_ETH_HW_RX_MAC_ERR FNET_CFG_CPU_ETH_HW_RX_PROTOCOL_CHECKSUM FNET_CFG_CPU_ETH_HW_TX_IP_CHECKSUM FNET_CFG_CPU_ETH_HW_TX_PROTOCOL_CHECKSUM FNET_CFG_CPU_ETH_IO_INIT FNET_CFG_CPU_ETH_MIB FNET_CFG_CPU_ETH_PHY_ADDR_DISCOVER FNET_CFG_CPU_ETH_PROMISCUOUS FNET_CFG_CPU_ETH_RMII FNET_CFG_CPU_ETH_RMII_10T FNET_CFG_CPU_ETH_RX_BUFS_MAX FNET_CFG_CPU_ETH_TX_BUFS_MAX FNET_CFG_CPU_ETH_VECTOR_PRIORITY FNET_CFG_CPU_WIFI FNET_CFG_CPU_WIFI_FW_UPDATE FNET_CFG_CPU_WIFI_IO_INIT FNET_CFG_CPU_WIFI_NAME

#define FNET_CFG_CPU_ETH_HW_RX_PROTOCOL_CHECKSUM Discard of frames with wrong protocol checksum by Ethernet-module: 1 = is enabled. If a TCP, UDP or ICMP frame is received that has a wrong checksum, the frame is discarded. It is supported only by ENET module (K60). 0 = is disabled. Frames with wrong checksum are not discarded. NOTE: User application should not change this parameter. Definition at line 854 of file fnet_cpu_config.h.