Clocking:PXI Chassis Clk10 Source
Short Name: PXIChassisClk10Src
Specifies the signal to drive the 10 MHz reference clock on the PXI backplane. This option can only be configured when the NI PXI-5600 is in Slot 2 of the PXI chassis.
| None | The device does not drive the PXI 10 MHz backplane reference clock. |
| OnboardClock | The device drives the PXI 10 MHz backplane reference clock with the NI PXI-5600 onboard clock. You must connect the 10 MHz OUT connector to the PXI 10 MHz I/O on the NI PXI 5600 front panel to use this option. |
| RefIn | The device drives the PXI 10 MHz backplane reference clock with the reference source attached to the NI PXI-5600 REF IN connector. You must connect the 10 MHz OUT connector to the PXI 10 MHz I/O on the NI PXI 5600 front panel to use this option. |
Remarks
The following table lists the characteristics of this property.
| Data Type | ViString |
| Permissions | R/W |
| High-Level VI | niRFSA Configure PXI Chassis Clk10 |