Adding a RTSI Cable

To add a RTSI cable, complete the following steps:

1. Right-click Devices and Interfaces. Select Create New.

   If you are using a remote RT target, expand Remote Systems, find and expand your target, and right-click Devices and Interfaces. Select Create New.

2. In the Create New window, select NI-DAQmx Devices»RTSI Cable.
3. Click Finish.

You also can add a RTSI cable without using the Create New window.

1. Right-click Devices and Interfaces»NI-DAQmx Devices.
2. Select Create New NI-DAQmx Device»RTSI Cable.