NIRFSA_ATTR_PXI_CHASSIS_CLK10_SOURCE
Specific Attribute
| Data type |
Access | High Level Functions |
|---|---|---|
| ViString | R/W | niRFSA_ConfigurePXIChassisClk10 |
Description
Specifies the signal to drive the 10 MHz reference clock on the PXI backplane. This option can only be configured when the NI PXI-5600 is in Slot 2 of the PXI chassis.
Defined Values:
| NIRFSA_VAL_NONE_STR ("None") | The device does not drive the PXI 10 MHz backplane reference clock. |
| NIRFSA_VAL_ONBOARD_CLOCK_STR ("OnboardClock") | The device drives the PXI 10 MHz backplane reference clock with the NI PXI-5600 onboard clock. You must connect the 10 MHz OUT connector to the PXI 10 MHz I/O on the NI PXI 5600 front panel to use this option. |
| NIRFSA_VAL_REF_IN_STR ("RefIn") | The device drives the PXI 10 MHz backplane reference clock with the reference source attached to the NI PXI-5600 REF IN connector. You must connect the 10 MHz OUT connector to the PXI 10 MHz I/O on the NI PXI 5600 front panel to use this option. |