stm8s_exti.h File Reference

This file contains all functions prototype and macros for the EXTI peripheral. More...

#include "stm8s.h"

Go to the source code of this file.

Defines
#define	IS_EXTI_PINMASK_OK(PinMask)   ((((PinMask) & (uint8_t)0x00) == (uint8_t)0x00) && ((PinMask) != (uint8_t)0x00))
	Macro used by the assert function in order to check the different values of the EXTI PinMask.
#define	IS_EXTI_PORT_OK(PORT)
	Macro used by the assert function in order to check the different Port values.
#define	IS_EXTI_SENSITIVITY_OK(SensitivityValue)
	Macro used by the assert function in order to check the different sensitivity values for PORTA to PORTE.
#define	IS_EXTI_TLISENSITIVITY_OK(SensitivityValue)
	Macro used by the assert function in order to check the different sensitivity values for TLI.
Enumerations
enum	EXTI_Port_TypeDef {   EXTI_PORT_GPIOA = (uint8_t)0x00, EXTI_PORT_GPIOB = (uint8_t)0x01, EXTI_PORT_GPIOC = (uint8_t)0x02, EXTI_PORT_GPIOD = (uint8_t)0x03,   EXTI_PORT_GPIOE = (uint8_t)0x04 }
	EXTI PortNum possible values. More...
enum	EXTI_Sensitivity_TypeDef { EXTI_SENSITIVITY_FALL_LOW = (uint8_t)0x00, EXTI_SENSITIVITY_RISE_ONLY = (uint8_t)0x01, EXTI_SENSITIVITY_FALL_ONLY = (uint8_t)0x02, EXTI_SENSITIVITY_RISE_FALL = (uint8_t)0x03 }
	EXTI Sensitivity values for PORTA to PORTE. More...
enum	EXTI_TLISensitivity_TypeDef { EXTI_TLISENSITIVITY_FALL_ONLY = (uint8_t)0x00, EXTI_TLISENSITIVITY_RISE_ONLY = (uint8_t)0x04 }
	EXTI Sensitivity values for TLI. More...
Functions
void	EXTI_DeInit (void)
	Deinitializes the external interrupt control registers to their default reset value.
EXTI_Sensitivity_TypeDef	EXTI_GetExtIntSensitivity (EXTI_Port_TypeDef Port)
	Get the external interrupt sensitivity of the selected port.
EXTI_TLISensitivity_TypeDef	EXTI_GetTLISensitivity (void)
	Get the TLI interrupt sensitivity.
void	EXTI_SetExtIntSensitivity (EXTI_Port_TypeDef Port, EXTI_Sensitivity_TypeDef SensitivityValue)
	Set the external interrupt sensitivity of the selected port.
void	EXTI_SetTLISensitivity (EXTI_TLISensitivity_TypeDef SensitivityValue)
	Set the TLI interrupt sensitivity.

---

Detailed Description

This file contains all functions prototype and macros for the EXTI peripheral.

Author:

MCD Application Team

Version:

V2.3.0

Date:

16-June-2017

Attention:

© COPYRIGHT 2014 STMicroelectronics

Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); You may not use this file except in compliance with the License. You may obtain a copy of the License at:

http://www.st.com/software_license_agreement_liberty_v2

Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License.

Definition in file stm8s_exti.h.