stm32f769i_eval_eeprom.h File Reference

This file contains all the functions prototypes for the stm32f769i_eval_eeprom.c firmware driver. More...

#include "stm32f769i_eval.h"

Go to the source code of this file.

Defines
#define	EEPROM_PAGESIZE   ((uint8_t)4)
#define	EEPROM_MAX_SIZE   ((uint16_t)0x2000) /* 64Kbit */
#define	EEPROM_MAX_TRIALS   ((uint32_t)3000)
#define	EEPROM_OK   ((uint32_t)0)
#define	EEPROM_FAIL   ((uint32_t)1)
#define	EEPROM_TIMEOUT   ((uint32_t)2)
Functions
uint32_t	BSP_EEPROM_Init (void)
	Initializes peripherals used by the I2C EEPROM driver.
uint8_t	BSP_EEPROM_DeInit (void)
	DeInitializes the EEPROM.
uint32_t	BSP_EEPROM_ReadBuffer (uint8_t *pBuffer, uint16_t ReadAddr, uint16_t *NumByteToRead)
	Reads a block of data from the EEPROM.
uint32_t	BSP_EEPROM_WritePage (uint8_t *pBuffer, uint16_t WriteAddr, uint8_t *NumByteToWrite)
	Writes more than one byte to the EEPROM with a single WRITE cycle.
uint32_t	BSP_EEPROM_WriteBuffer (uint8_t *pBuffer, uint16_t WriteAddr, uint16_t NumByteToWrite)
	Writes buffer of data to the I2C EEPROM.
uint32_t	BSP_EEPROM_WaitEepromStandbyState (void)
	Wait for EEPROM Standby state.
void	BSP_EEPROM_TIMEOUT_UserCallback (void)
	Basic management of the timeout situation.
void	EEPROM_IO_Init (void)
	Initializes peripherals used by the I2C EEPROM driver.
HAL_StatusTypeDef	EEPROM_IO_WriteData (uint16_t DevAddress, uint16_t MemAddress, uint8_t *pBuffer, uint32_t BufferSize)
	Write data to I2C EEPROM driver in using DMA channel.
HAL_StatusTypeDef	EEPROM_IO_ReadData (uint16_t DevAddress, uint16_t MemAddress, uint8_t *pBuffer, uint32_t BufferSize)
	Read data from I2C EEPROM driver in using DMA channel.
HAL_StatusTypeDef	EEPROM_IO_IsDeviceReady (uint16_t DevAddress, uint32_t Trials)
	Checks if target device is ready for communication.

---

Detailed Description

This file contains all the functions prototypes for the stm32f769i_eval_eeprom.c firmware driver.

Author:

MCD Application Team

Version:

V2.0.1

Date:

06-April-2017

Attention:

© COPYRIGHT(c) 2017 STMicroelectronics

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. 3. Neither the name of STMicroelectronics nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

Definition in file stm32f769i_eval_eeprom.h.