IO.TAPI.ModemStatus

Driver Modicon Modbus

IO.TAPI.ModemStatus

Top  Previous  Next

Type of Tag

I/O Tag

Type of Access

Read-Only

N1 Parameter

-1

N2 Parameter

0

N3 Parameter

3

N4 Parameter

2

String Configuration

IO.TAPI.ModemStatus

 

Returns a String with the current status of a modem. Possible values are the following:

·"No status!": Modem Interface was not open yet or was already closed

·"Modem initialized OK!": Modem Interface was initialized successfully

·"Modem error at initialization!": Driver could not initialize modem's line. Check Driver's log file for more details

·"Modem error at dial!": Driver could not start or accept a call

·"Connecting...": Driver started a call successfully, and is currently processing that call

·"Ringing...": Indicates that the modem is receiving an external call, but it did not accepted it yet

·"Connected!": Driver connected successfully (completed or accepted an external call)

·"Disconnecting...": Driver is turning the current call off

·"Disconnected OK!": Driver turned the current call off

·"Error: no dial tone!": Driver aborted a call because the available line signal was not detected

·"Error: busy!": Driver aborted a call because the line was busy

·"Error: no answer!": Driver aborted a call because no answer was received from the other modem

·"Error: unknown!": Current call was aborted because of an unknown error

 
Has this section of the documentation helped you configure this Driver?
Yes No
Comments (optional):