|
STM3210E_EVAL BSP User Manual
|
Defines | |
| #define | FLASH_SPI_CS_LOW() HAL_GPIO_WritePin(FLASH_SPI_CS_GPIO_PORT, FLASH_SPI_CS_PIN, GPIO_PIN_RESET) |
| M25P FLASH SPI Chip Select macro definition. | |
| #define | FLASH_SPI_CS_HIGH() HAL_GPIO_WritePin(FLASH_SPI_CS_GPIO_PORT, FLASH_SPI_CS_PIN, GPIO_PIN_SET) |
| #define | FLASH_SPI_CS_PIN GPIO_PIN_2 /* PB.02*/ |
| M25P FLASH SPI Control Interface pins. | |
| #define | FLASH_SPI_CS_GPIO_PORT GPIOB |
| #define | FLASH_SPI_CS_GPIO_CLK_ENABLE() __HAL_RCC_GPIOB_CLK_ENABLE() |
| #define | FLASH_SPI_CS_GPIO_CLK_DISABLE() __HAL_RCC_GPIOB_CLK_DISABLE() |
| #define | FLASH_SPI_CMD_WRITE 0x02 |
| M25P FLASH SPI supported commands. | |
| #define | FLASH_SPI_CMD_WRSR 0x01 |
| #define | FLASH_SPI_CMD_WREN 0x06 |
| #define | FLASH_SPI_CMD_READ 0x03 |
| #define | FLASH_SPI_CMD_RDSR 0x05 |
| #define | FLASH_SPI_CMD_RDID 0x9F |
| #define | FLASH_SPI_CMD_SE 0xD8 |
| #define | FLASH_SPI_CMD_BE 0xC7 |
| #define | FLASH_SPI_WIP_FLAG 0x01 |
| #define | FLASH_SPI_DUMMY_BYTE 0xA5 |
| #define | FLASH_SPI_PAGESIZE 0x100 |
| #define | FLASH_SPI_M25P128_ID 0x202018 |
| #define | FLASH_SPI_M25P64_ID 0x202017 |
| #define | AUDIO_I2C_ADDRESS 0x27 |
| AUDIO I2C Interface pins. | |
| #define | AUDIO_RESET_GPIO_CLK_ENABLE() __HAL_RCC_GPIOG_CLK_ENABLE() |
| #define | AUDIO_RESET_PIN GPIO_PIN_11 |
| #define | AUDIO_RESET_GPIO GPIOG |
Define Documentation
| #define AUDIO_I2C_ADDRESS 0x27 |
AUDIO I2C Interface pins.
Definition at line 485 of file stm3210e_eval.h.
Referenced by BSP_AUDIO_OUT_Init(), BSP_AUDIO_OUT_Pause(), BSP_AUDIO_OUT_Play(), BSP_AUDIO_OUT_Resume(), BSP_AUDIO_OUT_SetMute(), BSP_AUDIO_OUT_SetOutputMode(), BSP_AUDIO_OUT_SetVolume(), and BSP_AUDIO_OUT_Stop().
| #define AUDIO_RESET_GPIO GPIOG |
Definition at line 490 of file stm3210e_eval.h.
Referenced by AUDIO_IO_Init(), and BSP_AUDIO_OUT_Stop().
| #define AUDIO_RESET_GPIO_CLK_ENABLE | ( | ) | __HAL_RCC_GPIOG_CLK_ENABLE() |
Definition at line 488 of file stm3210e_eval.h.
Referenced by AUDIO_IO_Init().
| #define AUDIO_RESET_PIN GPIO_PIN_11 |
Definition at line 489 of file stm3210e_eval.h.
Referenced by AUDIO_IO_Init(), and BSP_AUDIO_OUT_Stop().
| #define FLASH_SPI_CMD_BE 0xC7 |
Bulk Erase instruction
Definition at line 470 of file stm3210e_eval.h.
Referenced by BSP_SERIAL_FLASH_EraseBulk().
| #define FLASH_SPI_CMD_RDID 0x9F |
Read identification
Definition at line 468 of file stm3210e_eval.h.
| #define FLASH_SPI_CMD_RDSR 0x05 |
Read Status Register instruction
Definition at line 467 of file stm3210e_eval.h.
Referenced by FLASH_SPI_IO_WaitForWriteEnd().
| #define FLASH_SPI_CMD_READ 0x03 |
Read from Memory instruction
Definition at line 466 of file stm3210e_eval.h.
Referenced by FLASH_SPI_IO_ReadData().
| #define FLASH_SPI_CMD_SE 0xD8 |
Sector Erase instruction
Definition at line 469 of file stm3210e_eval.h.
Referenced by BSP_SERIAL_FLASH_EraseSector().
| #define FLASH_SPI_CMD_WREN 0x06 |
Write enable instruction
Definition at line 465 of file stm3210e_eval.h.
Referenced by FLASH_SPI_IO_WriteEnable().
| #define FLASH_SPI_CMD_WRITE 0x02 |
M25P FLASH SPI supported commands.
Write to Memory instruction
Definition at line 463 of file stm3210e_eval.h.
Referenced by BSP_SERIAL_FLASH_WritePage().
| #define FLASH_SPI_CMD_WRSR 0x01 |
Write Status Register instruction
Definition at line 464 of file stm3210e_eval.h.
| #define FLASH_SPI_CS_GPIO_CLK_DISABLE | ( | ) | __HAL_RCC_GPIOB_CLK_DISABLE() |
Definition at line 458 of file stm3210e_eval.h.
| #define FLASH_SPI_CS_GPIO_CLK_ENABLE | ( | ) | __HAL_RCC_GPIOB_CLK_ENABLE() |
Definition at line 457 of file stm3210e_eval.h.
Referenced by FLASH_SPI_IO_Init().
| #define FLASH_SPI_CS_GPIO_PORT GPIOB |
Definition at line 456 of file stm3210e_eval.h.
Referenced by FLASH_SPI_IO_Init().
| #define FLASH_SPI_CS_HIGH | ( | ) | HAL_GPIO_WritePin(FLASH_SPI_CS_GPIO_PORT, FLASH_SPI_CS_PIN, GPIO_PIN_SET) |
Definition at line 450 of file stm3210e_eval.h.
Referenced by FLASH_SPI_IO_Init(), FLASH_SPI_IO_ReadData(), FLASH_SPI_IO_ReadID(), FLASH_SPI_IO_WaitForWriteEnd(), and FLASH_SPI_IO_WriteEnable().
| #define FLASH_SPI_CS_LOW | ( | ) | HAL_GPIO_WritePin(FLASH_SPI_CS_GPIO_PORT, FLASH_SPI_CS_PIN, GPIO_PIN_RESET) |
M25P FLASH SPI Chip Select macro definition.
Definition at line 449 of file stm3210e_eval.h.
Referenced by FLASH_SPI_IO_ReadData(), FLASH_SPI_IO_ReadID(), FLASH_SPI_IO_WaitForWriteEnd(), and FLASH_SPI_IO_WriteEnable().
| #define FLASH_SPI_CS_PIN GPIO_PIN_2 /* PB.02*/ |
M25P FLASH SPI Control Interface pins.
Definition at line 455 of file stm3210e_eval.h.
Referenced by FLASH_SPI_IO_Init().
| #define FLASH_SPI_DUMMY_BYTE 0xA5 |
Definition at line 474 of file stm3210e_eval.h.
Referenced by FLASH_SPI_IO_ReadData(), FLASH_SPI_IO_ReadID(), FLASH_SPI_IO_WaitForWriteEnd(), and SPIx_Read().
| #define FLASH_SPI_M25P128_ID 0x202018 |
Definition at line 477 of file stm3210e_eval.h.
| #define FLASH_SPI_M25P64_ID 0x202017 |
Definition at line 478 of file stm3210e_eval.h.
| #define FLASH_SPI_PAGESIZE 0x100 |
Definition at line 475 of file stm3210e_eval.h.
Referenced by BSP_SERIAL_FLASH_WriteData().
| #define FLASH_SPI_WIP_FLAG 0x01 |
Write In Progress (WIP) flag
Definition at line 472 of file stm3210e_eval.h.
Referenced by FLASH_SPI_IO_WaitForWriteEnd().
Generated on Fri Feb 24 2017 17:15:12 for STM3210E_EVAL BSP User Manual by
1.7.6.1