NI 5620 Front Panel

NI PXI-5660

NI 5620 Front Panel

This section describes the connectors on the hardware front panel of the NI 5620 IF digitizer module. All inputs and outputs are AC-coupled.

ConnectorUse
INPUT Inputs a frequency-translated IF waveform from the NI 5600 downconverter for digitization and measurement.

Connect to the OUTPUT connector on the NI 5600 downconverter module front panel.
REF CLK IN Inputs the NI 5600 internal reference clock signal.

Connect to the lower 10 MHz OUT connector on the NI 5600 downconverter module front panel.
PFI 1 Inputs a digital trigger from an external source. Refer to the NI-SCOPE Help, located at Start»Programs»National Instruments»NI-SCOPE»Documentation, for more information about triggering.

Note  Refer to the NI 5620 Digitizer Specifications, available at Start»Programs»National Instruments»NI-SCOPE, for more information on NI 5620 connectors.