niRFSA Configure PXI Chassis Clk10

NI RF Vector Signal Analyzers

previous page next page

niRFSA Configure PXI Chassis Clk10

Specifies the signal to drive the 10 MHz reference clock on the PXI backplane. This option can only be configured when the NI PXI-5600 is in Slot 2 of the PXI chassis.

instrument handle identifies your instrument session. instrument handle is obtained from the niRFSA Initialize or the niRFSA Initialize With Options VIs and identifies a particular instrument session.

PXI Clk10 source specifies the signal to drive the 10 MHz reference clock on the PXI backplane. This option can only be configured when the NI PXI-5600 is in Slot 2 of the PXI chassis.

None	The device does not drive the PXI 10 MHz backplane reference clock.
OnboardClock	The device drives the PXI 10 MHz backplane reference clock with the NI PXI-5600 onboard clock. You must connect the 10 MHz OUT connector to the PXI 10 MHz I/O on the NI PXI 5600 front panel to use this option.
RefIn	The device drives the PXI 10 MHz backplane reference clock with the reference source attached to the NI PXI-5600 REF IN connector. You must connect the 10 MHz OUT connector to the PXI 10 MHz I/O on the NI PXI 5600 front panel to use this option.

error in (no error) describes error conditions that occur before this VI runs.

	status is TRUE (X) if an error occurred before this VI ran or FALSE (checkmark) to indicate a warning or that no error occurred before this VI ran. The default is FALSE.
	code is the error or warning code. The default is 0. If status is TRUE, code is a negative error code. If status is FALSE, code is 0 or a warning code.
	source describes the origin of the error or warning and is, in most cases, the name of the VI that produced the error or warning. The default is an empty string.

instrument handle out passes a reference to your instrument session to the next VI. instrument handle is obtained from the niRFSA Initialize or the niRFSA Initialize With Options VIs and identifies a particular instrument session.

error out contains error information. If error in indicates that an error occurred before this VI ran, error out contains the same error information. Otherwise, it describes the error status that this VI produces.

	status is TRUE (X) if an error occurred or FALSE (checkmark) to indicate a warning or that no error occurred.
	code the error or warning code. If status is TRUE, code is a non-zero error code. If status is FALSE, code is 0 or a warning code.
	source describes the origin of the error or warning and is, in most cases, the name of the VI that produced the error or warning.

previous page start next page