STM8S/A Standard Peripherals Firmware Library: stm8s_it.c Source File

00001 /**
00002   ******************************************************************************
00003   * @file     stm8s_it.c
00004   * @author   MCD Application Team
00005   * @version  V2.2.0
00006   * @date     30-September-2014
00007   * @brief    Main Interrupt Service Routines.
00008   ******************************************************************************
00009   * @attention
00010   *
00011   * <h2><center>&copy; COPYRIGHT 2014 STMicroelectronics</center></h2>
00012   *
00013   * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
00014   * You may not use this file except in compliance with the License.
00015   * You may obtain a copy of the License at:
00016   *
00017   *        http://www.st.com/software_license_agreement_liberty_v2
00018   *
00019   * Unless required by applicable law or agreed to in writing, software 
00020   * distributed under the License is distributed on an "AS IS" BASIS, 
00021   * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
00022   * See the License for the specific language governing permissions and
00023   * limitations under the License.
00024   *
00025   ******************************************************************************
00026   */ 
00027 
00028 /* Includes ------------------------------------------------------------------*/
00029 #include "stm8s_it.h"
00030 
00031 /** @addtogroup UART1_IrDA_Receive
00032   * @{
00033   */
00034 /* Private typedef -----------------------------------------------------------*/
00035 /* Private define ------------------------------------------------------------*/
00036 /* Private macro -------------------------------------------------------------*/
00037 /* Private variables ---------------------------------------------------------*/
00038 /* Private function prototypes -----------------------------------------------*/
00039 /* Private functions ---------------------------------------------------------*/
00040 
00041 /* Public functions ----------------------------------------------------------*/
00042 
00043 #ifdef _COSMIC_
00044 /**
00045   * @brief  Dummy interrupt routine
00046   * @param  None
00047   * @retval None
00048   */
00049 INTERRUPT_HANDLER(NonHandledInterrupt, 25)
00050 {
00051   /* In order to detect unexpected events during development,
00052      it is recommended to set a breakpoint on the following instruction.
00053   */
00054 }
00055 #endif /*_COSMIC_*/
00056 
00057 /**
00058   * @brief  TRAP interrupt routine
00059   * @param  None
00060   * @retval None
00061   */
00062 INTERRUPT_HANDLER_TRAP(TRAP_IRQHandler)
00063 {
00064   /* In order to detect unexpected events during development,
00065      it is recommended to set a breakpoint on the following instruction.
00066   */
00067 }
00068 /**
00069   * @brief  Top Level Interrupt routine
00070   * @param  None
00071   * @retval None
00072   */
00073 INTERRUPT_HANDLER(TLI_IRQHandler, 0)
00074 {
00075   /* In order to detect unexpected events during development,
00076      it is recommended to set a breakpoint on the following instruction.
00077   */
00078 }
00079 
00080 /**
00081   * @brief  Auto Wake Up Interrupt routine
00082   * @param  None
00083   * @retval None
00084   */
00085 INTERRUPT_HANDLER(AWU_IRQHandler, 1)
00086 {
00087   /* In order to detect unexpected events during development,
00088      it is recommended to set a breakpoint on the following instruction.
00089   */
00090 }
00091 
00092 /**
00093   * @brief  Clock Controller Interrupt routine
00094   * @param  None
00095   * @retval None
00096   */
00097 INTERRUPT_HANDLER(CLK_IRQHandler, 2)
00098 {
00099   /* In order to detect unexpected events during development,
00100      it is recommended to set a breakpoint on the following instruction.
00101   */
00102 }
00103 
00104 /**
00105   * @brief  External Interrupt PORTA Interrupt routine
00106   * @param  None
00107   * @retval None
00108   */
00109 INTERRUPT_HANDLER(EXTI_PORTA_IRQHandler, 3)
00110 {
00111   /* In order to detect unexpected events during development,
00112      it is recommended to set a breakpoint on the following instruction.
00113   */
00114 }
00115 
00116 /**
00117   * @brief  External Interrupt PORTB Interrupt routine
00118   * @param  None
00119   * @retval None
00120   */
00121 INTERRUPT_HANDLER(EXTI_PORTB_IRQHandler, 4)
00122 {
00123   /* In order to detect unexpected events during development,
00124      it is recommended to set a breakpoint on the following instruction.
00125   */
00126 }
00127 
00128 /**
00129   * @brief  External Interrupt PORTC Interrupt routine
00130   * @param  None
00131   * @retval None
00132   */
00133 INTERRUPT_HANDLER(EXTI_PORTC_IRQHandler, 5)
00134 {
00135   /* In order to detect unexpected events during development,
00136      it is recommended to set a breakpoint on the following instruction.
00137   */
00138 }
00139 
00140 /**
00141   * @brief  External Interrupt PORTD Interrupt routine
00142   * @param  None
00143   * @retval None
00144   */
00145 INTERRUPT_HANDLER(EXTI_PORTD_IRQHandler, 6)
00146 {
00147   /* In order to detect unexpected events during development,
00148      it is recommended to set a breakpoint on the following instruction.
00149   */
00150 }
00151 
00152 /**
00153   * @brief  External Interrupt PORTE Interrupt routine
00154   * @param  None
00155   * @retval None
00156   */
00157 INTERRUPT_HANDLER(EXTI_PORTE_IRQHandler, 7)
00158 {
00159   /* In order to detect unexpected events during development,
00160      it is recommended to set a breakpoint on the following instruction.
00161   */
00162 }
00163 #ifdef STM8S903
00164 /**
00165   * @brief  External Interrupt PORTF Interrupt routine
00166   * @param  None
00167   * @retval None
00168   */
00169  INTERRUPT_HANDLER(EXTI_PORTF_IRQHandler, 8)
00170 {
00171   /* In order to detect unexpected events during development,
00172      it is recommended to set a breakpoint on the following instruction.
00173   */
00174 }
00175 #endif /*STM8S903*/
00176 
00177 #if defined (STM8S208) || defined (STM8AF52Ax)
00178 /**
00179   * @brief CAN RX Interrupt routine.
00180   * @param  None
00181   * @retval None
00182   */
00183  INTERRUPT_HANDLER(CAN_RX_IRQHandler, 8)
00184 {
00185   /* In order to detect unexpected events during development,
00186      it is recommended to set a breakpoint on the following instruction.
00187   */
00188 }
00189 
00190 /**
00191   * @brief  CAN TX Interrupt routine
00192   * @param  None
00193   * @retval None
00194   */
00195  INTERRUPT_HANDLER(CAN_TX_IRQHandler, 9)
00196 {
00197   /* In order to detect unexpected events during development,
00198      it is recommended to set a breakpoint on the following instruction.
00199   */
00200 }
00201 #endif /*STM8S208 || STM8AF52Ax */
00202 
00203 /**
00204   * @brief  SPI Interrupt routine
00205   * @param  None
00206   * @retval None
00207   */
00208 INTERRUPT_HANDLER(SPI_IRQHandler, 10)
00209 {
00210   /* In order to detect unexpected events during development,
00211      it is recommended to set a breakpoint on the following instruction.
00212   */
00213 }
00214 
00215 /**
00216   * @brief  Timer1 Update/Overflow/Trigger/Break Interrupt routine
00217   * @param  None
00218   * @retval None
00219   */
00220 INTERRUPT_HANDLER(TIM1_UPD_OVF_TRG_BRK_IRQHandler, 11)
00221 {
00222   /* In order to detect unexpected events during development,
00223      it is recommended to set a breakpoint on the following instruction.
00224   */
00225 }
00226 
00227 /**
00228   * @brief  Timer1 Capture/Compare Interrupt routine
00229   * @param  None
00230   * @retval None
00231   */
00232 INTERRUPT_HANDLER(TIM1_CAP_COM_IRQHandler, 12)
00233 {
00234   /* In order to detect unexpected events during development,
00235      it is recommended to set a breakpoint on the following instruction.
00236   */
00237 }
00238 
00239 #ifdef STM8S903
00240 /**
00241   * @brief  Timer5 Update/Overflow/Break/Trigger Interrupt routine
00242   * @param  None
00243   * @retval None
00244   */
00245  INTERRUPT_HANDLER(TIM5_UPD_OVF_BRK_TRG_IRQHandler, 13)
00246 {
00247   /* In order to detect unexpected events during development,
00248      it is recommended to set a breakpoint on the following instruction.
00249   */
00250 }
00251 /**
00252   * @brief  Timer5 Capture/Compare Interrupt routine
00253   * @param  None
00254   * @retval None
00255   */
00256  INTERRUPT_HANDLER(TIM5_CAP_COM_IRQHandler, 14)
00257 {
00258   /* In order to detect unexpected events during development,
00259      it is recommended to set a breakpoint on the following instruction.
00260   */
00261 }
00262 
00263 #else /*STM8S208, STM8S207, STM8S105 or STM8S103 or STM8AF62Ax or STM8AF52Ax or STM8AF626x */
00264 /**
00265   * @brief  Timer2 Update/Overflow/Break Interrupt routine
00266   * @param  None
00267   * @retval None
00268   */
00269  INTERRUPT_HANDLER(TIM2_UPD_OVF_BRK_IRQHandler, 13)
00270 {
00271   /* In order to detect unexpected events during development,
00272      it is recommended to set a breakpoint on the following instruction.
00273   */
00274 }
00275 
00276 /**
00277   * @brief  Timer2 Capture/Compare Interrupt routine
00278   * @param  None
00279   * @retval None
00280   */
00281  INTERRUPT_HANDLER(TIM2_CAP_COM_IRQHandler, 14)
00282 {
00283   /* In order to detect unexpected events during development,
00284      it is recommended to set a breakpoint on the following instruction.
00285   */
00286 }
00287 #endif /*STM8S903*/
00288 
00289 #if defined (STM8S208) || defined(STM8S207) || defined(STM8S007) || defined(STM8S105) || \
00290     defined(STM8S005) ||  defined (STM8AF62Ax) || defined (STM8AF52Ax) || defined (STM8AF626x)
00291 /**
00292   * @brief Timer3 Update/Overflow/Break Interrupt routine.
00293   * @param  None
00294   * @retval None
00295   */
00296  INTERRUPT_HANDLER(TIM3_UPD_OVF_BRK_IRQHandler, 15)
00297 {
00298   /* In order to detect unexpected events during development,
00299      it is recommended to set a breakpoint on the following instruction.
00300   */
00301 }
00302 
00303 /**
00304   * @brief  Timer3 Capture/Compare Interrupt routine
00305   * @param  None
00306   * @retval None
00307   */
00308  INTERRUPT_HANDLER(TIM3_CAP_COM_IRQHandler, 16)
00309 {
00310   /* In order to detect unexpected events during development,
00311      it is recommended to set a breakpoint on the following instruction.
00312   */
00313 }
00314 #endif /*STM8S208, STM8S207 or STM8S105 or STM8AF62Ax or STM8AF52Ax or STM8AF626x */
00315 
00316 #if defined (STM8S208) || defined(STM8S207) || defined(STM8S007) || defined(STM8S103) || \
00317     defined(STM8S003) ||  defined (STM8AF62Ax) || defined (STM8AF52Ax) || defined (STM8S903)
00318 /**
00319   * @brief  UART1 TX Interrupt routine
00320   * @param  None
00321   * @retval None
00322   */
00323  INTERRUPT_HANDLER(UART1_TX_IRQHandler, 17)
00324 {
00325   /* In order to detect unexpected events during development,
00326      it is recommended to set a breakpoint on the following instruction.
00327   */
00328 }
00329 
00330 /**
00331   * @brief  UART1 RX Interrupt routine
00332   * @param  None
00333   * @retval None
00334   */
00335  INTERRUPT_HANDLER(UART1_RX_IRQHandler, 18)
00336 {
00337   /* In order to detect unexpected events during development,
00338      it is recommended to set a breakpoint on the following instruction.
00339   */
00340 }
00341 #endif /*STM8S105*/
00342 
00343 /**
00344   * @brief  I2C Interrupt routine
00345   * @param  None
00346   * @retval None
00347   */
00348 INTERRUPT_HANDLER(I2C_IRQHandler, 19)
00349 {
00350   /* In order to detect unexpected events during development,
00351      it is recommended to set a breakpoint on the following instruction.
00352   */
00353 }
00354 
00355 #if defined(STM8S105) || defined(STM8S005) ||  defined (STM8AF626x)
00356 /**
00357   * @brief  UART2 TX interrupt routine.
00358   * @param  None
00359   * @retval None
00360   */
00361  INTERRUPT_HANDLER(UART2_TX_IRQHandler, 20)
00362 {
00363     /* In order to detect unexpected events during development,
00364        it is recommended to set a breakpoint on the following instruction.
00365     */
00366   }
00367 
00368 /**
00369   * @brief  UART2 RX interrupt routine.
00370   * @param  None
00371   * @retval None
00372   */
00373  INTERRUPT_HANDLER(UART2_RX_IRQHandler, 21)
00374 {
00375     /* In order to detect unexpected events during development,
00376        it is recommended to set a breakpoint on the following instruction.
00377     */
00378   }
00379 #endif /* STM8S105*/
00380 
00381 #if defined(STM8S207) || defined(STM8S007) || defined(STM8S208) || defined (STM8AF52Ax) || defined (STM8AF62Ax)
00382 /**
00383   * @brief  UART3 TX interrupt routine.
00384   * @param  None
00385   * @retval None
00386   */
00387  INTERRUPT_HANDLER(UART3_TX_IRQHandler, 20)
00388 {
00389     /* In order to detect unexpected events during development,
00390        it is recommended to set a breakpoint on the following instruction.
00391     */
00392   }
00393 
00394 /**
00395   * @brief  UART3 RX interrupt routine.
00396   * @param  None
00397   * @retval None
00398   */
00399  INTERRUPT_HANDLER(UART3_RX_IRQHandler, 21)
00400 {
00401     /* In order to detect unexpected events during development,
00402        it is recommended to set a breakpoint on the following instruction.
00403     */
00404   }
00405 #endif /*STM8S208 or STM8S207 or STM8AF52Ax or STM8AF62Ax */
00406 
00407 #if defined(STM8S207) || defined(STM8S007) || defined(STM8S208) || defined (STM8AF52Ax) || defined (STM8AF62Ax)
00408 /**
00409   * @brief  ADC2 interrupt routine.
00410   * @param  None
00411   * @retval None
00412   */
00413  INTERRUPT_HANDLER(ADC2_IRQHandler, 22)
00414 {
00415 
00416     /* In order to detect unexpected events during development,
00417        it is recommended to set a breakpoint on the following instruction.
00418     */
00419     return;
00420 
00421 }
00422 #else /*STM8S105, STM8S103 or STM8S903 or STM8AF626x */
00423 /**
00424   * @brief  ADC1 interrupt routine.
00425   * @param  None
00426   * @retval None
00427   */
00428  INTERRUPT_HANDLER(ADC1_IRQHandler, 22)
00429 {
00430 
00431     /* In order to detect unexpected events during development,
00432        it is recommended to set a breakpoint on the following instruction.
00433     */
00434     return;
00435 
00436 }
00437 #endif /*STM8S208 or STM8S207 or STM8AF52Ax or STM8AF62Ax */
00438 
00439 #ifdef STM8S903
00440 /**
00441   * @brief  Timer6 Update/Overflow/Trigger Interrupt routine
00442   * @param  None
00443   * @retval None
00444   */
00445 INTERRUPT_HANDLER(TIM6_UPD_OVF_TRG_IRQHandler, 23)
00446 {
00447   /* In order to detect unexpected events during development,
00448      it is recommended to set a breakpoint on the following instruction.
00449   */
00450 }
00451 #else /*STM8S208, STM8S207, STM8S105 or STM8S103 or STM8AF62Ax or STM8AF52Ax or STM8AF626x */
00452 /**
00453   * @brief  Timer4 Update/Overflow Interrupt routine
00454   * @param  None
00455   * @retval None
00456   */
00457  INTERRUPT_HANDLER(TIM4_UPD_OVF_IRQHandler, 23)
00458 {
00459   /* In order to detect unexpected events during development,
00460      it is recommended to set a breakpoint on the following instruction.
00461   */
00462 }
00463 #endif /*STM8S903*/
00464 
00465 /**
00466   * @brief  Eeprom EEC Interrupt routine
00467   * @param  None
00468   * @retval None
00469   */
00470 INTERRUPT_HANDLER(EEPROM_EEC_IRQHandler, 24)
00471 {
00472   /* In order to detect unexpected events during development,
00473      it is recommended to set a breakpoint on the following instruction.
00474   */
00475 }
00476 
00477 /**
00478   * @}
00479   */
00480 
00481 
00482 /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/