STM32L4R9I_EVAL BSP User Manual: stm32l4r9i_eval_sd.c File Reference

STM32L4R9I_EVAL BSP

stm32l4r9i_eval_sd.c File Reference

This file includes the uSD card driver. More...

Go to the source code of this file.

Functions

uint8_t BSP_SD_Init (void)
 Initializes the SD card device.
uint8_t BSP_SD_DeInit (void)
 DeInitializes the SD card device.
uint8_t BSP_SD_ITConfig (void)
 Configures Interrupt mode for SD detection pin.
uint8_t BSP_SD_IsDetected (void)
 Detects if SD card is correctly plugged in the memory slot or not.
uint8_t BSP_SD_ReadBlocks (uint32_t *pData, uint32_t ReadAddr, uint32_t NumOfBlocks, uint32_t Timeout)
 Reads block(s) from a specified address in an SD card, in polling mode.
uint8_t BSP_SD_WriteBlocks (uint32_t *pData, uint32_t WriteAddr, uint32_t NumOfBlocks, uint32_t Timeout)
 Writes block(s) to a specified address in an SD card, in polling mode.
uint8_t BSP_SD_ReadBlocks_DMA (uint32_t *pData, uint32_t ReadAddr, uint32_t NumOfBlocks)
 Reads block(s) from a specified address in an SD card, in DMA mode.
uint8_t BSP_SD_WriteBlocks_DMA (uint32_t *pData, uint32_t WriteAddr, uint32_t NumOfBlocks)
 Writes block(s) to a specified address in an SD card, in DMA mode.
uint8_t BSP_SD_Erase (uint32_t StartAddr, uint32_t EndAddr)
 Erases the specified memory area of the given SD card.
uint8_t BSP_SD_GetCardState (void)
 Gets the current SD card data status.
void BSP_SD_GetCardInfo (BSP_SD_CardInfo *CardInfo)
 Get SD information about specific SD card.
__weak void BSP_SD_MspInit (SD_HandleTypeDef *hsd, void *Params)
 Initializes the SD MSP.
__weak void BSP_SD_MspDeInit (SD_HandleTypeDef *hsd, void *Params)
 De-Initializes the SD MSP.
__weak void BSP_SD_AbortCallback (void)
 BSP SD Abort callback.
__weak void BSP_SD_WriteCpltCallback (void)
 BSP Tx Transfer completed callback.
__weak void BSP_SD_ReadCpltCallback (void)
 BSP Rx Transfer completed callback.
void HAL_SD_AbortCallback (SD_HandleTypeDef *hsd)
 SD Abort callback.
void HAL_SD_TxCpltCallback (SD_HandleTypeDef *hsd)
 Tx Transfer completed callback.
void HAL_SD_RxCpltCallback (SD_HandleTypeDef *hsd)
 Rx Transfer completed callback.

Variables

SD_HandleTypeDef hsd_eval
static uint8_t UseExtiModeDetection = 0

Detailed Description

This file includes the uSD card driver.

Author:
MCD Application Team
  ==============================================================================
                     ##### How to use this driver #####
  ==============================================================================
  (#) This driver is used to drive the micro SD external card mounted on STM32L4R9I_EVAL
     evaluation board.

  (#) This driver does not need a specific component driver for the micro SD device
     to be included with.

  (#) Initialization steps:
       (++) Initialize the micro SD card using the BSP_SD_Init() function. This
            function includes the MSP layer hardware resources initialization (BSP_SD_MspInit())
            and the SDMMC1 interface configuration to interface with the external micro SD. It
            also includes the micro SD initialization sequence.
       (++) To check the SD card presence you can use the function BSP_SD_IsDetected() which
            returns the detection status.
       (++) If SD presence detection interrupt mode is desired, you must configure the
            SD detection interrupt mode by calling the functions BSP_SD_ITConfig().
            The interrupt is generated as an external interrupt whenever the
            micro SD card is plugged/unplugged in/from the evaluation board. The SD detection
            is managed by MFX, so the SD detection interrupt has to be treated by MFX_IRQOUT
            gpio pin IRQ handler.
       (++) The function BSP_SD_GetCardInfo() is used to get the micro SD card information
            which is stored in the structure "HAL_SD_CardInfoTypedef".

  (#) Micro SD card operations
       (++) The micro SD card can be accessed with read/write block(s) operations once
            it is reay for access. The access can be performed whether using the polling
            mode by calling the functions BSP_SD_ReadBlocks()/BSP_SD_WriteBlocks(),
            or by DMA transfer using the functions BSP_SD_ReadBlocks_DMA()/BSP_SD_WriteBlocks_DMA().
       (++) The DMA transfer complete is used with interrupt mode. Once the SD transfer
            is complete, the DMA Tx/Rx transfer complete are handled using the
            BSP_SD_WriteCpltCallback()/BSP_SD_ReadCpltCallback() user callback functions implemented
            by the user at application level.
       (++) The SD erase block(s) is performed using the function BSP_SD_Erase() with specifying
            the number of blocks to erase.
       (++) The SD runtime status is returned when calling the function BSP_SD_GetStatus().
   [..]
  
Attention:

© COPYRIGHT(c) 2017 STMicroelectronics

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. 3. Neither the name of STMicroelectronics nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

Definition in file stm32l4r9i_eval_sd.c.

Generated on Thu Oct 12 2017 10:54:00 for STM32L4R9I_EVAL BSP User Manual by   doxygen 1.7.6.1