stm8s_tim1.c File Reference

This file contains all the functions for the TIM1 peripheral. More...

#include "stm8s_tim1.h"

Go to the source code of this file.

Functions
static void	TI1_Config (uint8_t TIM1_ICPolarity, uint8_t TIM1_ICSelection, uint8_t TIM1_ICFilter)
	Configure the TI1 as Input.
static void	TI2_Config (uint8_t TIM1_ICPolarity, uint8_t TIM1_ICSelection, uint8_t TIM1_ICFilter)
	Configure the TI2 as Input.
static void	TI3_Config (uint8_t TIM1_ICPolarity, uint8_t TIM1_ICSelection, uint8_t TIM1_ICFilter)
	Configure the TI3 as Input.
static void	TI4_Config (uint8_t TIM1_ICPolarity, uint8_t TIM1_ICSelection, uint8_t TIM1_ICFilter)
	Configure the TI4 as Input.
void	TIM1_ARRPreloadConfig (FunctionalState NewState)
	Enables or disables TIM1 peripheral Preload register on ARR.
void	TIM1_BDTRConfig (TIM1_OSSIState_TypeDef TIM1_OSSIState, TIM1_LockLevel_TypeDef TIM1_LockLevel, uint8_t TIM1_DeadTime, TIM1_BreakState_TypeDef TIM1_Break, TIM1_BreakPolarity_TypeDef TIM1_BreakPolarity, TIM1_AutomaticOutput_TypeDef TIM1_AutomaticOutput)
	Configures the Break feature, dead time, Lock level, the OSSI, and the AOE(automatic output enable).
void	TIM1_CCPreloadControl (FunctionalState NewState)
	Sets or Resets the TIM1 peripheral Capture Compare Preload Control bit.
void	TIM1_CCxCmd (TIM1_Channel_TypeDef TIM1_Channel, FunctionalState NewState)
	Enables or disables the TIM1 Capture Compare Channel x (x=1,..,4).
void	TIM1_CCxNCmd (TIM1_Channel_TypeDef TIM1_Channel, FunctionalState NewState)
	Enables or disables the TIM1 Capture Compare Channel xN (xN=1,..,3).
void	TIM1_ClearFlag (TIM1_FLAG_TypeDef TIM1_FLAG)
	Clears the TIM1�s pending flags.
void	TIM1_ClearITPendingBit (TIM1_IT_TypeDef TIM1_IT)
	Clears the TIM1's interrupt pending bits.
void	TIM1_Cmd (FunctionalState NewState)
	Enables or disables the TIM1 peripheral.
void	TIM1_CounterModeConfig (TIM1_CounterMode_TypeDef TIM1_CounterMode)
	Specifies the TIM1 Counter Mode to be used.
void	TIM1_CtrlPWMOutputs (FunctionalState NewState)
	Enables or disables the TIM1 peripheral Main Outputs.
void	TIM1_DeInit (void)
	Deinitializes the TIM1 peripheral registers to their default reset values.
void	TIM1_EncoderInterfaceConfig (TIM1_EncoderMode_TypeDef TIM1_EncoderMode, TIM1_ICPolarity_TypeDef TIM1_IC1Polarity, TIM1_ICPolarity_TypeDef TIM1_IC2Polarity)
	Configures the TIM1 Encoder Interface.
void	TIM1_ETRClockMode1Config (TIM1_ExtTRGPSC_TypeDef TIM1_ExtTRGPrescaler, TIM1_ExtTRGPolarity_TypeDef TIM1_ExtTRGPolarity, uint8_t ExtTRGFilter)
	Configures the TIM1 External clock Mode1.
void	TIM1_ETRClockMode2Config (TIM1_ExtTRGPSC_TypeDef TIM1_ExtTRGPrescaler, TIM1_ExtTRGPolarity_TypeDef TIM1_ExtTRGPolarity, uint8_t ExtTRGFilter)
	Configures the TIM1 External clock Mode2.
void	TIM1_ETRConfig (TIM1_ExtTRGPSC_TypeDef TIM1_ExtTRGPrescaler, TIM1_ExtTRGPolarity_TypeDef TIM1_ExtTRGPolarity, uint8_t ExtTRGFilter)
	Configures the TIM1 External Trigger.
void	TIM1_ForcedOC1Config (TIM1_ForcedAction_TypeDef TIM1_ForcedAction)
	Forces the TIM1 Channel1 output waveform to active or inactive level.
void	TIM1_ForcedOC2Config (TIM1_ForcedAction_TypeDef TIM1_ForcedAction)
	Forces the TIM1 Channel2 output waveform to active or inactive level.
void	TIM1_ForcedOC3Config (TIM1_ForcedAction_TypeDef TIM1_ForcedAction)
	Forces the TIM1 Channel3 output waveform to active or inactive level.
void	TIM1_ForcedOC4Config (TIM1_ForcedAction_TypeDef TIM1_ForcedAction)
	Forces the TIM1 Channel4 output waveform to active or inactive level.
void	TIM1_GenerateEvent (TIM1_EventSource_TypeDef TIM1_EventSource)
	Configures the TIM1 event to be generated by software.
uint16_t	TIM1_GetCapture1 (void)
	Gets the TIM1 Input Capture 1 value.
uint16_t	TIM1_GetCapture2 (void)
	Gets the TIM1 Input Capture 2 value.
uint16_t	TIM1_GetCapture3 (void)
	Gets the TIM1 Input Capture 3 value.
uint16_t	TIM1_GetCapture4 (void)
	Gets the TIM1 Input Capture 4 value.
uint16_t	TIM1_GetCounter (void)
	Gets the TIM1 Counter value.
FlagStatus	TIM1_GetFlagStatus (TIM1_FLAG_TypeDef TIM1_FLAG)
	Checks whether the specified TIM1 flag is set or not.
ITStatus	TIM1_GetITStatus (TIM1_IT_TypeDef TIM1_IT)
	Checks whether the TIM1 interrupt has occurred or not.
uint16_t	TIM1_GetPrescaler (void)
	Gets the TIM1 Prescaler value.
void	TIM1_ICInit (TIM1_Channel_TypeDef TIM1_Channel, TIM1_ICPolarity_TypeDef TIM1_ICPolarity, TIM1_ICSelection_TypeDef TIM1_ICSelection, TIM1_ICPSC_TypeDef TIM1_ICPrescaler, uint8_t TIM1_ICFilter)
	Initializes the TIM1 peripheral according to the specified parameters.
void	TIM1_InternalClockConfig (void)
	Configures the TIM1 internal Clock.
void	TIM1_ITConfig (TIM1_IT_TypeDef TIM1_IT, FunctionalState NewState)
	Enables or disables the specified TIM1 interrupts.
void	TIM1_OC1FastConfig (FunctionalState NewState)
	Configures the TIM1 Capture Compare 1 Fast feature.
void	TIM1_OC1Init (TIM1_OCMode_TypeDef TIM1_OCMode, TIM1_OutputState_TypeDef TIM1_OutputState, TIM1_OutputNState_TypeDef TIM1_OutputNState, uint16_t TIM1_Pulse, TIM1_OCPolarity_TypeDef TIM1_OCPolarity, TIM1_OCNPolarity_TypeDef TIM1_OCNPolarity, TIM1_OCIdleState_TypeDef TIM1_OCIdleState, TIM1_OCNIdleState_TypeDef TIM1_OCNIdleState)
	Initializes the TIM1 Channel1 according to the specified parameters.
void	TIM1_OC1NPolarityConfig (TIM1_OCNPolarity_TypeDef TIM1_OCNPolarity)
	Configures the TIM1 Channel 1N polarity.
void	TIM1_OC1PolarityConfig (TIM1_OCPolarity_TypeDef TIM1_OCPolarity)
	Configures the TIM1 Channel 1 polarity.
void	TIM1_OC1PreloadConfig (FunctionalState NewState)
	Enables or disables the TIM1 peripheral Preload Register on CCR1.
void	TIM1_OC2FastConfig (FunctionalState NewState)
	Configures the TIM1 Capture Compare 2 Fast feature.
void	TIM1_OC2Init (TIM1_OCMode_TypeDef TIM1_OCMode, TIM1_OutputState_TypeDef TIM1_OutputState, TIM1_OutputNState_TypeDef TIM1_OutputNState, uint16_t TIM1_Pulse, TIM1_OCPolarity_TypeDef TIM1_OCPolarity, TIM1_OCNPolarity_TypeDef TIM1_OCNPolarity, TIM1_OCIdleState_TypeDef TIM1_OCIdleState, TIM1_OCNIdleState_TypeDef TIM1_OCNIdleState)
	Initializes the TIM1 Channel2 according to the specified parameters.
void	TIM1_OC2NPolarityConfig (TIM1_OCNPolarity_TypeDef TIM1_OCNPolarity)
	Configures the TIM1 Channel 2N polarity.
void	TIM1_OC2PolarityConfig (TIM1_OCPolarity_TypeDef TIM1_OCPolarity)
	Configures the TIM1 Channel 2 polarity.
void	TIM1_OC2PreloadConfig (FunctionalState NewState)
	Enables or disables the TIM1 peripheral Preload Register on CCR2.
void	TIM1_OC3FastConfig (FunctionalState NewState)
	Configures the TIM1 Capture Compare 3 Fast feature.
void	TIM1_OC3Init (TIM1_OCMode_TypeDef TIM1_OCMode, TIM1_OutputState_TypeDef TIM1_OutputState, TIM1_OutputNState_TypeDef TIM1_OutputNState, uint16_t TIM1_Pulse, TIM1_OCPolarity_TypeDef TIM1_OCPolarity, TIM1_OCNPolarity_TypeDef TIM1_OCNPolarity, TIM1_OCIdleState_TypeDef TIM1_OCIdleState, TIM1_OCNIdleState_TypeDef TIM1_OCNIdleState)
	Initializes the TIM1 Channel3 according to the specified parameters.
void	TIM1_OC3NPolarityConfig (TIM1_OCNPolarity_TypeDef TIM1_OCNPolarity)
	Configures the TIM1 Channel 3N polarity.
void	TIM1_OC3PolarityConfig (TIM1_OCPolarity_TypeDef TIM1_OCPolarity)
	Configures the TIM1 Channel 3 polarity.
void	TIM1_OC3PreloadConfig (FunctionalState NewState)
	Enables or disables the TIM1 peripheral Preload Register on CCR3.
void	TIM1_OC4FastConfig (FunctionalState NewState)
	Configures the TIM1 Capture Compare 4 Fast feature.
void	TIM1_OC4Init (TIM1_OCMode_TypeDef TIM1_OCMode, TIM1_OutputState_TypeDef TIM1_OutputState, uint16_t TIM1_Pulse, TIM1_OCPolarity_TypeDef TIM1_OCPolarity, TIM1_OCIdleState_TypeDef TIM1_OCIdleState)
	Initializes the TIM1 Channel4 according to the specified parameters.
void	TIM1_OC4PolarityConfig (TIM1_OCPolarity_TypeDef TIM1_OCPolarity)
	Configures the TIM1 Channel 4 polarity.
void	TIM1_OC4PreloadConfig (FunctionalState NewState)
	Enables or disables the TIM1 peripheral Preload Register on CCR4.
void	TIM1_PrescalerConfig (uint16_t Prescaler, TIM1_PSCReloadMode_TypeDef TIM1_PSCReloadMode)
	Configures the TIM1 Prescaler.
void	TIM1_PWMIConfig (TIM1_Channel_TypeDef TIM1_Channel, TIM1_ICPolarity_TypeDef TIM1_ICPolarity, TIM1_ICSelection_TypeDef TIM1_ICSelection, TIM1_ICPSC_TypeDef TIM1_ICPrescaler, uint8_t TIM1_ICFilter)
	Configures the TIM1 peripheral in PWM Input Mode according to the specified parameters.
void	TIM1_SelectCOM (FunctionalState NewState)
	Selects the TIM1 peripheral Commutation event.
void	TIM1_SelectHallSensor (FunctionalState NewState)
	Enables or Disables the TIM1�s Hall sensor interface.
void	TIM1_SelectInputTrigger (TIM1_TS_TypeDef TIM1_InputTriggerSource)
	Selects the TIM1 Input Trigger source.
void	TIM1_SelectMasterSlaveMode (FunctionalState NewState)
	Sets or Resets the TIM1 Master/Slave Mode.
void	TIM1_SelectOCxM (TIM1_Channel_TypeDef TIM1_Channel, TIM1_OCMode_TypeDef TIM1_OCMode)
	Selects the TIM1 Output Compare Mode.
void	TIM1_SelectOnePulseMode (TIM1_OPMode_TypeDef TIM1_OPMode)
	Selects the TIM1�s One Pulse Mode.
void	TIM1_SelectOutputTrigger (TIM1_TRGOSource_TypeDef TIM1_TRGOSource)
	Selects the TIM1 Trigger Output Mode.
void	TIM1_SelectSlaveMode (TIM1_SlaveMode_TypeDef TIM1_SlaveMode)
	Selects the TIM1 Slave Mode.
void	TIM1_SetAutoreload (uint16_t Autoreload)
	Sets the TIM1 Autoreload Register value.
void	TIM1_SetCompare1 (uint16_t Compare1)
	Sets the TIM1 Capture Compare1 Register value.
void	TIM1_SetCompare2 (uint16_t Compare2)
	Sets the TIM1 Capture Compare2 Register value.
void	TIM1_SetCompare3 (uint16_t Compare3)
	Sets the TIM1 Capture Compare3 Register value.
void	TIM1_SetCompare4 (uint16_t Compare4)
	Sets the TIM1 Capture Compare4 Register value.
void	TIM1_SetCounter (uint16_t Counter)
	Sets the TIM1 Counter Register value.
void	TIM1_SetIC1Prescaler (TIM1_ICPSC_TypeDef TIM1_IC1Prescaler)
	Sets the TIM1 Input Capture 1 prescaler.
void	TIM1_SetIC2Prescaler (TIM1_ICPSC_TypeDef TIM1_IC2Prescaler)
	Sets the TIM1 Input Capture 2 prescaler.
void	TIM1_SetIC3Prescaler (TIM1_ICPSC_TypeDef TIM1_IC3Prescaler)
	Sets the TIM1 Input Capture 3 prescaler.
void	TIM1_SetIC4Prescaler (TIM1_ICPSC_TypeDef TIM1_IC4Prescaler)
	Sets the TIM1 Input Capture 4 prescaler.
void	TIM1_TimeBaseInit (uint16_t TIM1_Prescaler, TIM1_CounterMode_TypeDef TIM1_CounterMode, uint16_t TIM1_Period, uint8_t TIM1_RepetitionCounter)
	Initializes the TIM1 Time Base Unit according to the specified parameters.
void	TIM1_TIxExternalClockConfig (TIM1_TIxExternalCLK1Source_TypeDef TIM1_TIxExternalCLKSource, TIM1_ICPolarity_TypeDef TIM1_ICPolarity, uint8_t ICFilter)
	Configures the TIM1 Trigger as External Clock.
void	TIM1_UpdateDisableConfig (FunctionalState NewState)
	Enables or Disables the TIM1 Update event.
void	TIM1_UpdateRequestConfig (TIM1_UpdateSource_TypeDef TIM1_UpdateSource)
	Selects the TIM1 Update Request Interrupt source.

---

Detailed Description

This file contains all the functions for the TIM1 peripheral.

Author:

MCD Application Team

Version:

V2.3.0

Date:

16-June-2017

Attention:

© COPYRIGHT 2014 STMicroelectronics

Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); You may not use this file except in compliance with the License. You may obtain a copy of the License at:

http://www.st.com/software_license_agreement_liberty_v2

Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License.

Definition in file stm8s_tim1.c.