IviDmm VI Tree
The VI tree for the IviDmm class driver, including IVI and VXIplug&play required VIs, is shown in the following table.
 |
Note You use the LabVIEW Property Node to get and set properties. |
IviDmm VI Tree
| Name or Class | VI Name | Required By |
|---|---|---|
Initialize |
IviDmm Initialize | VPP |
Initialize With Options |
IviDmm Initialize With Options | IVI |
| Configuration | ||
Configure Measurement |
IviDmm Configure Measurement | IviDmmConfigureMeasurement |
| Specific Measurements | ||
Configure AC Bandwidth [AC] |
IviDmm Configure AC Bandwidth | IviDmmACMeasurement |
Configure Frequency Voltage Range [FRQ] |
IviDmm Configure Frequency Voltage Range | IviDmmFrequencyMeasurement |
| Temperature | ||
Configure Transducer Type [TMP] |
IviDmm Configure Transducer Type | IviDmmTemperatureMeasurement |
Configure Thermocouple [TC] |
IviDmm Configure Thermocouple | IviDmmThermocouple |
Configure Fixed Ref Junction [TC] |
IviDmm Configure Fixed Ref Junction | IviDmmThermocouple |
Confident RTD [RTD] |
IviDmm Configure RTD | IviDmmResistanceTemperatureDevice |
Configure Thermistor [THM] |
IviDmm Configure Thermistor | IviDmmThermistor |
| Trigger | ||
Configure Trigger |
IviDmm Configure Trigger | IviDmm |
Configure Trigger Slope |
IviDmm Configure Trigger Slope | IviDmmTriggerSlope |
| Multipoint | ||
Configure Multipoint [MP] |
IviDmm Configure Multipoint | IviDmmMultiPoint |
Configure Meas Complete Dest [MP] |
IviDmm Configure Meas Complete Dest | IviDmmMultiPoint |
| Measurement Operation Options | ||
Configure Auto Zero Mode [AZ] |
IviDmm Configure Auto Zero Mode | IviDmmAutoZero |
Configure Power Line Frequency [PLF] |
IviDmm Configure Power Line Frequency | IviDmmPowerLineFrequency |
| Configuration Information | ||
Get Auto Range Value [ARV] |
IviDmm Get Auto Range Value | IviDmmAutoRangeValue |
Get Aperture Time Info [DI] |
IviDmm Get Aperture Time Info | IviDmmDeviceInfo |
| Measurement | ||
Read |
IviDmm Read | IviDmm |
Read Multipoint [MP] |
IviDmm Read Multipoint | IviDmmMultiPoint |
| Low-Level Measurement | ||
Initiate |
IviDmm Initiate | IviDmm |
Send Software Trigger |
IviDmm Send Software Trigger | IviDmmSoftwareTrigger |
Fetch |
IviDmm Fetch | IviDmm |
Fetch Multipoint [MP] |
IviDmm Fetch Multiple Point | IviDmmMultiPoint |
Abort |
IviDmm Abort | IviDmm |
Is Overrange |
IviDmm Is Over-Range | IviDmm |
| Utility | ||
Reset |
IviDmm Reset | VPP |
Reset With Defaults |
Reset With Defaults | VPP |
Self-Test |
IviDmm Self-Test | VPP |
Disable |
Disable | VPP |
Invalidate All Attributes |
Invalidate All Attributes | VPP |
Revision Query |
IviDmm Revision Query | VPP |
Error-Query |
IviDmm Error-Query | VPP |
Error Message |
IviDmm Error Message | VPP |
| Interchangeability Info | ||
Get Next Interchange Warning |
IviDmm Get Next Interchange Warning | IVI |
Reset Interchange Check |
IviDmm Reset Interchange Check | IVI |
Clear Interchange Warnings |
IviDmm Clear Interchange Warnings | IVI |
| Coercion Info | ||
Get Next Coercion Record |
IviDmm Get Next Coercion Record | IVI |
Close |
IviDmm Close | VPP |