STM3210E_EVAL BSP User Manual: stm3210e_eval_nor.c File Reference

STM3210E_EVAL BSP

stm3210e_eval_nor.c File Reference

This file includes a standard driver for the M29W128GL70ZA6E NOR flash memory device mounted on STM3210E-EVAL evaluation board. More...

Go to the source code of this file.

Functions

static void NOR_MspInit (void)
 Initializes the NOR MSP.
uint8_t BSP_NOR_Init (void)
 Initializes the NOR device.
uint8_t BSP_NOR_ReadData (uint32_t uwStartAddress, uint16_t *pData, uint32_t uwDataSize)
 Reads an amount of data from the NOR device.
void BSP_NOR_ReturnToReadMode (void)
 Returns the NOR memory to read mode.
uint8_t BSP_NOR_WriteData (uint32_t uwStartAddress, uint16_t *pData, uint32_t uwDataSize)
 Writes an amount of data to the NOR device.
uint8_t BSP_NOR_ProgramData (uint32_t uwStartAddress, uint16_t *pData, uint32_t uwDataSize)
 Programs an amount of data to the NOR device.
uint8_t BSP_NOR_Erase_Block (uint32_t BlockAddress)
 Erases the specified block of the NOR device.
uint8_t BSP_NOR_Erase_Chip (void)
 Erases the entire NOR chip.
uint8_t BSP_NOR_Read_ID (NOR_IDTypeDef *pNOR_ID)
 Reads NOR flash IDs.
void HAL_NOR_MspWait (NOR_HandleTypeDef *hnor, uint32_t Timeout)
 NOR BSP Wait for Ready/Busy signal.

Variables

static NOR_HandleTypeDef norHandle
static FSMC_NORSRAM_TimingTypeDef Timing

Detailed Description

This file includes a standard driver for the M29W128GL70ZA6E NOR flash memory device mounted on STM3210E-EVAL evaluation board.

Author:
MCD Application Team
Version:
V6.0.2
Date:
29-April-2016
Attention:

© COPYRIGHT(c) 2016 STMicroelectronics

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. 3. Neither the name of STMicroelectronics nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

Definition in file stm3210e_eval_nor.c.

Generated on Fri Feb 24 2017 17:15:11 for STM3210E_EVAL BSP User Manual by   doxygen 1.7.6.1