STM32L4R9I_EVAL BSP User Manual
|
Defines | |
#define | EVAL_IDD_SHUNT0_VALUE ((uint16_t) 1000) |
Shunt values on evaluation board in milli ohms. | |
#define | EVAL_IDD_SHUNT1_VALUE ((uint16_t) 24) |
#define | EVAL_IDD_SHUNT2_VALUE ((uint16_t) 620) |
#define | EVAL_IDD_SHUNT4_VALUE ((uint16_t) 10000) |
#define | EVAL_IDD_SHUNT0_STABDELAY ((uint8_t) 149) |
Shunt stabilization delay on evaluation board in milli ohms. | |
#define | EVAL_IDD_SHUNT1_STABDELAY ((uint8_t) 149) |
#define | EVAL_IDD_SHUNT2_STABDELAY ((uint8_t) 149) |
#define | EVAL_IDD_SHUNT4_STABDELAY ((uint8_t) 255) |
#define | EVAL_IDD_AMPLI_GAIN ((uint16_t) 4967) |
IDD Ampli Gain on evaluation board. | |
#define | EVAL_IDD_VDD_MIN ((uint16_t) 1710) |
IDD Vdd Min on evaluation board. | |
Enumerations | |
enum | IDD_StatusTypeDef { IDD_OK = 0, IDD_TIMEOUT = 1, IDD_ZERO_VALUE = 2, IDD_ERROR = 0xFF } |
IDD Status values. More... |
Define Documentation
#define EVAL_IDD_AMPLI_GAIN ((uint16_t) 4967) |
IDD Ampli Gain on evaluation board.
value is gain * 100
Definition at line 95 of file stm32l4r9i_eval_idd.h.
Referenced by BSP_IDD_Init().
#define EVAL_IDD_SHUNT0_STABDELAY ((uint8_t) 149) |
Shunt stabilization delay on evaluation board in milli ohms.
value in millisec
Definition at line 87 of file stm32l4r9i_eval_idd.h.
Referenced by BSP_IDD_Init().
#define EVAL_IDD_SHUNT0_VALUE ((uint16_t) 1000) |
Shunt values on evaluation board in milli ohms.
value in milliohm
Definition at line 79 of file stm32l4r9i_eval_idd.h.
Referenced by BSP_IDD_Init().
#define EVAL_IDD_SHUNT1_STABDELAY ((uint8_t) 149) |
value in millisec
Definition at line 88 of file stm32l4r9i_eval_idd.h.
Referenced by BSP_IDD_Init().
#define EVAL_IDD_SHUNT1_VALUE ((uint16_t) 24) |
#define EVAL_IDD_SHUNT2_STABDELAY ((uint8_t) 149) |
value in millisec
Definition at line 89 of file stm32l4r9i_eval_idd.h.
Referenced by BSP_IDD_Init().
#define EVAL_IDD_SHUNT2_VALUE ((uint16_t) 620) |
#define EVAL_IDD_SHUNT4_STABDELAY ((uint8_t) 255) |
value in millisec
Definition at line 90 of file stm32l4r9i_eval_idd.h.
Referenced by BSP_IDD_Init().
#define EVAL_IDD_SHUNT4_VALUE ((uint16_t) 10000) |
#define EVAL_IDD_VDD_MIN ((uint16_t) 1710) |
IDD Vdd Min on evaluation board.
value in millivolt
Definition at line 100 of file stm32l4r9i_eval_idd.h.
Referenced by BSP_IDD_Init().
Enumeration Type Documentation
enum IDD_StatusTypeDef |
IDD Status values.
Definition at line 67 of file stm32l4r9i_eval_idd.h.
Generated on Thu Oct 12 2017 10:54:00 for STM32L4R9I_EVAL BSP User Manual by 1.7.6.1