Socket APIs: Socket register

Wiznet Socket API

Socket register

Socket register group
Socket register configures and control SOCKETn which is necessary to data communication. More...

Macros

#define Sn_MR(sn)   (_W5200_IO_BASE_ + WIZCHIP_SREG_BLOCK(sn) + (0x0000))
 socket Mode register(R/W) More...
 
#define Sn_CR(sn)   (_W5200_IO_BASE_ + WIZCHIP_SREG_BLOCK(sn) + (0x0001))
 Socket command register(R/W) More...
 
#define Sn_IR(sn)   (_W5200_IO_BASE_ + WIZCHIP_SREG_BLOCK(sn) + (0x0002))
 Socket interrupt register(R) More...
 
#define Sn_SR(sn)   (_W5200_IO_BASE_ + WIZCHIP_SREG_BLOCK(sn) + (0x0003))
 Socket status register(R) More...
 
#define Sn_PORT(sn)   (_W5200_IO_BASE_ + WIZCHIP_SREG_BLOCK(sn) + (0x0004))
 source port register(R/W) More...
 
#define Sn_DHAR(sn)   (_W5200_IO_BASE_ + WIZCHIP_SREG_BLOCK(sn) + (0x0006))
 Peer MAC register address(R/W) More...
 
#define Sn_DIPR(sn)   (_W5200_IO_BASE_ + WIZCHIP_SREG_BLOCK(sn) + (0x000C))
 Peer IP register address(R/W) More...
 
#define Sn_DPORT(sn)   (_W5200_IO_BASE_ + WIZCHIP_SREG_BLOCK(sn) + (0x0010))
 Peer port register address(R/W) More...
 
#define Sn_MSSR(sn)   (_W5200_IO_BASE_ + WIZCHIP_SREG_BLOCK(sn) + (0x0012))
 Maximum Segment Size(Sn_MSSR0) register address(R/W) More...
 
#define Sn_PROTO(sn)   (_W5200_IO_BASE_ + WIZCHIP_SREG_BLOCK(sn) + (0x0014))
 IP Protocol(PROTO) Register(R/W) More...
 
#define Sn_TOS(sn)   (WIZCHIP_SREG_BLOCK(sn) + 0x0015)
 IP Type of Service(TOS) Register(R/W) More...
 
#define Sn_TTL(sn)   (_W5200_IO_BASE_ + WIZCHIP_SREG_BLOCK(sn) + (0x0016))
 IP Time to live(TTL) Register(R/W) More...
 
#define Sn_RXMEM_SIZE(sn)   (_W5200_IO_BASE_ + WIZCHIP_SREG_BLOCK(sn) + (0x001E))
 Receive memory size register(R/W) More...
 
#define Sn_TXMEM_SIZE(sn)   (_W5200_IO_BASE_ + WIZCHIP_SREG_BLOCK(sn) + (0x001F))
 Transmit memory size register(R/W) More...
 
#define Sn_TX_FSR(sn)   (_W5200_IO_BASE_ + WIZCHIP_SREG_BLOCK(sn) + (0x0020))
 Transmit free memory size register(R) More...
 
#define Sn_TX_RD(sn)   (_W5200_IO_BASE_ + WIZCHIP_SREG_BLOCK(sn) + (0x0022))
 Transmit memory read pointer register address(R) More...
 
#define Sn_TX_WR(sn)   (_W5200_IO_BASE_ + WIZCHIP_SREG_BLOCK(sn) + (0x0024))
 Transmit memory write pointer register address(R/W) More...
 
#define Sn_RX_RSR(sn)   (_W5200_IO_BASE_ + WIZCHIP_SREG_BLOCK(sn) + (0x0026))
 Received data size register(R) More...
 
#define Sn_RX_RD(sn)   (_W5200_IO_BASE_ + WIZCHIP_SREG_BLOCK(sn) + (0x0028))
 Read point of Receive memory(R/W) More...
 
#define Sn_RX_WR(sn)   (_W5200_IO_BASE_ + WIZCHIP_SREG_BLOCK(sn) + (0x002A))
 Write point of Receive memory(R) More...
 
#define Sn_IMR(sn)   (_W5200_IO_BASE_ + WIZCHIP_SREG_BLOCK(sn) + (0x002C))
 socket interrupt mask register(R) More...
 
#define Sn_FRAG(sn)   (_W5200_IO_BASE_ + WIZCHIP_SREG_BLOCK(sn) + (0x002D))
 Fragment field value in IP header register(R/W) More...
 

Detailed Description

Socket register group
Socket register configures and control SOCKETn which is necessary to data communication.

See also
Sn_MR, Sn_CR, Sn_IR, Sn_IMR : SOCKETn Control
Sn_SR, Sn_PORT, Sn_DHAR, Sn_DIPR, Sn_DPORT : SOCKETn Information
Sn_MSSR, Sn_TOS, Sn_TTL, Sn_FRAG : Internet protocol.
Sn_RXMEM_SIZE, Sn_TXMEM_SIZE, Sn_TX_FSR, Sn_TX_RD, Sn_TX_WR, Sn_RX_RSR, Sn_RX_RD, Sn_RX_WR : Data communication

Macro Definition Documentation

#define Sn_MR (   sn)    (_W5200_IO_BASE_ + WIZCHIP_SREG_BLOCK(sn) + (0x0000))

socket Mode register(R/W)

Sn_MR configures the option or protocol type of Socket n.

Each bit of Sn_MR defined as the following.

7 6 5 4 3 2 1 0
MULTI MF ND/MC Reserved Protocol[3] Protocol[2] Protocol[1] Protocol[0]
  • Sn_MR_MULTI : Support UDP Multicasting
  • Sn_MR_MF : Support MACRAW
  • Sn_MR_ND : No Delayed Ack(TCP) flag
  • Sn_MR_MC : IGMP version used in UDP mulitcasting
  • Protocol
    Protocol[3] Protocol[2] Protocol[1] Protocol[0] Meaning
    0 0 0 0 Closed
    0 0 0 1 TCP
    0 0 1 0 UDP
    0 1 0 0 MACRAW
  • In case of Socket 0
    Protocol[3] Protocol[2] Protocol[1] Protocol[0] Meaning
    0 1 0 0 MACRAW
    0 1 0 1 PPPoE

Definition at line 429 of file w5200.h.

#define Sn_CR (   sn)    (_W5200_IO_BASE_ + WIZCHIP_SREG_BLOCK(sn) + (0x0001))

Socket command register(R/W)

This is used to set the command for Socket n such as OPEN, CLOSE, CONNECT, LISTEN, SEND, and RECEIVE.
After W5200 accepts the command, the Sn_CR register is automatically cleared to 0x00. Even though Sn_CR is cleared to 0x00, the command is still being processed.
To check whether the command is completed or not, please check the Sn_IR or Sn_SR.

  • Sn_CR_OPEN : Initialize or open socket.
  • Sn_CR_LISTEN : Wait connection request in TCP mode(Server mode)
  • Sn_CR_CONNECT : Send connection request in TCP mode(Client mode)
  • Sn_CR_DISCON : Send closing request in TCP mode.
  • Sn_CR_CLOSE : Close socket.
  • Sn_CR_SEND : Update TX buffer pointer and send data.
  • Sn_CR_SEND_MAC : Send data with MAC address, so without ARP process.
  • Sn_CR_SEND_KEEP : Send keep alive message.
  • Sn_CR_RECV : Update RX buffer pointer and receive data.
  • In case of S0_MR(P3:P0) = S0_MR_PPPoE
    Value Symbol Description
    0x23 PCON PPPoE connection begins by transmitting PPPoE discovery packet
    0x24 PDISCON Closes PPPoE connection
    0x25 PCR In each phase, it transmits REQ message.
    0x26 PCN In each phase, it transmits NAK message.
    0x27 PCJ In each phase, it transmits REJECT message.

Definition at line 457 of file w5200.h.

#define Sn_IR (   sn)    (_W5200_IO_BASE_ + WIZCHIP_SREG_BLOCK(sn) + (0x0002))

Socket interrupt register(R)

Sn_IR indicates the status of Socket Interrupt such as establishment, termination, receiving data, timeout).
When an interrupt occurs and the corresponding bit of Sn_IMR is the corresponding bit of Sn_IR becomes
In order to clear the Sn_IR bit, the host should write the bit to

7 6 5 4 3 2 1 0
PRECV PFAIL PNEXT SEND_OK TIMEOUT RECV DISCON CON

Definition at line 478 of file w5200.h.

#define Sn_SR (   sn)    (_W5200_IO_BASE_ + WIZCHIP_SREG_BLOCK(sn) + (0x0003))

Socket status register(R)

Sn_SR indicates the status of Socket n.
The status of Socket n is changed by Sn_CR or some special control packet as SYN, FIN packet in TCP.

Normal status
Temporary status during changing the status of Socket n.

Definition at line 501 of file w5200.h.

#define Sn_PORT (   sn)    (_W5200_IO_BASE_ + WIZCHIP_SREG_BLOCK(sn) + (0x0004))

source port register(R/W)

Sn_PORT configures the source port number of Socket n. It is valid when Socket n is used in TCP/UDP mode. It should be set before OPEN command is ordered.

Definition at line 509 of file w5200.h.

#define Sn_DHAR (   sn)    (_W5200_IO_BASE_ + WIZCHIP_SREG_BLOCK(sn) + (0x0006))

Peer MAC register address(R/W)

Sn_DHAR configures the destination hardware address of Socket n when using SEND_MAC command in UDP mode or it indicates that it is acquired in ARP-process by CONNECT/SEND command.

Definition at line 517 of file w5200.h.

#define Sn_DIPR (   sn)    (_W5200_IO_BASE_ + WIZCHIP_SREG_BLOCK(sn) + (0x000C))

Peer IP register address(R/W)

Sn_DIPR configures or indicates the destination IP address of Socket n. It is valid when Socket n is used in TCP/UDP mode. In TCP client mode, it configures an IP address of TCP server before CONNECT command. In TCP server mode, it indicates an IP address of TCP client after successfully establishing connection. In UDP mode, it configures an IP address of peer to be received the UDP packet by SEND or SEND_MAC command.

Definition at line 527 of file w5200.h.

#define Sn_DPORT (   sn)    (_W5200_IO_BASE_ + WIZCHIP_SREG_BLOCK(sn) + (0x0010))

Peer port register address(R/W)

Sn_DPORT configures or indicates the destination port number of Socket n. It is valid when Socket n is used in TCP/UDP mode. In TCP clientmode, it configures the listen port number of TCP server before CONNECT command. In TCP Servermode, it indicates the port number of TCP client after successfully establishing connection. In UDP mode, it configures the port number of peer to be transmitted the UDP packet by SEND/SEND_MAC command.

Definition at line 537 of file w5200.h.

#define Sn_MSSR (   sn)    (_W5200_IO_BASE_ + WIZCHIP_SREG_BLOCK(sn) + (0x0012))

Maximum Segment Size(Sn_MSSR0) register address(R/W)

Sn_MSSR configures or indicates the MTU(Maximum Transfer Unit) of Socket n.

Definition at line 544 of file w5200.h.

#define Sn_PROTO (   sn)    (_W5200_IO_BASE_ + WIZCHIP_SREG_BLOCK(sn) + (0x0014))

IP Protocol(PROTO) Register(R/W)

Sn_PROTO that sets the protocol number field of the IP header at the IP layer. It is valid only in IPRAW mode, and ignored in other modes.

Definition at line 552 of file w5200.h.

#define Sn_TOS (   sn)    (WIZCHIP_SREG_BLOCK(sn) + 0x0015)

IP Type of Service(TOS) Register(R/W)

Sn_TOS configures the TOS(Type Of Service field in IP Header) of Socket n. It is set before OPEN command.

Definition at line 560 of file w5200.h.

#define Sn_TTL (   sn)    (_W5200_IO_BASE_ + WIZCHIP_SREG_BLOCK(sn) + (0x0016))

IP Time to live(TTL) Register(R/W)

Sn_TTL configures the TTL(Time To Live field in IP header) of Socket n. It is set before OPEN command.

Definition at line 568 of file w5200.h.

#define Sn_RXMEM_SIZE (   sn)    (_W5200_IO_BASE_ + WIZCHIP_SREG_BLOCK(sn) + (0x001E))

Receive memory size register(R/W)

Sn_RXMEM_SIZE configures the RX buffer block size of Socket n. Socket n RX Buffer Block size can be configured with 1,2,4,8, and 16 Kbytes. If a different size is configured, the data cannot be normally received from a peer. Although Socket n RX Buffer Block size is initially configured to 2Kbytes, user can re-configure its size using Sn_RXMEM_SIZE. The total sum of Sn_RXMEM_SIZE can not be exceed 16Kbytes. When exceeded, the data reception error is occurred.

Definition at line 588 of file w5200.h.

#define Sn_TXMEM_SIZE (   sn)    (_W5200_IO_BASE_ + WIZCHIP_SREG_BLOCK(sn) + (0x001F))

Transmit memory size register(R/W)

Sn_TXMEM_SIZE configures the TX buffer block size of Socket n. Socket n TX Buffer Block size can be configured with 1,2,4,8, and 16 Kbytes. If a different size is configured, the data can't be normally transmitted to a peer. Although Socket n TX Buffer Block size is initially configured to 2Kbytes, user can be re-configure its size using Sn_TXMEM_SIZE. The total sum of Sn_TXMEM_SIZE can not be exceed 16Kbytes. When exceeded, the data transmission error is occurred.

Definition at line 599 of file w5200.h.

#define Sn_TX_FSR (   sn)    (_W5200_IO_BASE_ + WIZCHIP_SREG_BLOCK(sn) + (0x0020))

Transmit free memory size register(R)

Sn_TX_FSR indicates the free size of Socket n TX Buffer Block. It is initialized to the configured size by Sn_TXMEM_SIZE. Data bigger than Sn_TX_FSR should not be saved in the Socket n TX Buffer because the bigger data overwrites the previous saved data not yet sent. Therefore, check before saving the data to the Socket n TX Buffer, and if data is equal or smaller than its checked size, transmit the data with SEND/SEND_MAC command after saving the data in Socket n TX buffer. But, if data is bigger than its checked size, transmit the data after dividing into the checked size and saving in the Socket n TX buffer.

Definition at line 610 of file w5200.h.

#define Sn_TX_RD (   sn)    (_W5200_IO_BASE_ + WIZCHIP_SREG_BLOCK(sn) + (0x0022))

Transmit memory read pointer register address(R)

Sn_TX_RD is initialized by OPEN command. However, if Sn_MR(P[3:0]) is TCP mode(001), it is re-initialized while connecting with TCP. After its initialization, it is auto-increased by SEND command. SEND command transmits the saved data from the current Sn_TX_RD to the Sn_TX_WR in the Socket n TX Buffer. After transmitting the saved data, the SEND command increases the Sn_TX_RD as same as the Sn_TX_WR. If its increment value exceeds the maximum value 0xFFFF, (greater than 0x10000 and the carry bit occurs), then the carry bit is ignored and will automatically update with the lower 16bits value.

Definition at line 622 of file w5200.h.

#define Sn_TX_WR (   sn)    (_W5200_IO_BASE_ + WIZCHIP_SREG_BLOCK(sn) + (0x0024))

Transmit memory write pointer register address(R/W)

Sn_TX_WR is initialized by OPEN command. However, if Sn_MR(P[3:0]) is TCP mode(001), it is re-initialized while connecting with TCP.
It should be read or be updated like as follows.

  1. Read the starting address for saving the transmitting data.
  2. Save the transmitting data from the starting address of Socket n TX buffer.
  3. After saving the transmitting data, update Sn_TX_WR to the increased value as many as transmitting data size. If the increment value exceeds the maximum value 0xFFFF(greater than 0x10000 and the carry bit occurs), then the carry bit is ignored and will automatically update with the lower 16bits value.
  4. Transmit the saved data in Socket n TX Buffer by using SEND/SEND command

Definition at line 636 of file w5200.h.

#define Sn_RX_RSR (   sn)    (_W5200_IO_BASE_ + WIZCHIP_SREG_BLOCK(sn) + (0x0026))

Received data size register(R)

Sn_RX_RSR indicates the data size received and saved in Socket n RX Buffer. Sn_RX_RSR does not exceed the Sn_RXMEM_SIZE and is calculated as the difference between Socket n RX Write Pointer (Sn_RX_WR)and Socket n RX Read Pointer (Sn_RX_RD)

Definition at line 645 of file w5200.h.

#define Sn_RX_RD (   sn)    (_W5200_IO_BASE_ + WIZCHIP_SREG_BLOCK(sn) + (0x0028))

Read point of Receive memory(R/W)

Sn_RX_RD is initialized by OPEN command. Make sure to be read or updated as follows.

  1. Read the starting save address of the received data.
  2. Read data from the starting address of Socket n RX Buffer.
  3. After reading the received data, Update Sn_RX_RD to the increased value as many as the reading size. If the increment value exceeds the maximum value 0xFFFF, that is, is greater than 0x10000 and the carry bit occurs, update with the lower 16bits value ignored the carry bit.
  4. Order RECV command is for notifying the updated Sn_RX_RD to W5200.

Definition at line 658 of file w5200.h.

#define Sn_RX_WR (   sn)    (_W5200_IO_BASE_ + WIZCHIP_SREG_BLOCK(sn) + (0x002A))

Write point of Receive memory(R)

Sn_RX_WR is initialized by OPEN command and it is auto-increased by the data reception. If the increased value exceeds the maximum value 0xFFFF, (greater than 0x10000 and the carry bit occurs), then the carry bit is ignored and will automatically update with the lower 16bits value.

Definition at line 667 of file w5200.h.

#define Sn_IMR (   sn)    (_W5200_IO_BASE_ + WIZCHIP_SREG_BLOCK(sn) + (0x002C))

socket interrupt mask register(R)

Sn_IMR masks the interrupt of Socket n. Each bit corresponds to each bit of Sn_IR. When a Socket n Interrupt is occurred and the corresponding bit of Sn_IMR is the corresponding bit of Sn_IR becomes When both the corresponding bit of Sn_IMR and Sn_IR are and the n-th bit of IR is Host is interrupted by asserted INTn PIN to low.

Definition at line 677 of file w5200.h.

#define Sn_FRAG (   sn)    (_W5200_IO_BASE_ + WIZCHIP_SREG_BLOCK(sn) + (0x002D))

Fragment field value in IP header register(R/W)

Sn_FRAG configures the FRAG(Fragment field in IP header).

Definition at line 684 of file w5200.h.

Generated on Wed May 4 2016 16:44:00 for Socket APIs by   doxygen 1.8.9.1