Show All

Remove filters to display all data in a PivotTable list

When items in a field are hidden by filtering a field or filtering by selection, the arrow in the field label is blue. When items are hidden by filtering for top or bottom values, the filtered field displays a funnel icon to the left of the arrow.

1. In the design window, make sure the PivotTable list is activated. For instructions, see Help for your design program.
2. Do one of the following:

   Remove all filters

   • Click the AutoFilter button on the toolbar so that it is not selected.

   Note  If you click AutoFilter again to turn filtering back on, the previously set filters will be reapplied.

   Remove an autofilter or filter by selection from a field

   1. Click the blue arrow of the field from which you want to remove the filter.
   2. Select the (All) check box and click OK.

   Remove a conditional filter from a field

   1. Select the field from which you want to remove conditional filtering.
   2. Click Show Top/Bottom Items on the toolbar, and then click Show All.

Notes

• If you don't want to retain your filters, make sure the AutoFilter button is not selected before you start selecting items to filter. If the button is not selected, selecting new items to filter automatically turns filtering on and removes your former filter settings.
• You can prevent users from removing filters in the browser by clearing the Filter check box on the Protection tab of the Commands and Options dialog box.