STM32L4R9I_EVAL BSP User Manual: stm32l4r9i_eval_ospi_nor.c File Reference

STM32L4R9I_EVAL BSP

stm32l4r9i_eval_ospi_nor.c File Reference

This file includes a standard driver for the MX25UM51245G OSPI memory mounted on STM32L4R9I-EVAL board. More...

Go to the source code of this file.

Defines

#define OSPI_NOR_OCTAL_DISABLE   0x0
#define OSPI_NOR_OCTAL_ENABLE   0x1
#define DUMMY_CYCLES_READ_OCTAL   MX25LM51245G_DUMMY_CYCLES_READ_OCTAL_66M
#define DUMMY_CYCLES_CR_CFG   MX25LM51245G_CR2_DC_66M

Functions

static void OSPI_NOR_MspInit (void)
 Initializes the OSPI MSP.
static void OSPI_NOR_MspDeInit (void)
 De-Initializes the OSPI MSP.
static uint8_t OSPI_NOR_ResetMemory (OSPI_HandleTypeDef *hospi)
 This function reset the OSPI memory.
static uint8_t OSPI_NOR_WriteEnable (OSPI_HandleTypeDef *hospi)
 This function send a Write Enable and wait it is effective.
static uint8_t OSPI_NOR_AutoPollingMemReady (OSPI_HandleTypeDef *hospi, uint32_t Timeout)
 This function read the SR of the memory and wait the EOP.
static uint8_t OSPI_NOR_OctalMode (OSPI_HandleTypeDef *hospi, uint8_t Operation)
 This function enables/disables the octal mode of the memory.
uint8_t BSP_OSPI_NOR_Init (void)
 Initializes the OSPI interface.
uint8_t BSP_OSPI_NOR_DeInit (void)
 De-Initializes the OSPI interface.
uint8_t BSP_OSPI_NOR_Read (uint8_t *pData, uint32_t ReadAddr, uint32_t Size)
 Reads an amount of data from the OSPI memory.
uint8_t BSP_OSPI_NOR_Write (uint8_t *pData, uint32_t WriteAddr, uint32_t Size)
 Writes an amount of data to the OSPI memory.
uint8_t BSP_OSPI_NOR_Erase_Block (uint32_t BlockAddress)
 Erases the specified block of the OSPI memory.
uint8_t BSP_OSPI_NOR_Erase_Sector (uint32_t Sector)
 Erases the specified sector of the OSPI memory.
uint8_t BSP_OSPI_NOR_Erase_Chip (void)
 Erases the entire OSPI memory.
uint8_t BSP_OSPI_NOR_GetStatus (void)
 Reads current status of the OSPI memory.
uint8_t BSP_OSPI_NOR_GetInfo (OSPI_NOR_Info *pInfo)
 Return the configuration of the OSPI memory.
uint8_t BSP_OSPI_NOR_EnableMemoryMappedMode (void)
 Configure the OSPI in memory-mapped mode.
uint8_t BSP_OSPI_NOR_SuspendErase (void)
 This function suspends an ongoing erase command.
uint8_t BSP_OSPI_NOR_ResumeErase (void)
 This function resumes a paused erase command.
uint8_t BSP_OSPI_NOR_EnterDeepPowerDown (void)
 This function enter the OSPI memory in deep power down mode.
uint8_t BSP_OSPI_NOR_LeaveDeepPowerDown (void)
 This function leave the OSPI memory from deep power down mode.

Variables

OSPI_HandleTypeDef OSPINORHandle

Detailed Description

This file includes a standard driver for the MX25UM51245G OSPI memory mounted on STM32L4R9I-EVAL board.

Author:
MCD Application Team
  ==============================================================================
                     ##### How to use this driver #####
  ==============================================================================
  [..]
   (#) This driver is used to drive the MX25UM51245G OSPI external
       memory mounted on STM32L4R9I-EVAL evaluation board.

   (#) This driver need a specific component driver (MX25UM51245G) to be included with.

   (#) Initialization steps:
       (++) Initialize the OPSI external memory using the BSP_OSPI_NOR_Init() function. This
            function includes the MSP layer hardware resources initialization and the
            OSPI interface with the external memory.

   (#) OSPI memory operations
       (++) OSPI memory can be accessed with read/write operations once it is
            initialized.
            Read/write operation can be performed with AHB access using the functions
            BSP_OSPI_NOR_Read()/BSP_OSPI_NOR_Write().
       (++) The function BSP_OSPI_NOR_GetInfo() returns the configuration of the OSPI memory.
            (see the OSPI memory data sheet)
       (++) Perform erase block operation using the function BSP_OSPI_NOR_Erase_Block() and by
            specifying the block address. You can perform an erase operation of the whole
            chip by calling the function BSP_OSPI_NOR_Erase_Chip().
       (++) The function BSP_OSPI_NOR_GetStatus() returns the current status of the OSPI memory.
            (see the OSPI memory data sheet)
  
Attention:

© COPYRIGHT(c) 2017 STMicroelectronics

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. 3. Neither the name of STMicroelectronics nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

Definition in file stm32l4r9i_eval_ospi_nor.c.

Generated on Thu Oct 12 2017 10:54:00 for STM32L4R9I_EVAL BSP User Manual by   doxygen 1.7.6.1