ClassPrefix Channel Count
Inherent Property
| Data Type | Access | Applies to | Coercion | High Level Functions |
|---|---|---|---|---|
 |
RO | N/A | None | None |
Description
Returns the number of available channels.
Property Node Path
ClassPrefix»Inherent IVI Settings»User Options»Channel Count
Table of contents
-
IVI Class Driver Help for LabVIEW
- Using Help
- Overview
- Related Documentation
- Sample Programs
-
IVI Inherent Capabilities
- VIs
-
Properties
- Attribute Capabilities
- Cache
- Channel Count
- Class Driver Description
- Class Driver Prefix
- Class Driver Revision
- Class Driver Vendor
- Class Specification Major Version
- Class Specification Minor Version
- Driver Setup
- Firmware Revision
- Function Capabilities
- Group Capabilities
- Interchange Check
- Logical Name
- Manufacturer
- Model
- Query Instrument Status
- Range Check
- Record Value Coercions
- Resource Descriptor
- Simulate
- Specific Driver Class Specification Major Version
- Specific Driver Class Specification Minor Version
- Specific Driver Description
- Specific Driver Locator
- Specific Driver Prefix
- Specific Driver Revision
- Specific Driver Vendor
- Spy
- Supported Instrument Models
- Use Specific Simulation
- Interchangeability Checking
- IVI Status Codes
-
IviDCPwr
- Terminology
- Overview
- Extension Capability Groups
- Behavior Models
- VI Tree
- Properties by Group
- Property Value Definitions
- Error and Warning Codes
-
VIs
- Abort
- Configure Current Limit
- Configure Output Enabled
- Configure Output Range
- Configure OVP
- Configure Trigger Source
- Configure Triggered Current Limit
- Configure Triggered Voltage Level
- Configure Voltage Level
- Get Channel Name
- Initiate
- Measure
- Query Max Current Limit
- Query Max Voltage Level
- Query Output State
- Reset Output Protection
- Send Software Trigger
- Properties
-
Values
- IVIDCPWR_VAL_CURRENT_REGULATE
- IVIDCPWR_VAL_CURRENT_TRIP
- IVIDCPWR_VAL_SOFTWARE_TRIG
- IVIDCPWR_VAL_TRIG_ECL0
- IVIDCPWR_VAL_TRIG_ECL1
- IVIDCPWR_VAL_TRIG_EXTERNAL
- IVIDCPWR_VAL_TRIG_IMMEDIATE
- IVIDCPWR_VAL_TRIG_IMMEDIATE
- IVIDCPWR_VAL_TRIG_PXI_STAR
- IVIDCPWR_VAL_TRIG_RTSI_0
- IVIDCPWR_VAL_TRIG_RTSI_1
- IVIDCPWR_VAL_TRIG_RTSI_2
- IVIDCPWR_VAL_TRIG_RTSI_3
- IVIDCPWR_VAL_TRIG_RTSI_4
- IVIDCPWR_VAL_TRIG_RTSI_5
- IVIDCPWR_VAL_TRIG_RTSI_6
- IVIDCPWR_VAL_TRIG_TTL0
- IVIDCPWR_VAL_TRIG_TTL1
- IVIDCPWR_VAL_TRIG_TTL2
- IVIDCPWR_VAL_TRIG_TTL3
- IVIDCPWR_VAL_TRIG_TTL4
- IVIDCPWR_VAL_TRIG_TTL5
- IVIDCPWR_VAL_TRIG_TTL6
- IVIDCPWR_VAL_TRIG_TTL7
- Properties for Controlling IviDCPwr Simulation
-
IviDmm
- Overview
- Extension Capability Groups
- Behavior Models
- VI Tree
- Properties by Group
- Property Value Definitions
- Error and Warning Codes
-
VIs
- Abort
- Configure AC Bandwidth
- Configure Auto Zero Mode
- Configure Fixed Ref Junction
- Configure Frequency Voltage Range
- Configure Meas Complete Dest
- Configure Measurement
- Configure MultiPoint
- Configure Power Line Frequency
- Configure RTD
- Configure Thermistor
- Configure Thermocouple
- Configure Transducer Type
- Configure Trigger
- Configure Trigger Slope
- Fetch
- Fetch MultiPoint
- Get Aperture Time Info
- Get Auto Range Value
- Initiate
- Is Over-Range
- Read
- Read MultiPoint
- Send Software Trigger
-
Properties
- Active Channel
- AC Maximum Frequency
- AC Minimum Frequency
- Aperture Time
- Aperture Time Units
- Auto Range Value
- Auto Zero
- Fixed Reference Junction
- Frequency Voltage Range
- Function
- Meas Complete Destination
- Powerline Frequency
- Range
- Reference Junction Type
- Resolution
- RTD Alpha
- RTD Resistance
- Sample Count
- Sample Interval
- Sample Trigger
- Thermistor Resistance
- Thermocouple Type
- Transducer Type
- Trigger Count
- Trigger Delay
- Trigger Slope
- Trigger Source
-
Values
- IVIDMM_VAL_2_WIRE_RES
- IVIDMM_VAL_2_WIRE_RTD
- IVIDMM_VAL_4_WIRE_RES
- IVIDMM_VAL_4_WIRE_RTD
- IVIDMM_VAL_AC_CURRENT
- IVIDMM_VAL_AC_PLUS_DC_CURRENT
- IVIDMM_VAL_AC_PLUS_DC_VOLTS
- IVIDMM_VAL_AC_VOLTS
- IVIDMM_VAL_AUTO_DELAY_OFF
- IVIDMM_VAL_AUTO_DELAY_ON
- IVIDMM_VAL_AUTO_RANGE_OFF
- IVIDMM_VAL_AUTO_RANGE_ON
- IVIDMM_VAL_AUTO_RANGE_ONCE
- IVIDMM_VAL_AUTO_ZERO_OFF
- IVIDMM_VAL_AUTO_ZERO_ON
- IVIDMM_VAL_AUTO_ZERO_ONCE
- IVIDMM_VAL_DC_CURRENT
- IVIDMM_VAL_DC_VOLTS
- IVIDMM_VAL_ECL0
- IVIDMM_VAL_ECL1
- IVIDMM_VAL_EXTERNAL
- IVIDMM_VAL_EXTERNAL (for MEAS_COMPLETE_DEST)
- IVIDMM_VAL_EXTERNAL (for SAMPLE_TRIGGER)
- IVIDMM_VAL_EXTERNAL (for TRIGGER_SOURCE)
- IVIDMM_VAL_EXTERNAL for IviDmm Meas Complete Destination
- IVIDMM_VAL_EXTERNAL for IviDmm Trigger Source
- IVIDMM_VAL_FREQ
- IVIDMM_VAL_IMMEDIATE
- IVIDMM_VAL_INTERVAL
- IVIDMM_VAL_NEGATIVE
- IVIDMM_VAL_NONE
- IVIDMM_VAL_PERIOD
- IVIDMM_VAL_POSITIVE
- IVIDMM_VAL_POWER_LINE_CYCLES
- IVIDMM_VAL_PXI_STAR
- IVIDMM_VAL_RTSI_0
- IVIDMM_VAL_RTSI_1
- IVIDMM_VAL_RTSI_2
- IVIDMM_VAL_RTSI_3
- IVIDMM_VAL_RTSI_4
- IVIDMM_VAL_RTSI_5
- IVIDMM_VAL_RTSI_6
- IVIDMM_VAL_SECONDS
- IVIDMM_VAL_SOFTWARE_TRIG
- IVIDMM_VAL_TEMPERATURE
- IVIDMM_VAL_TEMP_F
- IVIDMM_VAL_TEMP_REF_JUNC_FIXED
- IVIDMM_VAL_TEMP_REF_JUNC_INTERNAL
- IVIDMM_VAL_TEMP_TC_B
- IVIDMM_VAL_TEMP_TC_C
- IVIDMM_VAL_TEMP_TC_D
- IVIDMM_VAL_TEMP_TC_E
- IVIDMM_VAL_TEMP_TC_G
- IVIDMM_VAL_TEMP_TC_J
- IVIDMM_VAL_TEMP_TC_K
- IVIDMM_VAL_TEMP_TC_N
- IVIDMM_VAL_TEMP_TC_R
- IVIDMM_VAL_TEMP_TC_S
- IVIDMM_VAL_TEMP_TC_T
- IVIDMM_VAL_TEMP_TC_U
- IVIDMM_VAL_TEMP_TC_V
- IVIDMM_VAL_THERMISTOR
- IVIDMM_VAL_THERMOCOUPLE
- IVIDMM_VAL_TTL0
- IVIDMM_VAL_TTL1
- IVIDMM_VAL_TTL2
- IVIDMM_VAL_TTL3
- IVIDMM_VAL_TTL4
- IVIDMM_VAL_TTL5
- IVIDMM_VAL_TTL6
- IVIDMM_VAL_TTL7
- Properties for Controlling IviDmm Simulation
-
IviFgen
- Overviews
- Extension Capability Groups
- Behavior Models
- VI Tree
- Properties by Group
- Property Value Definitions
- Error and Warning Codes
-
VIs
- Abort Generation
- Clear Arbitrary Memory
- Clear Arbitrary Sequence
- Clear Arbitrary Waveform
- Configure AM Enabled
- Configure AM Internal
- Configure AM Source
- Configure Arb Frequency
- Configure Arbitrary Sequence
- Configure Arbitrary Waveform
- Configure Burst Count
- Configure FM Enabled
- Configure FM Internal
- Configure FM Source
- Configure Internal Trigger Rate
- Configure Operation Mode
- Configure Output Enabled
- Configure Output Impedance
- Configure Output Mode
- Configure Ref Clock Source
- Configure Sample Rate
- Configure Standard Waveform
- Configure Trigger Source
- Create Arbitrary Sequence
- Create Arbitrary Waveform
- Get Channel Name
- Initiate Generation
- Query Arb Sequence Capabilities
- Query Arb Waveform Capabilities
- Send Software Trigger
-
Properties
- Active Channel
- AM Enabled
- AM Internal Depth
- AM Internal Frequency
- AM Internal Waveform
- AM Source
- Arb Frequency
- Arb Sample Rate
- Arbitrary Sequence Handle
- Arbitrary Waveform Gain
- Arbitrary Waveform Handle
- Arbitrary Waveform Offset
- Burst Count
- Channel Count
- DC Offset
- Duty Cycle High
- FM Enabled
- FM Internal Frequency
- FM Internal Waveform
- FM Internal Deviation
- FM Source
- Frequency
- Func Amplitude
- Internal Trigger Rate
- Max Loop Count
- Max Number of Sequences
- Max Number of Waveforms
- Max Sequence Length
- Max Waveform Size
- Min Sequence Length
- Min Waveform Size
- Operation Mode
- Output Enabled
- Output Impedance
- Output Mode
- Reference Clock Source
- Start Phase
- Trigger Source
- Waveform
- Waveform Quantum
-
Values
- IVIFGEN_VAL_AM_EXTERNAL
- IVIFGEN_VAL_AM_INTERNAL
- IVIFGEN_VAL_AM_INTERNAL_RAMP_DOWN
- IVIFGEN_VAL_AM_INTERNAL_RAMP_UP
- IVIFGEN_VAL_AM_INTERNAL_SINE
- IVIFGEN_VAL_AM_INTERNAL_SQUARE
- IVIFGEN_VAL_AM_INTERNAL_TRIANGLE
- IVIFGEN_VAL_ECL0
- IVIFGEN_VAL_ECL1
- IVIFGEN_VAL_EXTERNAL
- IVIFGEN_VAL_FM_EXTERNAL
- IVIFGEN_VAL_FM_INTERNAL
- IVIFGEN_VAL_FM_INTERNAL_RAMP_DOWN
- IVIFGEN_VAL_FM_INTERNAL_RAMP_UP
- IVIFGEN_VAL_FM_INTERNAL_SINE
- IVIFGEN_VAL_FM_INTERNAL_SQUARE
- IVIFGEN_VAL_FM_INTERNAL_TRIANGLE
- IVIFGEN_VAL_INTERNAL_TRIGGER
- IVIFGEN_VAL_OPERATE_BURST
- IVIFGEN_VAL_OPERATE_CONTINUOUS
- IVIFGEN_VAL_OUTPUT_ARB
- IVIFGEN_VAL_OUTPUT_FUNC
- IVIFGEN_VAL_OUTPUT_SEQ
- IVIFGEN_VAL_PXI_STAR
- IVIFGEN_VAL_REF_CLOCK_EXTERNAL
- IVIFGEN_VAL_REF_CLOCK_INTERNAL
- IVIFGEN_VAL_REF_CLOCK_RTSI_CLOCK
- IVIFGEN_VAL_REF_CLOCK_RTSI_CLOCK
- IVIFGEN_VAL_RTSI_0
- IVIFGEN_VAL_RTSI_1
- IVIFGEN_VAL_RTSI_2
- IVIFGEN_VAL_RTSI_3
- IVIFGEN_VAL_RTSI_4
- IVIFGEN_VAL_RTSI_5
- IVIFGEN_VAL_RTSI_6
- IVIFGEN_VAL_SOFTWARE_TRIG
- IVIFGEN_VAL_TTL0
- IVIFGEN_VAL_TTL1
- IVIFGEN_VAL_TTL2
- IVIFGEN_VAL_TTL3
- IVIFGEN_VAL_TTL4
- IVIFGEN_VAL_TTL5
- IVIFGEN_VAL_TTL6
- IVIFGEN_VAL_TTL7
- IVIFGEN_VAL_WFM_DC
- IVIFGEN_VAL_WFM_RAMP_DOWN
- IVIFGEN_VAL_WFM_RAMP_UP
- IVIFGEN_VAL_WFM_SINE
- IVIFGEN_VAL_WFM_SQUARE
- IVIFGEN_VAL_WFM_TRIANGLE
- Properties for Controlling IviFgen Simulation
-
IviPwrMeter
- Overview
- Extension Capability Groups
- Behavior Models
- VI Tree
- Properties by Group
- Error and Warning Codes
-
VIs
- Abort
- Calibrate [CAL]
- Configure Averaging Auto Enabled
- Configure Averaging Count [AVG]
- Configure Channel Enabled [CH]
- Configure Correction Frequency
- Configure Duty Cycle Correction [DC]
- Configure Internal Trigger Level [IT]
- Configure Internal Trigger [IT]
- Configure Measurement
- Configure Offset
- Configure Range Auto Enabled
- Configure Range [RNG]
- Configure Reference Oscillator Enabled [RO]
- Configure Reference Oscillator [RO]
- Configure Trigger Source [TRG]
- Configure Units
- Fetch
- Fetch Channel [CH]
- Get Channel Name
- Initiate
- Is Calibration Complete [CAL]
- Is Measurement Complete
- Is Zero Correction Complete [ZC]
- Query Result Range Type
- Read
- Read Channel [CH]
- Send Software Trigger [SWT]
- Zero [ZC]
- Zero All Channels [ZC]
-
Properties
- Active Channel
- Average Count [AVG]
- Averaging Auto Enabled
- Channel Count
- Channel Enabled [CH]
- Correction Frequency
- Duty Cycle Correction Enabled [DC]
- Duty Cycle Correction [DC]
- Internal Trigger Event Source [IT]
- Internal Trigger Level [IT]
- Internal Trigger Slope [IT]
- IviPwrMeter
- Offset
- Range Auto Enabled
- Range Lower [R]
- Range Upper [R]
- Ref Oscillator Enabled [RO]
- Ref Oscillator Frequency [RO]
- Ref Oscillator Level [RO]
- Trigger Source [TRG]
- Units
-
Values
- IVIPWRMETER_VAL_CALIBRATION_COMPLETE
- IVIPWRMETER_VAL_CALIBRATION_IN_PROGRESS
- IVIPWRMETER_VAL_CALIBRATION_STATUS_UNKNOWN
- IVIPWRMETER_VAL_DBM
- IVIPWRMETER_VAL_DBMV
- IVIPWRMETER_VAL_DBUV
- IVIPWRMETER_VAL_DIFFERENCE
- IVIPWRMETER_VAL_ECL0
- IVIPWRMETER_VAL_ECL1
- IVIPWRMETER_VAL_EXTERNAL
- IVIPWRMETER_VAL_IMMEDIATE
- IVIPWRMETER_VAL_INTERNAL
- IVIPWRMETER_VAL_MEAS_COMPLETE
- IVIPWRMETER_VAL_MEAS_IN_PROGRESS
- IVIPWRMETER_VAL_MEAS_STATUS_UNKNOWN
- IVIPWRMETER_VAL_NEGATIVE
- IVIPWRMETER_VAL_NONE
- IVIPWRMETER_VAL_POSITIVE
- IVIPWRMETER_VAL_PXI_STAR
- IVIPWRMETER_VAL_QUOTIENT
- IVIPWRMETER_VAL_RTSI_0
- IVIPWRMETER_VAL_RTSI_1
- IVIPWRMETER_VAL_RTSI_2
- IVIPWRMETER_VAL_RTSI_3
- IVIPWRMETER_VAL_RTSI_4
- IVIPWRMETER_VAL_RTSI_5
- IVIPWRMETER_VAL_RTSI_6
- IVIPWRMETER_VAL_SOFTWARE_TRIG
- IVIPWRMETER_VAL_SUM
- IVIPWRMETER_VAL_TTL0
- IVIPWRMETER_VAL_TTL1
- IVIPWRMETER_VAL_TTL2
- IVIPWRMETER_VAL_TTL3
- IVIPWRMETER_VAL_TTL4
- IVIPWRMETER_VAL_TTL5
- IVIPWRMETER_VAL_TTL6
- IVIPWRMETER_VAL_TTL7
- IVIPWRMETER_VAL_WATTS
- IVIPWRMETER_VAL_ZERO_COMPLETE
- IVIPWRMETER_VAL_ZERO_IN_PROGRESS
- IVIPWRMETER_VAL_ZERO_STATUS_UNKNOWN
-
IviRFSigGen
- Overview
-
Extension Capability Groups
- ALC
- AnalogModulationSource
- ArbGenerator
- Base
- CDMABase
- DigitalModulationBase
- FrequencyStep
- FrequencySweep
- IQImpairment
- LFGenerator
- LFGeneratorOutput
- List
- ModulateAM
- ModulateFM
- ModulateIQ
- ModulatePM
- ModulatePulse
- PowerStep
- PowerSweep
- PulseDoubleGenerator
- PulseGenerator
- PulseGeneratorOutput
- ReferenceOscillator
- SoftwareTrigger
- Sweep
- TDMABase
-
Behavior Models
- ALC
- AnalogModulationSource
- ArbGenerator
- Base
- CDMABase
- DigitalModulationBase
- FrequencyStep
- FrequencySweep
- IQImpairment
- LFGenerator
- LFGeneratorOutput
- List
- ModulateAM
- ModulateFM
- ModulateIQ
- ModulatePM
- ModulatePulse
- PowerStep
- PowerSweep
- PulseDoubleGenerator
- PulseGenerator
- PulseGeneratorOutput
- ReferenceOscillator
- SoftwareTrigger
- Sweep
- TDMABase
- VI Tree
- Properties by Group
- Error and Warning Codes
-
VIs
- Calibrate IQ [MIQ]
- Clear All Arb Waveforms [ARB]
- Clear All DigitalModulationBase Bit Sequences [DMB]
- Clear All Lists [LST]
- Configure ALC Enabled
- Configure ALC [ALC]
- Configure AM Enabled [AM]
- Configure AM External Coupling [AM]
- Configure AM [AM]
- Configure Arb External Trigger Slope [ARB]
- Configure Arb Trigger Source [ARB]
- Configure Arb [ARB]
- Configure CDMA Clock Source [CDMA]
- Configure CDMA External Trigger Slope [CDMA]
- Configure CDMA Trigger Source [CDMA]
- Configure DigitalModulationBase Clock Source [DMB]
- Configure DigitalModulationBase Data Source [DMB]
- Configure DigitalModulationBase PRBS Type [DMB]
- Configure FM Enabled [FM]
- Configure FM External Coupling [FM]
- Configure FM [FM]
- Configure Frequency Step Dwell [FST]
- Configure Frequency Step Start Stop [FST]
- Configure Frequency Sweep Center Span [FSW]
- Configure Frequency Sweep Start Stop [FSW]
- Configure Frequency Sweep Time [FSW]
- Configure IQ Enabled [MIQ]
- Configure IQ Impairment Enabled [IQI]
- Configure IQ Impairment [IQI]
- Configure IQ [MIQ]
- Configure LF Generator Output [LFO]
- Configure LF Generator [LF]
- Configure List Dwell [LST]
- Configure Output Enabled
- Configure PM Enabled [PM]
- Configure PM External Coupling [PM]
- Configure PM [PM]
- Configure Power Step Dwell [PST]
- Configure Power Step Start Stop [PST]
- Configure Power Sweep Start Stop [PSW]
- Configure Power Sweep Time [PSW]
- Configure Pulse Double [DPG]
- Configure Pulse External Trigger [PG]
- Configure Pulse Internal Trigger [PG]
- Configure Pulse Modulation Enabled [PULM]
- Configure Pulse Modulation External Polarity [PULM]
- Configure Pulse Modulation Source [PULM]
- Configure Pulse Output [PGO]
- Configure Pulse [PG]
- Configure Reference Oscillator [RO]
- Configure RF
- Configure Sweep
- Configure TDMA Clock Source [TDMA]
- Configure TDMA External Trigger Slope [TDMA]
- Configure TDMA Trigger Source [TDMA]
- Create Frequency List [LST]
- Create Frequency Power List [LST]
- Create Power List [LST]
- Disable All Modulation
- Get Analog Modulation Source Name [MS]
- Get CDMA Standard Name [CDMA]
- Get CDMA Test Model Name [CDMA]
- Get Digital Modulation Base Standard Name [DMB]
- Get LF Generator Name [LF]
- Get TDMA Frame Name [TDMA]
- Get TDMA Standard Name [TDMA]
- Is Settled
- Query Arb Waveform Capabilities [ARB]
- Reset Frequency Step [FST]
- Reset List [LST]
- Reset Power Step [PST]
- Select Arb Waveform [ARB]
- Select CDMA Standard [CDMA]
- Select CDMA Test Model [CDMA]
- Select DigitalModulationBase Bit Sequence [DMB]
- Select DigitalModulationBase Standard [DMB]
- Select List [LST]
- Select TDMA Frame [TDMA]
- Select TDMA Standard [TDMA]
- Send Software Trigger [SWT]
- Set Active LF Generator [LF]
- Wait Until Settled
- Write Arb Waveform [ARB]
- Write Digital Modulation Base Bit Sequence [DMB]
-
Properties
- Active Channel
- Active LF Generator
- ALC Bandwidth
- ALC Enabled
- ALC Source
- AM Depth
- AM Enabled
- AM External Coupling
- AM Nominal Voltage
- AM Scaling
- AM Source
- ARB Clock Frequency
- ARB External Trigger Slope
- ARB Filter Frequency
- ARB Max Number Waveforms
- ARB Selected Waveform
- ARB Trigger Source
- ARB Waveform Quantum
- ARB Waveform Size Max
- ARB Waveform Size Min
- CDMA Clock Source
- CDMA External Trigger Slope
- CDMA Selected Standard
- CDMA Selected Test Model
- CDMA Standard Count
- CDMA Test Model Count
- CDMA Trigger Source
- DigitalModulationBase Clock Source
- DigitalModulationBase Data Source
- DigitalModulationBase External Clock Type
- DigitalModulationBase PRBS Type
- DigitalModulationBase Selected Bit Sequence
- DigitalModulationBase Selected Standard
- DigitalModulationBase Standard Count
- FM Deviation
- FM Enabled
- FM External Coupling
- FM Nominal Voltage
- FM Source
- Frequency
- Frequency Step Dwell
- Frequency Step Scaling
- Frequency Step Single Step Enabled
- Frequency Step Size
- Frequency Step Start
- Frequency Step Stop
- Frequency Sweep Start
- Frequency Sweep Stop
- Frequency Sweep Time
- IQ Enabled
- IQ Impairment Enabled
- IQ Nominal Voltage
- IQ I Offset
- IQ Q Offset
- IQ Ratio
- IQ Skew
- IQ Source
- IQSwap Enabled
- IviRFSigGenPower Sweep Stop
- LF Generator Count
- LF Generator Frequency
- LF Generator Output Amplitude
- LF Generator Output Enabled
- LF Generator Waveform
- List Dwell
- List Selected Name
- List Single Step Enabled
- Modulation Source Count
- Ouptut Enabled
- PM Deviation
- PM Enabled
- PM External Coupling
- PM Nominal Voltage
- PM Source
- Power Level
- Power Step Dwell
- Power Step Size
- Power Step Start
- Power Step Stop
- Power Sweep Start
- Power Sweep Time
- Pulse Double Delay
- Pulse Double Enabled
- Pulse External Trigger Delay
- Pulse External Trigger Slope
- Pulse Gating Enabled
- Pulse Internal Trigger Period
- Pulse Mod. Enabled
- Pulse Mod. External Polarity
- Pulse Mod. Source
- Pulse Output Enabled
- Pulse Output Polarity
- Pulse Trigger Source
- Pulse Width
- Reference Oscillator External Frequency
- Reference Oscillator Source
- Single Step Enabled
- Sweep Mode
- Sweep Trigger Source
- TDMA Clock Source
- TDMA Clock Type
- TDMA External Trigger Slope
- TDMA Frame Count
- TDMA Selected Frame
- TDMA Selected Standard
- TDMA Standard Count
- TDMA Trigger Source
-
Values
- IVIRFSIGGEN_VAL_ALC_SOURCE_EXTERNAL
- IVIRFSIGGEN_VAL_ALC_SOURCE_INTERNAL
- IVIRFSIGGEN_VAL_AM_EXTERNAL_COUPLING_AC
- IVIRFSIGGEN_VAL_AM_EXTERNAL_COUPLING_DC
- IVIRFSIGGEN_VAL_AM_SCALING_LINEAR
- IVIRFSIGGEN_VAL_AM_SCALING_LOGARITHMIC
- IVIRFSIGGEN_VAL_ARB_EXTERNAL_TRIGGER_SLOPE_NEGATIVE
- IVIRFSIGGEN_VAL_ARB_EXTERNAL_TRIGGER_SLOPE_POSITIVE
- IVIRFSIGGEN_VAL_ARB_TRIGGER_SOURCE_EXTERNAL
- IVIRFSIGGEN_VAL_ARB_TRIGGER_SOURCE_IMMEDIATE
- IVIRFSIGGEN_VAL_ARB_TRIGGER_SOURCE_SOFTWARE
- IVIRFSIGGEN_VAL_CDMA_CLOCK_SOURCE_EXTERNAL
- IVIRFSIGGEN_VAL_CDMA_CLOCK_SOURCE_INTERNAL
- IVIRFSIGGEN_VAL_CDMA_EXTERNAL_TRIGGER_SLOPE_NEGATIVE
- IVIRFSIGGEN_VAL_CDMA_EXTERNAL_TRIGGER_SLOPE_POSITIVE
- IVIRFSIGGEN_VAL_CDMA_TRIGGER_SOURCE_EXTERNAL
- IVIRFSIGGEN_VAL_CDMA_TRIGGER_SOURCE_IMMEDIATE
- IVIRFSIGGEN_VAL_CDMA_TRIGGER_SOURCE_SOFTWARE
- IVIRFSIGGEN_VAL_DIGITAL_MODULATION_BASE_CLOCK_SOURCE_EXTERNAL
- IVIRFSIGGEN_VAL_DIGITAL_MODULATION_BASE_CLOCK_SOURCE_INTERNAL
- IVIRFSIGGEN_VAL_DIGITAL_MODULATION_BASE_DATA_SOURCE_BIT_SEQUENCE
- IVIRFSIGGEN_VAL_DIGITAL_MODULATION_BASE_DATA_SOURCE_EXTERNAL
- IVIRFSIGGEN_VAL_DIGITAL_MODULATION_BASE_DATA_SOURCE_PRBS
- IVIRFSIGGEN_VAL_DIGITAL_MODULATION_BASE_EXTERNAL_CLOCK_TYPE_BIT
- IVIRFSIGGEN_VAL_DIGITAL_MODULATION_BASE_EXTERNAL_CLOCK_TYPE_SYMBOL
- IVIRFSIGGEN_VAL_DIGITAL_MODULATION_BASE_PRBS_TYPE_PRBS11
- IVIRFSIGGEN_VAL_DIGITAL_MODULATION_BASE_PRBS_TYPE_PRBS15
- IVIRFSIGGEN_VAL_DIGITAL_MODULATION_BASE_PRBS_TYPE_PRBS16
- IVIRFSIGGEN_VAL_DIGITAL_MODULATION_BASE_PRBS_TYPE_PRBS20
- IVIRFSIGGEN_VAL_DIGITAL_MODULATION_BASE_PRBS_TYPE_PRBS21
- IVIRFSIGGEN_VAL_DIGITAL_MODULATION_BASE_PRBS_TYPE_PRBS23
- IVIRFSIGGEN_VAL_DIGITAL_MODULATION_BASE_PRBS_TYPE_PRBS9
- IVIRFSIGGEN_VAL_FM_EXTERNAL_COUPLING_AC
- IVIRFSIGGEN_VAL_FM_EXTERNAL_COUPLING_DC
- IVIRFSIGGEN_VAL_FREQUENCY_STEP_SCALING_LINEAR
- IVIRFSIGGEN_VAL_FREQUENCY_STEP_SCALING_LOGARITHMIC
- IVIRFSIGGEN_VAL_IQ_SOURCE_ARB_GENERATOR
- IVIRFSIGGEN_VAL_IQ_SOURCE_CDMA_BASE
- IVIRFSIGGEN_VAL_IQ_SOURCE_DIGITAL_MODULATION_BASE
- IVIRFSIGGEN_VAL_IQ_SOURCE_EXTERNAL
- IVIRFSIGGEN_VAL_IQ_SOURCE_TDMA_BASE
- IVIRFSIGGEN_VAL_LF_GENERATOR_WAVEFORM_RAMP_DOWN
- IVIRFSIGGEN_VAL_LF_GENERATOR_WAVEFORM_RAMP_UP
- IVIRFSIGGEN_VAL_LF_GENERATOR_WAVEFORM_SINE
- IVIRFSIGGEN_VAL_LF_GENERATOR_WAVEFORM_SQUARE
- IVIRFSIGGEN_VAL_LF_GENERATOR_WAVEFORM_TRIANGLE
- IVIRFSIGGEN_VAL_PM_EXTERNAL_COUPLING_AC
- IVIRFSIGGEN_VAL_PM_EXTERNAL_COUPLING_DC
- IVIRFSIGGEN_VAL_PULSE_EXTERNAL_TRIGGER_SLOPE_NEGATIVE
- IVIRFSIGGEN_VAL_PULSE_EXTERNAL_TRIGGER_SLOPE_POSITIVE
- IVIRFSIGGEN_VAL_PULSE_MODULATION_EXTERNAL_POLARITY_INVERSE
- IVIRFSIGGEN_VAL_PULSE_MODULATION_EXTERNAL_POLARITY_NORMAL
- IVIRFSIGGEN_VAL_PULSE_MODULATION_SOURCE_EXTERNAL
- IVIRFSIGGEN_VAL_PULSE_MODULATION_SOURCE_INTERNAL
- IVIRFSIGGEN_VAL_PULSE_OUTPUT_POLARITY_INVERSE
- IVIRFSIGGEN_VAL_PULSE_OUTPUT_POLARITY_NORMAL
- IVIRFSIGGEN_VAL_PULSE_TRIGGER_SOURCE_EXTERNAL
- IVIRFSIGGEN_VAL_PULSE_TRIGGER_SOURCE_INTERNAL
- IVIRFSIGGEN_VAL_REFERENCE_OSCILLATOR_SOURCE_EXTERNAL
- IVIRFSIGGEN_VAL_REFERENCE_OSCILLATOR_SOURCE_INTERNAL
- IVIRFSIGGEN_VAL_SWEEP_MODE_FREQUENCY_STEP
- IVIRFSIGGEN_VAL_SWEEP_MODE_FREQUENCY_SWEEP
- IVIRFSIGGEN_VAL_SWEEP_MODE_LIST
- IVIRFSIGGEN_VAL_SWEEP_MODE_NONE
- IVIRFSIGGEN_VAL_SWEEP_MODE_POWER_STEP
- IVIRFSIGGEN_VAL_SWEEP_MODE_POWER_SWEEP
- IVIRFSIGGEN_VAL_SWEEP_TRIGGER_SOURCE_EXTERNAL
- IVIRFSIGGEN_VAL_SWEEP_TRIGGER_SOURCE_IMMEDIATE
- IVIRFSIGGEN_VAL_SWEEP_TRIGGER_SOURCE_SOFTWARE
- IVIRFSIGGEN_VAL_TDMA_CLOCK_SOURCE_EXTERNAL
- IVIRFSIGGEN_VAL_TDMA_CLOCK_SOURCE_INTERNAL
- IVIRFSIGGEN_VAL_TDMA_EXTERNAL_CLOCK_TYPE_BIT
- IVIRFSIGGEN_VAL_TDMA_EXTERNAL_CLOCK_TYPE_SYMBOL
- IVIRFSIGGEN_VAL_TDMA_EXTERNAL_TRIGGER_SLOPE_NEGATIVE
- IVIRFSIGGEN_VAL_TDMA_EXTERNAL_TRIGGER_SLOPE_POSITIVE
- IVIRFSIGGEN_VAL_TDMA_TRIGGER_SOURCE_EXTERNAL
- IVIRFSIGGEN_VAL_TDMA_TRIGGER_SOURCE_IMMEDIATE
- IVIRFSIGGEN_VAL_TDMA_TRIGGER_SOURCE_SOFTWARE
-
IviScope
- Overview
- Extension Capability Groups
- Behavior Models
- VI Tree
- Properties by Group
- Property Value Definitions
- Error and Warning Codes
-
VIs
- Abort
- Acquisition Status
- Actual Record Length
- Actual Sample Mode
- Actual Sample Rate
- Auto Probe Sense Value
- Auto Setup
- Configure AC Line Trigger Slope
- Configure Acquisition Record
- Configure Acquisition Type
- Configure Channel
- Configure Channel Characteristics
- Configure Edge Trigger Source
- Configure Glitch Trigger Source
- Configure Initiate Continuous
- Configure Interpolation
- Configure Number of Averages
- Configure Number of Envelopes
- Configure Reference Levels
- Configure Runt Trigger Source
- Configure Trigger
- Configure Trigger Coupling
- Configure Trigger Modifier
- Configure TV Trigger Line Number
- Configure TV Trigger Source
- Configure Width Trigger Source
- Fetch Min Max Waveform
- Fetch Waveform
- Fetch Waveform Measurement
- Get Channel Name
- Initiate Acquisition
- Is Invalid Waveform Element
- Read Min Max Waveform
- Read Waveform
- Read Waveform Measurement
-
Properties
- Active Channel
- AC Line Trigger Slope
- Acquisition Start Time
- Acquisition Type
- Channel Count
- Channel Enabled
- Glitch Condition
- Glitch Polarity
- Glitch Width
- Horizontal Minimum Number of Points
- Horizontal Record Length
- Horizontal Sample Rate
- Horizontal Time Per Record
- Initiate Continuous
- Input Impedance
- Interpolation
- Maximum Input Frequency
- Measurement High Reference
- Measurement Low Reference
- Measurement Mid Reference
- Number of Averages
- Number of Envelopes
- Probe Attenuation
- Probe Sense Value
- Runt High Threshold
- Runt Low Threshold
- Runt Polarity
- Sample Mode
- Trigger Coupling
- Trigger Holdoff
- Trigger Level
- Trigger Modifier
- Trigger Slope
- Trigger Source
- Trigger Type
- TV Trigger Event
- TV Trigger Line Number
- TV Trigger Polarity
- TV Trigger Signal Format
- Vertical Coupling
- Vertical Offset
- Vertical Range
- Width Condition
- Width High Threshold
- Width Low Threshold
- Width Polarity
-
Values
- IVISCOPE_VAL_AC_LINE_EITHER
- IVISCOPE_VAL_AC_LINE_NEGATIVE
- IVISCOPE_VAL_AC_LINE_POSITIVE
- IVISCOPE_VAL_AC_LINE_TRIGGER
- IVISCOPE_VAL_AC_TRIGGER
- IVISCOPE_VAL_AC_Trigger_Coupling
- IVISCOPE_VAL_AC_VERTICAL_COUPLING
- IVISCOPE_VAL_ACQ_COMPLETE
- IVISCOPE_VAL_ACQ_IN_PROGRESS
- IVISCOPE_VAL_ACQ_STATUS_UNKNOWN
- IVISCOPE_VAL_AUTO
- IVISCOPE_VAL_AUTO_LEVEL
- IVISCOPE_VAL_AVERAGE
- IVISCOPE_VAL_DC_TRIGGER
- IVISCOPE_VAL_DC_Trigger_Coupling
- IVISCOPE_VAL_DC_VERTICAL_COUPLING
- IVISCOPE_VAL_ECL0
- IVISCOPE_VAL_ECL1
- IVISCOPE_VAL_EDGE_TRIGGER
- IVISCOPE_VAL_ENVELOPE
- IVISCOPE_VAL_EQUIVALENT_TIME
- IVISCOPE_VAL_EXTERNAL
- IVISCOPE_VAL_GLITCH_EITHER
- IVISCOPE_VAL_GLITCH_GREATER_THAN
- IVISCOPE_VAL_GLITCH_LESS_THAN
- IVISCOPE_VAL_GLITCH_NEGATIVE
- IVISCOPE_VAL_GLITCH_POSITIVE
- IVISCOPE_VAL_GLITCH_TRIGGER
- IVISCOPE_VAL_GND
- IVISCOPE_VAL_HF_REJECT
- IVISCOPE_VAL_HI_RES
- IVISCOPE_VAL_IMMEDIATE_TRIGGER
- IVISCOPE_VAL_LF_REJECT
- IVISCOPE_VAL_LINEAR
- IVISCOPE_VAL_MAX_TIME_IMMEDIATE
- IVISCOPE_VAL_MAX_TIME_INFINITE
- IVISCOPE_VAL_NEGATIVE
- IVISCOPE_VAL_NO_INTERPOLATION
- IVISCOPE_VAL_NO_TRIGGER_MOD
- IVISCOPE_VAL_NOISE_REJECT
- IVISCOPE_VAL_NORMAL
- IVISCOPE_VAL_NTSC
- IVISCOPE_VAL_PAL
- IVISCOPE_VAL_PEAK_DETECT
- IVISCOPE_VAL_POSITIVE
- IVISCOPE_VAL_PROBE_SENSE_ON
- IVISCOPE_VAL_PXI_STAR
- IVISCOPE_VAL_REAL_TIME
- IVISCOPE_VAL_RTSI_0
- IVISCOPE_VAL_RTSI_1
- IVISCOPE_VAL_RTSI_2
- IVISCOPE_VAL_RTSI_3
- IVISCOPE_VAL_RTSI_4
- IVISCOPE_VAL_RTSI_5
- IVISCOPE_VAL_RTSI_6
- IVISCOPE_VAL_RUNT_EITHER
- IVISCOPE_VAL_RUNT_NEGATIVE
- IVISCOPE_VAL_RUNT_POSITIVE
- IVISCOPE_VAL_RUNT_TRIGGER
- IVISCOPE_VAL_SECAM
- IVISCOPE_VAL_SINE_X
- IVISCOPE_VAL_TTL0
- IVISCOPE_VAL_TTL1
- IVISCOPE_VAL_TTL2
- IVISCOPE_VAL_TTL3
- IVISCOPE_VAL_TTL4
- IVISCOPE_VAL_TTL5
- IVISCOPE_VAL_TTL6
- IVISCOPE_VAL_TTL7
- IVISCOPE_VAL_TV_EVENT_ANY_FIELD
- IVISCOPE_VAL_TV_EVENT_ANY_LINE
- IVISCOPE_VAL_TV_EVENT_FIELD1
- IVISCOPE_VAL_TV_EVENT_FIELD2
- IVISCOPE_VAL_TV_EVENT_LINE_NUMBER
- IVISCOPE_VAL_TV_FIELD1
- IVISCOPE_VAL_TV_FIELD2
- IVISCOPE_VAL_TV_NEGATIVE
- IVISCOPE_VAL_TV_POSITIVE
- IVISCOPE_VAL_TV_TRIGGER
- IVISCOPE_VAL_WIDTH_NEGATIVE
- IVISCOPE_VAL_WIDTH_OUTSIDE
- IVISCOPE_VAL_WIDTH_POSITIVE
- IVISCOPE_VAL_WIDTH_TRIGGER
- IVISCOPE_VAL_WIDTH_WITHIN
- Properties for Controlling IviScope Simulation
-
IviSpecAn
- Overview
- Extension Capability Groups
- Behavior Models
- VI Tree
- Properties by Group
- Error and Warning Codes
-
VIs
- Abort
- Acquisition Status
- Add Traces [MT]
- Configure Acquisition
- Configure Conversion Loss Table Enabled [EM]
- Configure Conversion Loss Table [EM]
- Configure External Mixer Bias Enabled [EM]
- Configure External Mixer Bias [EM]
- Configure External Mixer Enabled [EM]
- Configure External Mixer Number of Ports [EM]
- Configure External Mixer [EM]
- Configure External Trigger [EXT]
- Configure Frequency Center Span
- Configure Frequency Offset
- Configure Frequency Start Stop
- Configure Level
- Configure Marker Enabled [MKR]
- Configure Marker Frequency Counter [MKR]
- Configure Marker Search [MKR]
- Configure Signal Track Enabled [MKR]
- Configure Sweep Coupling
- Configure Trace Type
- Configure Trigger Source [TRG]
- Configure Video Trigger [VT]
- Copy Trace [MT]
- Disable All Markers [MKR]
- Exchange Traces [MT]
- Fetch Y Trace
- Get Marker Name [MKR]
- Get Trace Name
- Initiate
- Make Marker Delta [DMK]
- Marker Search [MKR]
- Move Marker [MKR]
- Peak Preselector [PS]
- Query Marker Type [MKT]
- Query Marker [MKR]
- Query Reference Marker [DMK]
- Query Trace Size
- Read Y Trace
- Send Software Trigger [SWT]
- Set Active Marker [MKR]
- Set Instrument From Marker [MKR]
- Subtract Traces [MT]
-
Properties
- Active Trace
- Active Marker
- Amplitude Units
- Attenuation
- Attenuation Auto
- Bias
- Bias Enabled
- Bias Limit
- Detector Type
- Detector Type Auto
- External Mixer Average Conversion Loss
- External Mixer Conversion Loss Table Enabled
- External Mixer Enabled
- External Mixer Harmonic
- External Mixer Number of Ports
- External Trigger Level
- External Trigger Slope
- Frequency Offset
- Frequency Start
- Frequency Stop
- Input Impedance
- Marker Amplitude
- Marker Enabled
- Marker Frequency Counter Enabled
- Marker Frequency Counter Resolution
- Marker Position
- Marker Threshold
- Marker Trace
- Marker Type
- Number of Divisions
- Number of Markers
- Number of Sweeps
- Peak Excursion
- Reference Level
- Reference Level Offset
- Reference Marker Amplitude
- Reference Marker Position
- Resolution Bandwidth
- Resolution Bandwidth Auto
- Signal Track Enabled
- Sweep Mode Continuous
- Sweep Time
- Sweep Time Auto
- Trace Count
- Trace Size
- Trace Type
- Trigger Source
- Units Per Division
- Vertical Scale
- Video Bandwidth
- Video Bandwidth Auto
- Video Trigger Level
- Video Trigger Slope
-
Values
- IVISPECAN_VAL_AMPLITUDE_UNITS_DBM
- IVISPECAN_VAL_AMPLITUDE_UNITS_DBMV
- IVISPECAN_VAL_AMPLITUDE_UNITS_DBUV
- IVISPECAN_VAL_AMPLITUDE_UNITS_VOLT
- IVISPECAN_VAL_AMPLITUDE_UNITS_WATT
- IVISPECAN_VAL_DETECTOR_TYPE_AUTO_PEAK
- IVISPECAN_VAL_DETECTOR_TYPE_AVERAGE
- IVISPECAN_VAL_DETECTOR_TYPE_MAX_PEAK
- IVISPECAN_VAL_DETECTOR_TYPE_MIN_PEAK
- IVISPECAN_VAL_DETECTOR_TYPE_RMS
- IVISPECAN_VAL_DETECTOR_TYPE_SAMPLE
- IVISPECAN_VAL_EXTERNAL_TRIGGER_SLOPE_NEGATIVE
- IVISPECAN_VAL_EXTERNAL_TRIGGER_SLOPE_POSITIVE
- IVISPECAN_VAL_INSTRUMENT_SETTING_FREQUENCY_CENTER
- IVISPECAN_VAL_INSTRUMENT_SETTING_FREQUENCY_SPAN
- IVISPECAN_VAL_INSTRUMENT_SETTING_FREQUENCY_START
- IVISPECAN_VAL_INSTRUMENT_SETTING_FREQUENCY_STOP
- IVISPECAN_VAL_INSTRUMENT_SETTING_REFERENCE_LEVEL
- IVISPECAN_VAL_MARKER_SEARCH_HIGHEST
- IVISPECAN_VAL_MARKER_SEARCH_MINIMUM
- IVISPECAN_VAL_MARKER_SEARCH_NEXT_PEAK
- IVISPECAN_VAL_MARKER_SEARCH_NEXT_PEAK_LEFT
- IVISPECAN_VAL_MARKER_SEARCH_NEXT_PEAK_RIGHT
- IVISPECAN_VAL_MARKER_TYPE_DELTA
- IVISPECAN_VAL_MARKER_TYPE_NORMAL
- IVISPECAN_VAL_TRACE_TYPE_CLEAR_WRITE
- IVISPECAN_VAL_TRACE_TYPE_MAX_HOLD
- IVISPECAN_VAL_TRACE_TYPE_MIN_HOLD
- IVISPECAN_VAL_TRACE_TYPE_STORE
- IVISPECAN_VAL_TRACE_TYPE_VIDEO_AVERAGE
- IVISPECAN_VAL_TRACE_TYPE_VIEW
- IVISPECAN_VAL_TRIGGER_SOURCE_AC_LINE
- IVISPECAN_VAL_TRIGGER_SOURCE_EXTERNAL
- IVISPECAN_VAL_TRIGGER_SOURCE_IMMEDIATE
- IVISPECAN_VAL_TRIGGER_SOURCE_SOFTWARE
- IVISPECAN_VAL_TRIGGER_SOURCE_VIDEO
- IVISPECAN_VAL_VERTICAL_SCALE_LINEAR
- IVISPECAN_VAL_VERTICAL_SCALE_LOGARITHMIC
- IVISPECAN_VAL_VIDEO_TRIGGER_SLOPE_NEGATIVE
- IVISPECAN_VAL_VIDEO_TRIGGER_SLOPE_POSITIVE
-
IviSwtch
- Terminology
- Overview
- Extension Capability Groups
- Behavior Models
- VI Tree
- Properties by Group
- Property Value Definitions
- Error and Warning Codes
-
VIs
- Abort Scan
- Can Connect Channels
- Configure Scan List
- Configure Scan Trigger
- Connect Channels
- Disconnect All Channels
- Disconnect Channels
- Get Channel Name
- Get Path
- Initiate Scan
- Send Software Trigger
- Set Continuous Scan
- Set Path
- Switch Is Debounced
- Switch Is Scanning
- Wait For Debounce
- Wait For Scan To Complete
-
Properties
- Active Channel
- AC Voltage
- Bandwidth
- Carry AC Current
- Carry AC Power
- Carry DC Current
- Carry DC Power
- Channel Count
- Characteristic Impedance
- Configuration Channel
- Continuous Scan
- DC Voltage
- Debounced
- Number of Columns
- Number of Rows
- Scan Advanced Output
- Scan Delay
- Scan List
- Scan Mode
- Scanning
- Settling Time
- Source Channel
- Switching AC Current
- Switching AC Power
- Switching DC Current
- Switching DC Power
- Trigger Input
- Wire Mode
-
Values
- IVISWTCH_VAL_BREAK_AFTER_MAKE for IVISWTCH_ATTR_ SCAN_MODE
- IVISWTCH_VAL_BREAK_BEFORE_MAKE for IVISWTCH_ATTR_ SCAN_MODE
- IVISWTCH_VAL_ECL0
- IVISWTCH_VAL_ECL1
- IVISWTCH_VAL_EXTERNAL
- IVISWTCH_VAL_EXTERNAL (for IVISWTCH_ATTR_SCAN_ADVANCED_OUTPUT)
- IVISWTCH_VAL_EXTERNAL (for IVISWTCH_ATTR_TRIGGER_INPUT)
- IVISWTCH_VAL_GPIB_SRQ
- IVISWTCH_VAL_IMMEDIATE
- IVISWTCH_VAL_NONE (for_SCAN_ADVANCED_OUTPUT)
- IVISWTCH_VAL_NONE (for_SCAN_MODE)
- IVISWTCH_VAL_NONE_for_SCAN_ADVANCED_OUTPUT
- IVISWTCH_VAL_NONE for IviSwtch Scan Mode
- IVISWTCH_VAL_PXI_STAR
- IVISWTCH_VAL_RTSI_0
- IVISWTCH_VAL_RTSI_1
- IVISWTCH_VAL_RTSI_2
- IVISWTCH_VAL_RTSI_3
- IVISWTCH_VAL_RTSI_4
- IVISWTCH_VAL_RTSI_5
- IVISWTCH_VAL_RTSI_6
- IVISWTCH_VAL_SOFTWARE_TRIG
- IVISWTCH_VAL_TTL0
- IVISWTCH_VAL_TTL1
- IVISWTCH_VAL_TTL2
- IVISWTCH_VAL_TTL3
- IVISWTCH_VAL_TTL4
- IVISWTCH_VAL_TTL5
- IVISWTCH_VAL_TTL6
- IVISWTCH_VAL_TTL7
- Properties for Controlling IviSwtch Simulation
- Important Information
- Technical Support and Professional Services