STM32L4R9I_EVAL BSP User Manual: stm32l4r9i_eval_sram.c File Reference

STM32L4R9I_EVAL BSP

stm32l4r9i_eval_sram.c File Reference

This file provides a set of functions needed to drive the IS61WV102416BLL-10MLI SRAM memory mounted on STM32L4R9I-EVAL board. More...

Go to the source code of this file.

Defines

#define SRAM_ADDR_SETUP_TIME   2 /* 10ns with a clock at 120 MHz (period of 8.33 ns) */
#define SRAM_DATA_SETUP_TIME   1 /* 6ns with a clock at 120 MHz (period of 8.33 ns) */
#define SRAM_DATA_HOLD_TIME   0
#define SRAM_TURN_AROUND_TIME   1 /* 4ns with a clock at 120 MHz (period of 8.33 ns) */

Functions

static void SRAM_MspInit (void)
 Initializes SRAM MSP.
uint8_t BSP_SRAM_Init (void)
 Initializes the SRAM device.
uint8_t BSP_SRAM_ReadData (uint32_t uwStartAddress, uint16_t *pData, uint32_t uwDataSize)
 Reads an amount of data from the SRAM device in polling mode.
uint8_t BSP_SRAM_ReadData_DMA (uint32_t uwStartAddress, uint16_t *pData, uint32_t uwDataSize)
 Reads an amount of data from the SRAM device in DMA mode.
uint8_t BSP_SRAM_WriteData (uint32_t uwStartAddress, uint16_t *pData, uint32_t uwDataSize)
 Writes an amount of data from the SRAM device in polling mode.
uint8_t BSP_SRAM_WriteData_DMA (uint32_t uwStartAddress, uint16_t *pData, uint32_t uwDataSize)
 Writes an amount of data from the SRAM device in DMA mode.
void BSP_SRAM_DMA_IRQHandler (void)
 Handles SRAM DMA transfer interrupt request.

Variables

static SRAM_HandleTypeDef sramHandle
static FMC_NORSRAM_TimingTypeDef Timing

Detailed Description

This file provides a set of functions needed to drive the IS61WV102416BLL-10MLI SRAM memory mounted on STM32L4R9I-EVAL board.

Author:
MCD Application Team
  ==============================================================================
                     ##### How to use this driver #####
  ==============================================================================
  [..]
   (#) This driver is used to drive the IS61WV102416BLL-10MLI SRAM external memory mounted
       on STM32L4R9I-EVAL evaluation board.

   (#) This driver does not need a specific component driver for the SRAM device
       to be included with.

   (#) Initialization steps:
       (++) Initialize the SRAM external memory using the BSP_SRAM_Init() function. This
            function includes the MSP layer hardware resources initialization and the
            FMC controller configuration to interface with the external SRAM memory.

   (#) SRAM read/write operations
       (++) SRAM external memory can be accessed with read/write operations once it is
            initialized.
            Read/write operation can be performed with AHB access using the functions
            BSP_SRAM_ReadData()/BSP_SRAM_WriteData(), or by DMA transfer using the functions
            BSP_SRAM_ReadData_DMA()/BSP_SRAM_WriteData_DMA().
       (++) The AHB access is performed with 16-bit width transaction, the DMA transfer
            configuration is fixed at single (no burst) halfword transfer
            (see the SRAM_MspInit() static function).
       (++) User can implement his own functions for read/write access with his desired
            configurations.
       (++) If interrupt mode is used for DMA transfer, the function BSP_SRAM_DMA_IRQHandler()
            is called in IRQ handler file, to serve the generated interrupt once the DMA
            transfer is complete.
  
Attention:

© COPYRIGHT(c) 2017 STMicroelectronics

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. 3. Neither the name of STMicroelectronics nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

Definition in file stm32l4r9i_eval_sram.c.

Generated on Thu Oct 12 2017 10:54:00 for STM32L4R9I_EVAL BSP User Manual by   doxygen 1.7.6.1