SensorTile_pressure.h File Reference

This file contains definitions for SensorTile_pressure.c driver. More...

#include "LPS22HB_Driver_HL.h" #include "SensorTile.h"

Go to the source code of this file.

Macros
#define	PRESSURE_SENSORS_MAX_NUM   1

Enumerations
enum	PRESSURE_ID_t { PRESSURE_SENSORS_AUTO = -1, LPS22HB_P_0 }

Functions
DrvStatusTypeDef	BSP_PRESSURE_Init (PRESSURE_ID_t id, void **handle)
	Initialize a pressure sensor. More...
DrvStatusTypeDef	BSP_PRESSURE_DeInit (void **handle)
	Deinitialize a pressure sensor. More...
DrvStatusTypeDef	BSP_PRESSURE_Sensor_Enable (void *handle)
	Enable pressure sensor. More...
DrvStatusTypeDef	BSP_PRESSURE_Sensor_Disable (void *handle)
	Disable pressure sensor. More...
DrvStatusTypeDef	BSP_PRESSURE_IsInitialized (void *handle, uint8_t *status)
	Check if the pressure sensor is initialized. More...
DrvStatusTypeDef	BSP_PRESSURE_IsEnabled (void *handle, uint8_t *status)
	Check if the pressure sensor is enabled. More...
DrvStatusTypeDef	BSP_PRESSURE_IsCombo (void *handle, uint8_t *status)
	Check if the pressure sensor is combo. More...
DrvStatusTypeDef	BSP_PRESSURE_Get_Instance (void *handle, uint8_t *instance)
	Get the pressure sensor instance. More...
DrvStatusTypeDef	BSP_PRESSURE_Get_WhoAmI (void *handle, uint8_t *who_am_i)
	Get the WHO_AM_I ID of the pressure sensor. More...
DrvStatusTypeDef	BSP_PRESSURE_Check_WhoAmI (void *handle)
	Check the WHO_AM_I ID of the pressure sensor. More...
DrvStatusTypeDef	BSP_PRESSURE_Get_Press (void *handle, float *pressure)
	Get the pressure value. More...
DrvStatusTypeDef	BSP_PRESSURE_Get_ODR (void *handle, float *odr)
	Get the pressure sensor output data rate. More...
DrvStatusTypeDef	BSP_PRESSURE_Set_ODR (void *handle, SensorOdr_t odr)
	Set the pressure sensor output data rate. More...
DrvStatusTypeDef	BSP_PRESSURE_Set_ODR_Value (void *handle, float odr)
	Set the pressure sensor output data rate. More...
DrvStatusTypeDef	BSP_PRESSURE_Read_Reg (void *handle, uint8_t reg, uint8_t *data)
	Read the data from register. More...
DrvStatusTypeDef	BSP_PRESSURE_Write_Reg (void *handle, uint8_t reg, uint8_t data)
	Write the data to register. More...
DrvStatusTypeDef	BSP_PRESSURE_Get_DRDY_Status (void *handle, uint8_t *status)
	Get pressure data ready status. More...

Detailed Description

This file contains definitions for SensorTile_pressure.c driver.

Author

Central Labs

Version

V1.3.1

Date

27-Apr-2017

Attention

© COPYRIGHT(c) 2016 STMicroelectronics

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
3. Neither the name of STMicroelectronics nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

Definition in file SensorTile_pressure.h.