BITMAPINFOHEADER Structure

FreeImage.NET

BITMAPINFOHEADER Structure
This structure contains information about the dimensions and color format of a device-independent bitmap (DIB).

Namespace: FreeImageAPI
Assembly: FreeImageNET (in FreeImageNET.dll) Version: 3.17.0.4 (3.17.0)
Syntax
C#
[SerializableAttribute]
public struct BITMAPINFOHEADER : IEquatable<BITMAPINFOHEADER>

The BITMAPINFOHEADER type exposes the following members.

Methods
  NameDescription
Public methodEquals(Object)
Tests whether the specified object is a BITMAPINFOHEADER structure and is equivalent to this BITMAPINFOHEADER structure.
(Overrides ValueTypeEquals(Object).)
Public methodEquals(BITMAPINFOHEADER)
Tests whether the specified BITMAPINFOHEADER structure is equivalent to this BITMAPINFOHEADER structure.
Public methodGetHashCode
Returns a hash code for this BITMAPINFOHEADER structure.
(Overrides ValueTypeGetHashCode.)
Public methodGetType
Gets the Type of the current instance.
(Inherited from Object.)
Public methodToString
Returns the fully qualified type name of this instance.
(Inherited from ValueType.)
Top
Operators
  NameDescription
Public operatorStatic memberEquality
Tests whether two specified BITMAPINFOHEADER structures are equivalent.
Public operatorStatic memberInequality
Tests whether two specified BITMAPINFOHEADER structures are different.
Top
Fields
  NameDescription
Public fieldbiBitCount
Specifies the number of bits per pixel.The biBitCount member of the BITMAPINFOHEADER structure determines the number of bits that define each pixel and the maximum number of colors in the bitmap. This member must be one of the following values.

ValueMeaning
0Windows 98/Me, Windows 2000/XP: The number of bits-per-pixel is specified or is implied by the JPEG or PNG format.
1 The bitmap is monochrome, and the bmiColors member of BITMAPINFO contains two entries. Each bit in the bitmap array represents a pixel. If the bit is clear, the pixel is displayed with the color of the first entry in the bmiColors table; if the bit is set, the pixel has the color of the second entry in the table.
4 The bitmap has a maximum of 16 colors, and the bmiColors member of BITMAPINFO contains up to 16 entries. Each pixel in the bitmap is represented by a 4-bit index into the color table. For example, if the first byte in the bitmap is 0x1F, the byte represents two pixels. The first pixel contains the color in the second table entry, and the second pixel contains the color in the sixteenth table entry.
8 The bitmap has a maximum of 256 colors, and the bmiColors member of BITMAPINFO contains up to 256 entries. In this case, each byte in the array represents a single pixel.
16 The bitmap has a maximum of 2^16 colors. If the biCompression member of the BITMAPINFOHEADER is BI_RGB, the bmiColors member of BITMAPINFO is NULL. Each WORD in the bitmap array represents a single pixel. The relative intensities of red, green, and blue are represented with five bits for each color component. The value for blue is in the least significant five bits, followed by five bits each for green and red. The most significant bit is not used. The bmiColors color table is used for optimizing colors used on palette-based devices, and must contain the number of entries specified by the biClrUsed member of the BITMAPINFOHEADER.

If the biCompression member of the BITMAPINFOHEADER is BI_BITFIELDS, the bmiColors member contains three DWORD color masks that specify the red, green, and blue components, respectively, of each pixel. Each WORD in the bitmap array represents a single pixel.

Windows NT/Windows 2000/XP: When the biCompression member is BI_BITFIELDS, bits set in each DWORD mask must be contiguous and should not overlap the bits of another mask. All the bits in the pixel do not have to be used.

Windows 95/98/Me: When the biCompression member is BI_BITFIELDS, the system supports only the following 16bpp color masks: A 5-5-5 16-bit image, where the blue mask is 0x001F, the green mask is 0x03E0, and the red mask is 0x7C00; and a 5-6-5 16-bit image, where the blue mask is 0x001F, the green mask is 0x07E0, and the red mask is 0xF800.

24 The bitmap has a maximum of 2^24 colors, and the bmiColors member of BITMAPINFO is NULL. Each 3-byte triplet in the bitmap array represents the relative intensities of blue, green, and red, respectively, for a pixel. The bmiColors color table is used for optimizing colors used on palette-based devices, and must contain the number of entries specified by the biClrUsed member of the BITMAPINFOHEADER.
32 The bitmap has a maximum of 2^32 colors. If the biCompression member of the BITMAPINFOHEADER is BI_RGB, the bmiColors member of BITMAPINFO is NULL. Each DWORD in the bitmap array represents the relative intensities of blue, green, and red, respectively, for a pixel. The high byte in each DWORD is not used. The bmiColors color table is used for optimizing colors used on palette-based devices, and must contain the number of entries specified by the biClrUsed member of the BITMAPINFOHEADER.

If the biCompression member of the BITMAPINFOHEADER is BI_BITFIELDS, the bmiColors member contains three DWORD color masks that specify the red, green, and blue components, respectively, of each pixel. Each DWORD in the bitmap array represents a single pixel.

Windows NT/ 2000: When the biCompression member is BI_BITFIELDS, bits set in each DWORD mask must be contiguous and should not overlap the bits of another mask. All the bits in the pixel do not need to be used.

Windows 95/98/Me: When the biCompression member is BI_BITFIELDS, the system supports only the following 32-bpp color mask: The blue mask is 0x000000FF, the green mask is 0x0000FF00, and the red mask is 0x00FF0000.

Public fieldbiClrImportant
Specifies the number of color indexes that are required for displaying the bitmap. If this value is zero, all colors are required.
Public fieldbiClrUsed
Specifies the number of color indexes in the color table that are actually used by the bitmap. If this value is zero, the bitmap uses the maximum number of colors corresponding to the value of the biBitCount member for the compression mode specified by biCompression.

If iClrUsed is nonzero and the biBitCount member is less than 16, the biClrUsed member specifies the actual number of colors the graphics engine or device driver accesses. If biBitCount is 16 or greater, the biClrUsed member specifies the size of the color table used to optimize performance of the system color palettes. If biBitCount equals 16 or 32, the optimal color palette starts immediately following the three DWORD masks.

When the bitmap array immediately follows the BITMAPINFO structure, it is a packed bitmap. Packed bitmaps are referenced by a single pointer. Packed bitmaps require that the biClrUsed member must be either zero or the actual size of the color table.

Public fieldbiCompression
Specifies the type of compression for a compressed bottom-up bitmap (top-down DIBs cannot be compressed).
ValueMeaning
BI_RGBAn uncompressed format.
BI_RLE8A run-length encoded (RLE) format for bitmaps with 8 bpp. The compression format is a 2-byte format consisting of a count byte followed by a byte containing a color index.
BI_RLE4An RLE format for bitmaps with 4 bpp. The compression format is a 2-byte format consisting of a count byte followed by two word-length color indexes.
BI_BITFIELDSSpecifies that the bitmap is not compressed and that the color table consists of three DWORD color masks that specify the red, green, and blue components, respectively, of each pixel. This is valid when used with 16- and 32-bpp bitmaps.
BI_JPEGWindows 98/Me, Windows 2000/XP: Indicates that the image is a JPEG image.
BI_PNGWindows 98/Me, Windows 2000/XP: Indicates that the image is a PNG image.
Public fieldbiHeight
Specifies the height of the bitmap, in pixels. If biHeight is positive, the bitmap is a bottom-up DIB and its origin is the lower-left corner. If biHeight is negative, the bitmap is a top-down DIB and its origin is the upper-left corner.

If biHeight is negative, indicating a top-down DIB, biCompression must be either BI_RGB or BI_BITFIELDS. Top-down DIBs cannot be compressed.

Windows 98/Me, Windows 2000/XP: If biCompression is BI_JPEG or BI_PNG, the biHeight member specifies the height of the decompressed JPEG or PNG image file, respectively.

Public fieldbiPlanes
Specifies the number of planes for the target device. This value must be set to 1.
Public fieldbiSize
Specifies the size of the structure, in bytes.
Public fieldbiSizeImage
Specifies the size, in bytes, of the image. This may be set to zero for BI_RGB bitmaps.

Windows 98/Me, Windows 2000/XP: If biCompression is BI_JPEG or BI_PNG, biSizeImage indicates the size of the JPEG or PNG image buffer, respectively.

Public fieldbiWidth
Specifies the width of the bitmap, in pixels.

Windows 98/Me, Windows 2000/XP: If biCompression is BI_JPEG or BI_PNG, the biWidth member specifies the width of the decompressed JPEG or PNG image file, respectively.

Public fieldbiXPelsPerMeter
Specifies the horizontal resolution, in pixels-per-meter, of the target device for the bitmap. An application can use this value to select a bitmap from a resource group that best matches the characteristics of the current device.
Public fieldbiYPelsPerMeter
Specifies the vertical resolution, in pixels-per-meter, of the target device for the bitmap.
Top
Remarks
The BITMAPINFO structure combines the BITMAPINFOHEADER structure and a color table to provide a complete definition of the dimensions and colors of a DIB.
See Also