I/O Tags

Driver Modicon Modbus

previous page next page

I/O Tags

Tags of Ethernet Interface (N2/B2 = 4)

The Tags described next allow controlling and identifying the Ethernet Interface at run time (they are also valid when the RAS Interface is selected):

IMPORTANT

These Tags are available ONLY while a Driver is in Online mode.

The available Tags on this section are the following:

·IO.Ethernet.IPSelect

·IO.Ethernet.IPSwitch


Has this section of the documentation helped you configure this Driver?
Yes	No
Comments (optional):
</td> </tr> <tr class="calibre14"> <td colspan="2" class="calibre16"> <span id="txtCounter" class="contador">There are 150 characters left.</span> </td> </tr> <tr class="calibre14"> <td colspan="2" class="texto1">Contact (optional):</td> </tr> <tr class="calibre14"> <td colspan="2" class="calibre16"> <input id="txtContact" type="text" class="contato" title="E-mail or phone contact (50 characters)" name="texto_contato" maxlength="50"/> </td> </tr> <tr class="calibre17"> <td colspan="2" class="calibre16"> <input type="button" class="texto2" value="Reset" title="Clear form fields" onclick="javascript:resetForm()"/> <input type="button" class="texto2" value="Send" title="Send data to Elipse Software" onclick="javascript:validaSubmit(this.form)"/> </td> </tr> <tr class="calibre15"> <td colspan="2" class="calibre16"> <span class="texto2">Check our <a href="http://kb.elipse.com.br/en-us" title="Elipse Knowledgebase" target="_blank" class="calibre18 pcalibre">Knowledgebase</a> for more information about our products</span> </td> </tr> </table> </form> </div> <div class="calibreEbNav"> <a href="manual_ethernet.html" class="calibreAPrev">previous page</a> <a href="./" class="calibreAHome"> start</a> <a href="manual_ethernet_iotag_ipselect.html" class="calibreANext"> next page</a> </div> </div> </table> </div> </section> <!-- Section <section> <header class="major"> <h2>Ipsum sed dolor</h2> </header> <div class="posts"> <article> <a href="#" class="image"><img src="images/pic01.jpg" alt="" /></a> <h3>Interdum aenean</h3> <p>Aenean ornare velit lacus, ac varius enim lorem ullamcorper dolore. Proin aliquam facilisis ante interdum. Sed nulla amet lorem feugiat tempus aliquam.</p> <ul class="actions"> <li><a href="#" class="button">More</a></li> </ul> </article> <article> <a href="#" class="image"><img src="images/pic02.jpg" alt="" /></a> <h3>Nulla amet dolore</h3> <p>Aenean ornare velit lacus, ac varius enim lorem ullamcorper dolore. Proin aliquam facilisis ante interdum. Sed nulla amet lorem feugiat tempus aliquam.</p> <ul class="actions"> <li><a href="#" class="button">More</a></li> </ul> </article> <article> <a href="#" class="image"><img src="images/pic03.jpg" alt="" /></a> <h3>Tempus ullamcorper</h3> <p>Aenean ornare velit lacus, ac varius enim lorem ullamcorper dolore. Proin aliquam facilisis ante interdum. Sed nulla amet lorem feugiat tempus aliquam.</p> <ul class="actions"> <li><a href="#" class="button">More</a></li> </ul> </article> <article> <a href="#" class="image"><img src="images/pic04.jpg" alt="" /></a> <h3>Sed etiam facilis</h3> <p>Aenean ornare velit lacus, ac varius enim lorem ullamcorper dolore. Proin aliquam facilisis ante interdum. Sed nulla amet lorem feugiat tempus aliquam.</p> <ul class="actions"> <li><a href="#" class="button">More</a></li> </ul> </article> <article> <a href="#" class="image"><img src="images/pic05.jpg" alt="" /></a> <h3>Feugiat lorem aenean</h3> <p>Aenean ornare velit lacus, ac varius enim lorem ullamcorper dolore. Proin aliquam facilisis ante interdum. Sed nulla amet lorem feugiat tempus aliquam.</p> <ul class="actions"> <li><a href="#" class="button">More</a></li> </ul> </article> <article> <a href="#" class="image"><img src="images/pic06.jpg" alt="" /></a> <h3>Amet varius aliquam</h3> <p>Aenean ornare velit lacus, ac varius enim lorem ullamcorper dolore. Proin aliquam facilisis ante interdum. Sed nulla amet lorem feugiat tempus aliquam.</p> <ul class="actions"> <li><a href="#" class="button">More</a></li> </ul> </article> </div> </section> --> </div> </div> <!-- Sidebar --> <!-- Sidebar --> <div id="sidebar"> <div class="inner"> <!-- Search <section id="search" class="alt"> <form method="get" action="https://arb.parts/eo-search.php"> <input type="text" name="executiveorder" id="eo" placeholder="E.O. Number" /> <input type="submit" value="Search E.O." /></form> </section> --> <!-- Menu --> <nav id="menu"> <header class="major"> <h2>Menu</h2> </header> <ul> <li><a href="https://documentation.help/">Homepage</a></li> <!-- <li> <span class="opener">Approved Vehicles</span> <ul> <li><a href="#">Motorcycles</a></li> <li><a href="#">On-Road Vehicles</a></li> <li><a href="#">Off-Road Vehicles</a></li> <li><a href="#">Compression Engines</a></li> </ul> </li> <li><a href="https://arb.parts/Contact-Us">Contact Us</a></li> <li><a href="https://arb.parts/About-Us">About Us</a></li> --> </ul> <div><div class="calibreTocIndex"> <h2> Table of contents</h2> <div> <ul> <li> <a href="modbus_intro.html">Modicon Modbus Driver</a> </li> <li> <a href="modbus_quick_config_guide.html">Quick Configuration Guide</a> <ul> <li> <a href="modbus_quick_config_guide_insert_driver.html">Inserting a Driver</a> <ul> <li> <a href="modbus_add_application.html">Adding a Driver to an Elipse Software Application</a> <ul> <li> <a href="modbus_add_application_e3_power.html">E3 or Elipse Power</a> </li> <li> <a href="modbus_add_application_scada.html">Elipse SCADA</a> </li> </ul> </li> </ul> </li> <li> <a href="modbus_quick_config_guide_config_driver.html">Configuring a Driver</a> </li> <li> <a href="modbus_quick_config_guide_config_iotag.html">Configuring I/O Tags</a> </li> </ul> </li> <li> <a href="modbus_protocol.html">The Modbus Protocol</a> <ul> <li> <a href="modbus_recommended_site.html">Recommended Websites</a> </li> <li> <a href="modbus_supported_function.html">Supported Functions</a> </li> <li> <a href="modbus_special_function.html">Special Functions</a> </li> </ul> </li> <li> <a href="modbus_config.html">Configuration</a> <ul> <li> <a href="modbus_config_property.html">Properties</a> <ul> <li> <a href="modbus_config_property_modbus_tab.html">Modbus Tab</a> </li> <li> <a href="modbus_config_property_operations_tab.html">Operations Tab</a> <ul> <li> <a href="modbus_config_property_operations_tab_supported_datatype.html">Supported Data Types</a> <ul> <li> <a href="modbus_config_property_operations_tab_supported_datatype_gentime.html">GenTime Type</a> </li> <li> <a href="modbus_config_property_operations_tab_supported_datatype_user_defined.html">User-Defined Data Types</a> </li> </ul> </li> <li> <a href="modbus_config_property_operations_tab_import_export_operation.html">Importing and Exporting Operations</a> </li> </ul> </li> <li> <a href="modbus_config_property_gen_soe_tab.html">Gen SOE Tab</a> </li> <li> <a href="modbus_config_property_config_offline_mode.html">Offline Mode Configuration</a> </li> </ul> </li> <li> <a href="modbus_config_tag.html">Configuring Tags</a> <ul> <li> <a href="modbus_config_tag_io.html">Configuring an I/O Tag</a> <ul> <li> <a href="modbus_config_tagsio_string_parametrization.html">String Configuration</a> </li> <li> <a href="modbus_config_tagsio_numericconfig.html">Numerical Configuration</a> </li> <li> <a href="modbus_config_tag_io_tip_modbus_convention.html">Addressing Tips (Modbus Convention)</a> </li> <li> <a href="modbus_config_tag_io_automatic_block_partition.html">Automatic Block Partition</a> </li> <li> <a href="modbus_config_tag_io_superblock_reading.html">Superblock Reading (Grouping)</a> </li> </ul> </li> <li> <a href="modbus_config_tag_special.html">Configuring Special Tags</a> <ul> <li> <a href="modbus_config_tag_special_force_wait_silence.html">Forcing a Wait Silence</a> </li> <li> <a href="modbus_config_tag_special_reading_last_exception_code.html">Reading the Last Exception Code</a> </li> </ul> </li> </ul> </li> <li> <a href="modbus_config_mass_memory_reading.html">Mass Memory Reading</a> <ul> <li> <a href="modbus_config_mass_memory_reading_gepacrx7.html">Reading an Event Buffer from GE PAC RX7 Controllers</a> </li> <li> <a href="modbus_config_mass_memory_reading_sepam204080.html">Reading Events from Schneider Electric Relays from SEPAM 20, 40, and 80 Series</a> </li> <li> <a href="modbus_config_mass_memory_reading_generic_soe_algorithm.html">Elipse Software's Generic SOE Reading Algorithm</a> <ul> <li> <a href="modbus_config_mass_memory_reading_generic_soe_algorithm_event_table.html">Event Table</a> </li> <li> <a href="modbus_config_mass_memory_reading_generic_soe_algorithm_acquisition_plc.html">Acquisition Procedure in a PLC</a> </li> <li> <a href="modbus_config_mass_memory_reading_generic_soe_algorithm_acquisition_application.html">Acquisition Procedure in an Application</a> </li> </ul> </li> <li> <a href="modbus_config_mass_memory_reading_abbmge144.html">Reading Mass Memory Registers from ABB MGE 144 Meters</a> </li> </ul> </li> </ul> </li> <li> <a href="modbus_appendix.html">Appendix</a> <ul> <li> <a href="modbus_appendix_optimization_tip.html">Optimization Tips</a> </li> <li> <a href="modbus_appendix_faq.html">Frequently Asked Questions</a> </li> <li> <a href="modbus_appendix_device_list.html">List of Devices that Communicate with Modbus</a> </li> <li> <a href="modbus_appendix_default_exception_list.html">List of Protocol's Default Exceptions</a> </li> <li> <a href="modbus_appendix_max_limit_block_size.html">Maximum Limit for the Size of Blocks Supported by the Protocol</a> </li> <li> <a href="modbus_appendix_bcd_encoding.html">BCD Encoding</a> </li> </ul> </li> <li> <a href="modbus_iokit.html">Documentation of I/O Interfaces</a> <ul> <li> <a href="manual_config.html">Driver Configuration</a> <ul> <li> <a href="manual_config_iokit_dialog_box.html">Configuration Dialog Box</a> </li> <li> <a href="manual_config_setup.html">Setup Tab</a> </li> <li> <a href="manual_config_serial.html">Serial Tab</a> </li> <li> <a href="manual_config_ethernet.html">Ethernet Tab</a> </li> <li> <a href="manual_config_modem.html">Modem Tab</a> </li> <li> <a href="manual_config_ras.html">RAS Tab</a> </li> </ul> </li> <li> <a href="manual_general.html">General Configurations</a> <ul> <li> <a href="manual_general_iotag.html">I/O Tags</a> <ul> <li> <a href="manual_general_iotag_iokitevent.html">IO.IOKitEvent</a> </li> <li> <a href="manual_general_iotag_physicallayerstatus.html">IO.PhysicalLayerStatus</a> </li> <li> <a href="manual_general_iotag_setconfigurationparameters.html">IO.SetConfigurationParameters</a> </li> <li> <a href="manual_general_iotag_workonline.html">IO.WorkOnline</a> </li> </ul> </li> <li> <a href="manual_general_property.html">Properties</a> <ul> <li> <a href="manual_io_connectionmode.html">IO.ConnectionMode</a> </li> <li> <a href="manual_io_giveupenable.html">IO.GiveUpEnable</a> </li> <li> <a href="manual_io_giveuptries.html">IO.GiveUpTries</a> </li> <li> <a href="manual_io_inactivityenable.html">IO.InactivityEnable</a> </li> <li> <a href="manual_io_inactivityperiodsec.html">IO.InactivityPeriodSec</a> </li> <li> <a href="manual_io_recoverenable.html">IO.RecoverEnable</a> </li> <li> <a href="manual_io_recoverperiodsec.html">IO.RecoverPeriodSec</a> </li> <li> <a href="manual_io_startoffline.html">IO.StartOffline</a> </li> <li> <a href="manual_io_timeoutms.html">IO.TimeoutMs</a> </li> <li> <a href="manual_io_type.html">IO.Type</a> </li> </ul> </li> </ul> </li> <li> <a href="manual_stats.html">Statistical Configuration</a> <ul> <li> <a href="manual_stats_iotag.html">I/O Tags</a> <ul> <li> <a href="manual_stats_iotag_io_stats_partial_bytesrecv.html">IO.Stats.Partial.BytesRecv</a> </li> <li> <a href="manual_stats_iotag_io_stats_partial_bytessent.html">IO.Stats.Partial.BytesSent</a> </li> <li> <a href="manual_stats_iotag_io_stats_partial_timeconnectedseconds.html">IO.Stats.Partial.TimeConnectedSeconds</a> </li> <li> <a href="manual_stats_iotag_io_stats_partial_timedisconnectedseconds.html">IO.Stats.Partial.TimeDisconnectedSeconds</a> </li> <li> <a href="manual_stats_iotag_io_stats_total_bytesrecv.html">IO.Stats.Total.BytesRecv</a> </li> <li> <a href="manual_stats_iotag_io_stats_total_bytessent.html">IO.Stats.Total.BytesSent</a> </li> <li> <a href="manual_stats_iotag_io_stats_total_connectioncount.html">IO.Stats.Total.ConnectionCount</a> </li> <li> <a href="manual_stats_iotag_io_stats_total_timeconnectedseconds.html">IO.Stats.Total.TimeConnectedSeconds</a> </li> <li> <a href="manual_stats_iotag_io_stats_total_timedisconnectedseconds.html">IO.Stats.Total.TimeDisconnectedSeconds</a> </li> </ul> </li> <li> <a href="manual_stats_property.html">Properties</a> </li> </ul> </li> <li> <a href="manual_ethernet.html">Ethernet Interface Configuration</a> <ul> <li> <a href="manual_ethernet_iotag.html">I/O Tags</a> <ul> <li> <a href="manual_ethernet_iotag_ipselect.html">IO.Ethernet.IPSelect</a> </li> <li> <a href="manual_ethernet_iotag_ipswitch.html">IO.Ethernet.IPSwitch</a> </li> </ul> </li> <li> <a href="manual_ethernet_property.html">Properties</a> <ul> <li> <a href="manual_io_ethernet_acceptconnection.html">IO.Ethernet.AcceptConnection</a> </li> <li> <a href="manual_io_ethernet_backupenable.html">IO.Ethernet.BackupEnable</a> </li> <li> <a href="manual_io_ethernet_backupip.html">IO.Ethernet.BackupIP</a> </li> <li> <a href="manual_io_ethernet_backupport.html">IO.Ethernet.BackupPort</a> </li> <li> <a href="manual_io_ethernet_listenport.html">IO.Ethernet.ListenPort</a> </li> <li> <a href="manual_io_ethernet_mainip.html">IO.Ethernet.MainIP</a> </li> <li> <a href="manual_io_ethernet_mainport.html">IO.Ethernet.MainPort</a> </li> <li> <a href="manual_io_ethernet_pingenable.html">IO.Ethernet.PingEnable</a> </li> <li> <a href="manual_io_ethernet_pingtimeoutms.html">IO.Ethernet.PingTimeoutMs</a> </li> <li> <a href="manual_io_ethernet_pingtries.html">IO.Ethernet.PingTries</a> </li> <li> <a href="manual_io_ethernet_transport.html">IO.Ethernet.Transport</a> </li> </ul> </li> </ul> </li> <li> <a href="manual_tapi.html">Modem Interface Configuration</a> <ul> <li> <a href="manual_tapi_iotag.html">I/O Tags</a> <ul> <li> <a href="manual_tapi_iotag_connectionbaudrate.html">IO.TAPI.ConnectionBaudRate</a> </li> <li> <a href="manual_tapi_iotag_dial.html">IO.TAPI.Dial</a> </li> <li> <a href="manual_tapi_iotag_hangup.html">IO.TAPI.HangUp</a> </li> <li> <a href="manual_tapi_iotag_ismodemconnected.html">IO.TAPI.IsModemConnected</a> </li> <li> <a href="manual_tapi_iotag_ismodemconnecting.html">IO.TAPI.IsModemConnecting</a> </li> <li> <a href="manual_tapi_iotag_modemstatus.html">IO.TAPI.ModemStatus</a> </li> <li> <a href="manual_tapi_iotag_phonenumber.html">IO.TAPI.PhoneNumber</a> </li> </ul> </li> <li> <a href="manual_tapi_property.html">Properties</a> <ul> <li> <a href="manual_io_tapi_acceptincoming.html">IO.TAPI.AcceptIncoming</a> </li> <li> <a href="manual_io_tapi_modemid.html">IO.TAPI.ModemID</a> </li> <li> <a href="manual_io_tapi_phonenumber.html">IO.TAPI.PhoneNumber</a> </li> </ul> </li> </ul> </li> <li> <a href="manual_ras.html">RAS Interface Configuration</a> <ul> <li> <a href="manual_ras_iotag.html">I/O Tags</a> </li> <li> <a href="manual_ras_property.html">Properties</a> <ul> <li> <a href="manual_io_ras_atcommand.html">IO.RAS.ATCommand</a> </li> <li> <a href="manual_io_ras_commandtimeoutsec.html">IO.RAS.CommandTimeoutSec</a> </li> </ul> </li> </ul> </li> <li> <a href="manual_serial.html">Serial Interface Configuration</a> <ul> <li> <a href="manual_serial_iotag.html">I/O Tags</a> </li> <li> <a href="manual_serial_property.html">Properties</a> <ul> <li> <a href="manual_io_serial_baudrate.html">IO.Serial.Baudrate</a> </li> <li> <a href="manual_io_serial_ctstimeoutms.html">IO.Serial.CTSTimeoutMs</a> </li> <li> <a href="manual_io_serial_databits.html">IO.Serial.DataBits</a> </li> <li> <a href="manual_io_serial_delayafterms.html">IO.Serial.DelayAfterMs</a> </li> <li> <a href="manual_io_serial_delaybeforems.html">IO.Serial.DelayBeforeMs</a> </li> <li> <a href="manual_io_serial_dtr.html">IO.Serial.DTR</a> </li> <li> <a href="manual_io_serial_interbytedelayus.html">IO.Serial.InterbyteDelayUs</a> </li> <li> <a href="manual_io_serial_interframedelayms.html">IO.Serial.InterframeDelayMs</a> </li> <li> <a href="manual_io_serial_parity.html">IO.Serial.Parity</a> </li> <li> <a href="manual_io_serial_port.html">IO.Serial.Port</a> </li> <li> <a href="manual_io_serial_rts.html">IO.Serial.RTS</a> </li> <li> <a href="manual_io_serial_stopbits.html">IO.Serial.StopBits</a> </li> <li> <a href="manual_io_serial_supressecho.html">IO.Serial.SupressEcho</a> </li> <li> <a href="manual_io_serial_waitcts.html">IO.Serial.WaitCTS</a> </li> </ul> </li> </ul> </li> </ul> </li> <li> <a href="modbus_driver_revision_history.html">Driver Revision History</a> </li> </ul> </div> </div> </div> </nav> <!-- Section <section> <header class="major"> <h2>Ante interdum</h2> </header> <div class="mini-posts"> <article> <a href="#" class="image"><img src="images/pic07.jpg" alt="" /></a> <p>Aenean ornare velit lacus, ac varius enim lorem ullamcorper dolore aliquam.</p> </article> <article> <a href="#" class="image"><img src="images/pic08.jpg" alt="" /></a> <p>Aenean ornare velit lacus, ac varius enim lorem ullamcorper dolore aliquam.</p> </article> <article> <a href="#" class="image"><img src="images/pic09.jpg" alt="" /></a> <p>Aenean ornare velit lacus, ac varius enim lorem ullamcorper dolore aliquam.</p> </article> </div> <ul class="actions"> <li><a href="#" class="button">More</a></li> </ul> </section> --> <!-- Section --> <section> <header class="major"> <h2>Get in touch</h2> </header> <p>Submit feedback about this site to:</p> <ul class="contact"> <li class="fa-envelope-o"><a href="mailto:helpdocs@rehmann.co">helpdocs@rehmann.co</a></li> </ul> </section> <!-- Footer --> <footer id="footer"> <p class="copyright">© <a href="https://documentation.help">documentation.help</a>. Design: <a href="https://rehmann.co">rehmann.co</a>.</p> <ul class="icons"> <!-- <li><a href="https://twitter.com/ca_carb" class="icon fa-twitter"><span class="label">Twitter</span></a></li> <li><a href="http://fb.me/carbparts" class="icon fa-facebook"><span class="label">Facebook</span></a></li> <li><a href="#" class="icon fa-instagram"><span class="label">Instagram</span></a></li>--> </ul> </footer> </div> </div> </div> <!-- Scripts --> <script src="/assets/js/jquery.min.js"></script> <script src="/assets/js/skel.min.js"></script> <script src="/assets/js/util.js"></script> <!--[if lte IE 8]><script src="assets/js/ie/respond.min.js"></script><![endif]--> <script src="/assets/js/main.js"></script> </body> </html> <script src="/cdn-cgi/scripts/7d0fa10a/cloudflare-static/rocket-loader.min.js" data-cf-settings="c073bdbb8074a3bfe31bfc28-\|49" defer></script>