niRFSA_ConfigurePXIChassisClk10
ViStatus = niRFSA_ConfigurePXIChassisClk10( ViSession vi, ViConstString pxiClk10Source);
Purpose
Specifies the signal to drive the 10 MHz reference clock on the PXI backplane. This option can only be configured when the NI PXI-5600 is in Slot 2 of the PXI chassis.
Parameters
| Input | ||
| Name | Type | Description |
| vi | ViSession | Identifies your instrument session. vi is obtained from the niRFSA_init or the niRFSA_initWithOptions functions and identifies a particular instrument session. |
| PXIClk10Source | ViConstString | Specifies the signal to drive the 10 MHz reference clock on the PXI backplane. This option can only be configured when the NI PXI-5600 is in Slot 2 of the PXI chassis. |
Return Value
| Name | Type | Description | ||
| status | ViStatus | Returns the status code of this operation. The status code either indicates success or describes an error or warning condition. You examine the status code from each call to an instrument driver function to determine if an error occurred. To obtain a text description of the status code, call the niRFSA_error_message function. To obtain additional information about the error condition, call the niRFSA_GetError function. To clear the error information from the driver, call the niRFSA_ClearError function. The general meaning of the status code is as follows:
|
Meaning | |
|---|---|---|---|---|
| 0 | Success | |||
| Positive Values | Warnings | |||
| Negative Values | Errors |