Adding a TEDS Carrier

To add a TEDS carrier, complete the following steps:

1. Right-click Devices and Interfaces. Select Create New.

   If you are using a remote RT target, expand Remote Systems, find and expand your target, and right-click Devices and Interfaces. Select Create New.

2. In the Create New window, select NI-DAQmx Device»NI-DAQmx TEDS Interface. Select a carrier.
3. Click Finish.

You can also add a TEDS carrier without using the Create New window. Complete the following steps:

1. Right-click Devices and Interfaces»NI-DAQmx Devices.

   If you are using a remote RT target, expand Remote Systems, find and expand your target, and right-click Devices and Interfaces»NI-DAQmx Devices.

2. Select Create New DAQmx Device»NI-DAQmx TEDS Interface.
3. Select a carrier.

In the carrier configuration window, configure your settings.