|
STSW-STLKT01
|
This file provides the BLE driver for the Sensor Tile board. More...
Go to the source code of this file.
Macros | |
| #define | HEADER_SIZE 5 |
| #define | MAX_BUFFER_SIZE 255 |
| #define | TIMEOUT_DURATION 15 |
Functions | |
| static void | us150Delay (void) |
| Utility function for delay. More... | |
| void | set_irq_as_output (void) |
| Set in Output mode the IRQ. More... | |
| void | set_irq_as_input (void) |
| Set the IRQ in input mode. More... | |
| void | HAL_SPI_MspInit (SPI_HandleTypeDef *hspi) |
| This function is used for low level initialization of the SPI communication with the BlueNRG Expansion Board. More... | |
| void | Hal_Write_Serial (const void *data1, const void *data2, int32_t n_bytes1, int32_t n_bytes2) |
| Writes data to a serial interface. More... | |
| void | BNRG_SPI_Init (void) |
| Initializes the SPI communication with the BlueNRG Expansion Board. More... | |
| void | BlueNRG_RST (void) |
| Resets the BlueNRG. More... | |
| uint8_t | BlueNRG_DataPresent (void) |
| Reports if the BlueNRG has data for the host micro. More... | |
| void | BlueNRG_HW_Bootloader (void) |
| Activate internal bootloader using pin. More... | |
| int32_t | BlueNRG_SPI_Read_All (SPI_HandleTypeDef *hspi, uint8_t *buffer, uint8_t buff_size) |
| Reads from BlueNRG SPI buffer and store data into local buffer. More... | |
| int32_t | BlueNRG_SPI_Write (SPI_HandleTypeDef *hspi, uint8_t *data1, uint8_t *data2, uint8_t Nb_bytes1, uint8_t Nb_bytes2) |
| Writes data from local buffer to SPI. More... | |
| void | Enable_SPI_IRQ (void) |
| Enable SPI IRQ. More... | |
| void | Disable_SPI_IRQ (void) |
| Disable SPI IRQ. More... | |
| void | Clear_SPI_IRQ (void) |
| Clear Pending SPI IRQ. More... | |
| void | Clear_SPI_EXTI_Flag (void) |
| Clear EXTI (External Interrupt) line for SPI IRQ. More... | |
Variables | |
| SPI_HandleTypeDef | SpiHandle |
Detailed Description
This file provides the BLE driver for the Sensor Tile board.
- Author
- Central Labs
- Version
- V1.3.1
- Date
- 27-Apr-2017
- Attention
© COPYRIGHT(c) 2014 STMicroelectronics
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:
- Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
- Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
- Neither the name of STMicroelectronics nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
Definition in file SensorTile_BlueNRG.c.
Generated by
1.8.13