Firmware Upgrade

Navigation Path: Settings/Status > Firmware Upgrade

The section provides a means to upgrade the firmware of the connected reader.

To upgrade

• Click Choose Firmware and navigate to the filesystem location where the firmware file is located.
• Select the firmware file and click Open.
• Click Upgrade.
• Upon completion the Status message will change to indicate it has completed.

Note : The latest firmware is always available on http://www.thingmagic.com/index.php/manuals-firmware. It requires a password which can be obtained from ThingMagic Support if you have an active support contract.

Note : This utility can be used to downgrade firmware also.