niRFSG Configure Ref Clock
Configures the NI-RFSG device reference clock. The reference clock ensures that the NI-RFSG devices are operating from a common timebase. The NI-RFSG device must be in the Configuration state before you call this VI.
Supported Devices: NI 5650/5651/5652/5670/5671/5672
 |
instrument handle identifies your instrument session. instrument handle is obtained from either the niRFSG Initialize VI or the niRFSG Initialize With Options VI. |
||||||||
 |
clock source specifies the source of the reference clock signal. Only certain combinations of clock source and PXI Chassis Clk 10 Source Setting are valid, as shown in the following table.
NI-RFSG sets the Reference Clock Source property to this value. |
||||||||
 |
clock rate (Hz) specifies the reference clock rate, expressed in hertz. The default value, 10 MHz, is the only supported value. |
||||||||
 |
error in accepts error information from previously called VIs. The pop-up option Explain Error (or Explain Warning) gives more information about the error displayed.
|
||||||||
 |
instrument handle out passes a reference to your instrument session to the next VI. instrument handle out is obtained from the niRFSG Initialize VI or the niRFSG Initialize With Options VI and identifies a particular instrument session. |
||||||||
 |
error out passes error or warning information out of a VI to be used by other VIs. The pop-up option Explain Error (or Explain Warning) gives more information about the error displayed.
|
