|
STM32769I_EVAL BSP User Manual
|
Defines | |
| #define | COMn ((uint8_t)1) |
| #define | EVAL_COM1 USART1 |
| Definition for COM port1, connected to USART1. | |
| #define | EVAL_COM1_CLK_ENABLE() __HAL_RCC_USART1_CLK_ENABLE() |
| #define | EVAL_COM1_CLK_DISABLE() __HAL_RCC_USART1_CLK_DISABLE() |
| #define | EVAL_COM1_TX_PIN GPIO_PIN_9 |
| #define | EVAL_COM1_TX_GPIO_PORT GPIOA |
| #define | EVAL_COM1_TX_GPIO_CLK_ENABLE() __HAL_RCC_GPIOA_CLK_ENABLE() |
| #define | EVAL_COM1_TX_GPIO_CLK_DISABLE() __HAL_RCC_GPIOA_CLK_DISABLE() |
| #define | EVAL_COM1_TX_AF GPIO_AF7_USART1 |
| #define | EVAL_COM1_RX_PIN GPIO_PIN_10 |
| #define | EVAL_COM1_RX_GPIO_PORT GPIOA |
| #define | EVAL_COM1_RX_GPIO_CLK_ENABLE() __HAL_RCC_GPIOA_CLK_ENABLE() |
| #define | EVAL_COM1_RX_GPIO_CLK_DISABLE() __HAL_RCC_GPIOA_CLK_DISABLE() |
| #define | EVAL_COM1_RX_AF GPIO_AF7_USART1 |
| #define | EVAL_COM1_IRQn USART1_IRQn |
| #define | EVAL_COMx_CLK_ENABLE(__INDEX__) do { if((__INDEX__) == COM1) EVAL_COM1_CLK_ENABLE(); } while(0) |
| #define | EVAL_COMx_CLK_DISABLE(__INDEX__) (((__INDEX__) == 0) ? EVAL_COM1_CLK_DISABLE() : 0) |
| #define | EVAL_COMx_TX_GPIO_CLK_ENABLE(__INDEX__) do { if((__INDEX__) == COM1) EVAL_COM1_TX_GPIO_CLK_ENABLE(); } while(0) |
| #define | EVAL_COMx_TX_GPIO_CLK_DISABLE(__INDEX__) (((__INDEX__) == 0) ? EVAL_COM1_TX_GPIO_CLK_DISABLE() : 0) |
| #define | EVAL_COMx_RX_GPIO_CLK_ENABLE(__INDEX__) do { if((__INDEX__) == COM1) EVAL_COM1_RX_GPIO_CLK_ENABLE(); } while(0) |
| #define | EVAL_COMx_RX_GPIO_CLK_DISABLE(__INDEX__) (((__INDEX__) == 0) ? EVAL_COM1_RX_GPIO_CLK_DISABLE() : 0) |
| #define | ADCx ADC3 |
| Definition for Potentiometer, connected to ADC3. | |
| #define | ADCx_CLK_ENABLE() __HAL_RCC_ADC3_CLK_ENABLE() |
| #define | ADCx_CHANNEL_GPIO_CLK_ENABLE() __HAL_RCC_GPIOF_CLK_ENABLE() |
| #define | ADCx_FORCE_RESET() __HAL_RCC_ADC_FORCE_RESET() |
| #define | ADCx_RELEASE_RESET() __HAL_RCC_ADC_RELEASE_RESET() |
| #define | ADCx_CHANNEL_PIN GPIO_PIN_10 |
| #define | ADCx_CHANNEL_GPIO_PORT GPIOF |
| #define | ADCx_CHANNEL ADC_CHANNEL_8 |
| #define | SAMPLINGTIME ADC_SAMPLETIME_3CYCLES |
| #define | ADCx_POLL_TIMEOUT 10 |
| #define | IO_I2C_ADDRESS ((uint16_t)0x84) /*mfx MFX_I2C_ADDR 0*/ |
| Joystick Pins definition. | |
| #define | IO_I2C_ADDRESS_2 ((uint16_t)0x86) /*mfx MFX_I2C_ADDR 1*/ |
| #define | TS_I2C_ADDRESS ((uint16_t)0x54) |
| TouchScreen FT6206 Slave I2C address 1. | |
| #define | TS_I2C_ADDRESS_A02 ((uint16_t)0x70) |
| TouchScreen FT6336G Slave I2C address 2. | |
| #define | CAMERA_I2C_ADDRESS ((uint16_t)0x5A) |
| #define | AUDIO_I2C_ADDRESS ((uint16_t)0x34) |
| #define | EEPROM_I2C_ADDRESS_A01 ((uint16_t)0xA0) |
| #define | EEPROM_I2C_ADDRESS_A02 ((uint16_t)0xA6) |
| #define | EVAL_I2Cx I2C1 |
| #define | EVAL_I2Cx_CLK_ENABLE() __HAL_RCC_I2C1_CLK_ENABLE() |
| #define | EVAL_DMAx_CLK_ENABLE() __HAL_RCC_DMA1_CLK_ENABLE() |
| #define | EVAL_I2Cx_SCL_SDA_GPIO_CLK_ENABLE() __HAL_RCC_GPIOB_CLK_ENABLE() |
| #define | EVAL_I2Cx_FORCE_RESET() __HAL_RCC_I2C1_FORCE_RESET() |
| #define | EVAL_I2Cx_RELEASE_RESET() __HAL_RCC_I2C1_RELEASE_RESET() |
| #define | EVAL_I2Cx_SCL_PIN GPIO_PIN_8 |
| #define | EVAL_I2Cx_SCL_SDA_GPIO_PORT GPIOB |
| #define | EVAL_I2Cx_SCL_SDA_AF GPIO_AF4_I2C1 |
| #define | EVAL_I2Cx_SDA_PIN GPIO_PIN_9 |
| #define | EVAL_I2Cx_EV_IRQn I2C1_EV_IRQn |
| #define | EVAL_I2Cx_ER_IRQn I2C1_ER_IRQn |
Define Documentation
| #define ADCx ADC3 |
Definition for Potentiometer, connected to ADC3.
Definition at line 259 of file stm32f769i_eval.h.
Referenced by BSP_POTENTIOMETER_Init().
| #define ADCx_CHANNEL ADC_CHANNEL_8 |
Definition at line 271 of file stm32f769i_eval.h.
Referenced by BSP_POTENTIOMETER_Init().
| #define ADCx_CHANNEL_GPIO_CLK_ENABLE | ( | ) | __HAL_RCC_GPIOF_CLK_ENABLE() |
Definition at line 261 of file stm32f769i_eval.h.
Referenced by BSP_POTENTIOMETER_Init().
| #define ADCx_CHANNEL_GPIO_PORT GPIOF |
Definition at line 268 of file stm32f769i_eval.h.
Referenced by BSP_POTENTIOMETER_Init().
| #define ADCx_CHANNEL_PIN GPIO_PIN_10 |
Definition at line 267 of file stm32f769i_eval.h.
Referenced by BSP_POTENTIOMETER_Init().
| #define ADCx_CLK_ENABLE | ( | ) | __HAL_RCC_ADC3_CLK_ENABLE() |
Definition at line 260 of file stm32f769i_eval.h.
Referenced by BSP_POTENTIOMETER_Init().
| #define ADCx_FORCE_RESET | ( | ) | __HAL_RCC_ADC_FORCE_RESET() |
Definition at line 263 of file stm32f769i_eval.h.
| #define ADCx_POLL_TIMEOUT 10 |
Definition at line 273 of file stm32f769i_eval.h.
Referenced by BSP_POTENTIOMETER_GetLevel().
| #define ADCx_RELEASE_RESET | ( | ) | __HAL_RCC_ADC_RELEASE_RESET() |
Definition at line 264 of file stm32f769i_eval.h.
| #define AUDIO_I2C_ADDRESS ((uint16_t)0x34) |
Definition at line 327 of file stm32f769i_eval.h.
Referenced by BSP_AUDIO_OUT_Init(), BSP_AUDIO_OUT_Pause(), BSP_AUDIO_OUT_Play(), BSP_AUDIO_OUT_Resume(), BSP_AUDIO_OUT_SetMute(), BSP_AUDIO_OUT_SetOutputMode(), BSP_AUDIO_OUT_SetVolume(), and BSP_AUDIO_OUT_Stop().
| #define CAMERA_I2C_ADDRESS ((uint16_t)0x5A) |
Definition at line 326 of file stm32f769i_eval.h.
Referenced by BSP_CAMERA_Init().
| #define COMn ((uint8_t)1) |
Definition at line 224 of file stm32f769i_eval.h.
| #define EEPROM_I2C_ADDRESS_A01 ((uint16_t)0xA0) |
Definition at line 328 of file stm32f769i_eval.h.
Referenced by BSP_EEPROM_Init().
| #define EEPROM_I2C_ADDRESS_A02 ((uint16_t)0xA6) |
Definition at line 329 of file stm32f769i_eval.h.
Referenced by BSP_EEPROM_Init().
| #define EVAL_COM1 USART1 |
Definition for COM port1, connected to USART1.
Definition at line 229 of file stm32f769i_eval.h.
| #define EVAL_COM1_CLK_DISABLE | ( | ) | __HAL_RCC_USART1_CLK_DISABLE() |
Definition at line 231 of file stm32f769i_eval.h.
| #define EVAL_COM1_CLK_ENABLE | ( | ) | __HAL_RCC_USART1_CLK_ENABLE() |
Definition at line 230 of file stm32f769i_eval.h.
| #define EVAL_COM1_IRQn USART1_IRQn |
Definition at line 245 of file stm32f769i_eval.h.
| #define EVAL_COM1_RX_AF GPIO_AF7_USART1 |
Definition at line 243 of file stm32f769i_eval.h.
| #define EVAL_COM1_RX_GPIO_CLK_DISABLE | ( | ) | __HAL_RCC_GPIOA_CLK_DISABLE() |
Definition at line 242 of file stm32f769i_eval.h.
| #define EVAL_COM1_RX_GPIO_CLK_ENABLE | ( | ) | __HAL_RCC_GPIOA_CLK_ENABLE() |
Definition at line 241 of file stm32f769i_eval.h.
| #define EVAL_COM1_RX_GPIO_PORT GPIOA |
Definition at line 240 of file stm32f769i_eval.h.
| #define EVAL_COM1_RX_PIN GPIO_PIN_10 |
Definition at line 239 of file stm32f769i_eval.h.
| #define EVAL_COM1_TX_AF GPIO_AF7_USART1 |
Definition at line 237 of file stm32f769i_eval.h.
| #define EVAL_COM1_TX_GPIO_CLK_DISABLE | ( | ) | __HAL_RCC_GPIOA_CLK_DISABLE() |
Definition at line 236 of file stm32f769i_eval.h.
| #define EVAL_COM1_TX_GPIO_CLK_ENABLE | ( | ) | __HAL_RCC_GPIOA_CLK_ENABLE() |
Definition at line 235 of file stm32f769i_eval.h.
| #define EVAL_COM1_TX_GPIO_PORT GPIOA |
Definition at line 234 of file stm32f769i_eval.h.
| #define EVAL_COM1_TX_PIN GPIO_PIN_9 |
Definition at line 233 of file stm32f769i_eval.h.
| #define EVAL_COMx_CLK_DISABLE | ( | __INDEX__ | ) | (((__INDEX__) == 0) ? EVAL_COM1_CLK_DISABLE() : 0) |
Definition at line 248 of file stm32f769i_eval.h.
Referenced by BSP_COM_DeInit().
| #define EVAL_COMx_CLK_ENABLE | ( | __INDEX__ | ) | do { if((__INDEX__) == COM1) EVAL_COM1_CLK_ENABLE(); } while(0) |
Definition at line 247 of file stm32f769i_eval.h.
Referenced by BSP_COM_Init().
| #define EVAL_COMx_RX_GPIO_CLK_DISABLE | ( | __INDEX__ | ) | (((__INDEX__) == 0) ? EVAL_COM1_RX_GPIO_CLK_DISABLE() : 0) |
Definition at line 254 of file stm32f769i_eval.h.
| #define EVAL_COMx_RX_GPIO_CLK_ENABLE | ( | __INDEX__ | ) | do { if((__INDEX__) == COM1) EVAL_COM1_RX_GPIO_CLK_ENABLE(); } while(0) |
Definition at line 253 of file stm32f769i_eval.h.
Referenced by BSP_COM_Init().
| #define EVAL_COMx_TX_GPIO_CLK_DISABLE | ( | __INDEX__ | ) | (((__INDEX__) == 0) ? EVAL_COM1_TX_GPIO_CLK_DISABLE() : 0) |
Definition at line 251 of file stm32f769i_eval.h.
| #define EVAL_COMx_TX_GPIO_CLK_ENABLE | ( | __INDEX__ | ) | do { if((__INDEX__) == COM1) EVAL_COM1_TX_GPIO_CLK_ENABLE(); } while(0) |
Definition at line 250 of file stm32f769i_eval.h.
Referenced by BSP_COM_Init().
| #define EVAL_DMAx_CLK_ENABLE | ( | ) | __HAL_RCC_DMA1_CLK_ENABLE() |
Definition at line 343 of file stm32f769i_eval.h.
| #define EVAL_I2Cx I2C1 |
Definition at line 341 of file stm32f769i_eval.h.
Referenced by I2Cx_Init().
| #define EVAL_I2Cx_CLK_ENABLE | ( | ) | __HAL_RCC_I2C1_CLK_ENABLE() |
Definition at line 342 of file stm32f769i_eval.h.
Referenced by I2Cx_MspInit().
| #define EVAL_I2Cx_ER_IRQn I2C1_ER_IRQn |
Definition at line 357 of file stm32f769i_eval.h.
Referenced by I2Cx_MspInit().
| #define EVAL_I2Cx_EV_IRQn I2C1_EV_IRQn |
Definition at line 356 of file stm32f769i_eval.h.
Referenced by I2Cx_MspInit().
| #define EVAL_I2Cx_FORCE_RESET | ( | ) | __HAL_RCC_I2C1_FORCE_RESET() |
Definition at line 346 of file stm32f769i_eval.h.
Referenced by I2Cx_MspInit().
| #define EVAL_I2Cx_RELEASE_RESET | ( | ) | __HAL_RCC_I2C1_RELEASE_RESET() |
Definition at line 347 of file stm32f769i_eval.h.
Referenced by I2Cx_MspInit().
| #define EVAL_I2Cx_SCL_PIN GPIO_PIN_8 |
Definition at line 350 of file stm32f769i_eval.h.
Referenced by I2Cx_MspInit().
| #define EVAL_I2Cx_SCL_SDA_AF GPIO_AF4_I2C1 |
Definition at line 352 of file stm32f769i_eval.h.
Referenced by I2Cx_MspInit().
| #define EVAL_I2Cx_SCL_SDA_GPIO_CLK_ENABLE | ( | ) | __HAL_RCC_GPIOB_CLK_ENABLE() |
Definition at line 344 of file stm32f769i_eval.h.
Referenced by I2Cx_MspInit().
| #define EVAL_I2Cx_SCL_SDA_GPIO_PORT GPIOB |
Definition at line 351 of file stm32f769i_eval.h.
Referenced by I2Cx_MspInit().
| #define EVAL_I2Cx_SDA_PIN GPIO_PIN_9 |
Definition at line 353 of file stm32f769i_eval.h.
Referenced by I2Cx_MspInit().
| #define IO_I2C_ADDRESS ((uint16_t)0x84) /*mfx MFX_I2C_ADDR 0*/ |
Joystick Pins definition.
Eval Pins definition connected to MFX
Definition at line 315 of file stm32f769i_eval.h.
Referenced by BSP_IO_ConfigIrqOutPin(), BSP_IO_ConfigPin(), BSP_IO_Init(), BSP_IO_ITClear(), BSP_IO_ITClearPin(), BSP_IO_ITGetStatus(), BSP_IO_ReadPin(), BSP_IO_TogglePin(), and BSP_IO_WritePin().
| #define IO_I2C_ADDRESS_2 ((uint16_t)0x86) /*mfx MFX_I2C_ADDR 1*/ |
Definition at line 316 of file stm32f769i_eval.h.
| #define SAMPLINGTIME ADC_SAMPLETIME_3CYCLES |
Definition at line 272 of file stm32f769i_eval.h.
| #define TS_I2C_ADDRESS ((uint16_t)0x54) |
TouchScreen FT6206 Slave I2C address 1.
Definition at line 320 of file stm32f769i_eval.h.
Referenced by BSP_TS_Init().
| #define TS_I2C_ADDRESS_A02 ((uint16_t)0x70) |
TouchScreen FT6336G Slave I2C address 2.
Definition at line 325 of file stm32f769i_eval.h.
Referenced by BSP_TS_Init().
Generated on Thu May 25 2017 11:03:12 for STM32769I_EVAL BSP User Manual by
1.7.6.1