X-CUBE-SPN7 for X-NUCLEO-IHM07M1: C:/Users/giuseppe scuderi-sl/Desktop/MOTOR CONTROL/Peppe/trunk/Firmware/X-CUBE-SPN7-MC-6STEP/Projects/Multi/Examples/MotorControl/Inc/stm32f0xx_hal_conf.h Source File

X-NUCLEO-IHM07M1 X-CUBE-SPN7

previous page next page
stm32f0xx_hal_conf.h
Go to the documentation of this file.
1 
35 /* Define to prevent recursive inclusion -------------------------------------*/
36 #ifndef __STM32F0xx_HAL_CONF_H
37 #define __STM32F0xx_HAL_CONF_H
38 
39 #ifdef __cplusplus
40  extern "C" {
41 #endif
42 
43 /* Exported types ------------------------------------------------------------*/
44 /* Exported constants --------------------------------------------------------*/
45 
46 /* ########################## Module Selection ############################## */
50 #define HAL_MODULE_ENABLED
51 #define HAL_ADC_MODULE_ENABLED
52 //#define HAL_CAN_MODULE_ENABLED
53 //#define HAL_CEC_MODULE_ENABLED
54 //#define HAL_COMP_MODULE_ENABLED
55 #define HAL_CRC_MODULE_ENABLED
56 //#define HAL_CRYP_MODULE_ENABLED
57 //#define HAL_TSC_MODULE_ENABLED
58 //#define HAL_DAC_MODULE_ENABLED
59 //#define HAL_I2C_MODULE_ENABLED
60 //#define HAL_I2S_MODULE_ENABLED
61 //#define HAL_IWDG_MODULE_ENABLED
62 //#define HAL_LCD_MODULE_ENABLED
63 //#define HAL_LPTIM_MODULE_ENABLED
64 //#define HAL_RNG_MODULE_ENABLED
65 //#define HAL_RTC_MODULE_ENABLED
66 //#define HAL_SPI_MODULE_ENABLED
67 #define HAL_TIM_MODULE_ENABLED
68 #define HAL_UART_MODULE_ENABLED
69 //#define HAL_USART_MODULE_ENABLED
70 //#define HAL_IRDA_MODULE_ENABLED
71 //#define HAL_SMARTCARD_MODULE_ENABLED
72 //#define HAL_SMBUS_MODULE_ENABLED
73 //#define HAL_WWDG_MODULE_ENABLED
74 //#define HAL_PCD_MODULE_ENABLED
75 #define HAL_CORTEX_MODULE_ENABLED
76 #define HAL_DMA_MODULE_ENABLED
77 #define HAL_FLASH_MODULE_ENABLED
78 #define HAL_GPIO_MODULE_ENABLED
79 #define HAL_PWR_MODULE_ENABLED
80 #define HAL_RCC_MODULE_ENABLED
81 
82 /* ########################## HSE/HSI Values adaptation ##################### */
88 #if !defined (HSE_VALUE)
89  #define HSE_VALUE ((uint32_t)8000000)
90 #endif /* HSE_VALUE */
91 
96 #if !defined (HSE_STARTUP_TIMEOUT)
97  #define HSE_STARTUP_TIMEOUT ((uint32_t)5000)
98 #endif /* HSE_STARTUP_TIMEOUT */
99 
105 #if !defined (HSI_VALUE)
106  #define HSI_VALUE ((uint32_t)8000000)
107 #endif /* HSI_VALUE */
108 
113 #if !defined (HSI_STARTUP_TIMEOUT)
114  #define HSI_STARTUP_TIMEOUT ((uint32_t)5000)
115 #endif /* HSI_STARTUP_TIMEOUT */
116 
120 #if !defined (HSI14_VALUE)
121 #define HSI14_VALUE ((uint32_t)14000000)
124 #endif /* HSI14_VALUE */
125 
129 #if !defined (HSI48_VALUE)
130 #define HSI48_VALUE ((uint32_t)48000000)
133 #endif /* HSI48_VALUE */
134 
138 #if !defined (LSI_VALUE)
139  #define LSI_VALUE ((uint32_t)40000)
140 #endif /* LSI_VALUE */
146 #if !defined (LSE_VALUE)
147  #define LSE_VALUE ((uint32_t)32768)
148 #endif /* LSE_VALUE */
149 
150 /* Tip: To avoid modifying this file each time you need to use different HSE,
151  === you can define the HSE value in your toolchain compiler preprocessor. */
152 
153 /* ########################### System Configuration ######################### */
157 #define VDD_VALUE ((uint32_t)3300)
158 #define TICK_INT_PRIORITY ((uint32_t)2)
159  /* Warning: Must be set to higher priority for HAL_Delay() */
160  /* and HAL_GetTick() usage under interrupt context */
161 #define USE_RTOS 0
162 #define PREFETCH_ENABLE 1
163 #define INSTRUCTION_CACHE_ENABLE 0
164 #define DATA_CACHE_ENABLE 0
165 /* ########################## Assert Selection ############################## */
170 /* #define USE_FULL_ASSERT 1 */
171 
172 /* Includes ------------------------------------------------------------------*/
177 #ifdef HAL_RCC_MODULE_ENABLED
178  #include "stm32f0xx_hal_rcc.h"
179 #endif /* HAL_RCC_MODULE_ENABLED */
180 
181 #ifdef HAL_GPIO_MODULE_ENABLED
182  #include "stm32f0xx_hal_gpio.h"
183 #endif /* HAL_GPIO_MODULE_ENABLED */
184 
185 #ifdef HAL_DMA_MODULE_ENABLED
186  #include "stm32f0xx_hal_dma.h"
187 #endif /* HAL_DMA_MODULE_ENABLED */
188 
189 #ifdef HAL_CORTEX_MODULE_ENABLED
190  #include "stm32f0xx_hal_cortex.h"
191 #endif /* HAL_CORTEX_MODULE_ENABLED */
192 
193 #ifdef HAL_ADC_MODULE_ENABLED
194  #include "stm32f0xx_hal_adc.h"
195 #endif /* HAL_ADC_MODULE_ENABLED */
196 
197 #ifdef HAL_CAN_MODULE_ENABLED
198  #include "stm32f0xx_hal_can.h"
199 #endif /* HAL_CAN_MODULE_ENABLED */
200 
201 #ifdef HAL_CEC_MODULE_ENABLED
202  #include "stm32f0xx_hal_cec.h"
203 #endif /* HAL_CEC_MODULE_ENABLED */
204 
205 #ifdef HAL_COMP_MODULE_ENABLED
206  #include "stm32f0xx_hal_comp.h"
207 #endif /* HAL_COMP_MODULE_ENABLED */
208 
209 #ifdef HAL_CRC_MODULE_ENABLED
210  #include "stm32f0xx_hal_crc.h"
211 #endif /* HAL_CRC_MODULE_ENABLED */
212 
213 #ifdef HAL_DAC_MODULE_ENABLED
214  #include "stm32f0xx_hal_dac.h"
215 #endif /* HAL_DAC_MODULE_ENABLED */
216 
217 #ifdef HAL_FLASH_MODULE_ENABLED
218  #include "stm32f0xx_hal_flash.h"
219 #endif /* HAL_FLASH_MODULE_ENABLED */
220 
221 #ifdef HAL_I2C_MODULE_ENABLED
222  #include "stm32f0xx_hal_i2c.h"
223 #endif /* HAL_I2C_MODULE_ENABLED */
224 
225 #ifdef HAL_I2S_MODULE_ENABLED
226  #include "stm32f0xx_hal_i2s.h"
227 #endif /* HAL_I2S_MODULE_ENABLED */
228 
229 #ifdef HAL_IRDA_MODULE_ENABLED
230  #include "stm32f0xx_hal_irda.h"
231 #endif /* HAL_IRDA_MODULE_ENABLED */
232 
233 #ifdef HAL_IWDG_MODULE_ENABLED
234  #include "stm32f0xx_hal_iwdg.h"
235 #endif /* HAL_IWDG_MODULE_ENABLED */
236 
237 #ifdef HAL_PCD_MODULE_ENABLED
238  #include "stm32f0xx_hal_pcd.h"
239 #endif /* HAL_PCD_MODULE_ENABLED */
240 
241 #ifdef HAL_PWR_MODULE_ENABLED
242  #include "stm32f0xx_hal_pwr.h"
243 #endif /* HAL_PWR_MODULE_ENABLED */
244 
245 #ifdef HAL_RTC_MODULE_ENABLED
246  #include "stm32f0xx_hal_rtc.h"
247 #endif /* HAL_RTC_MODULE_ENABLED */
248 
249 #ifdef HAL_SMARTCARD_MODULE_ENABLED
250  #include "stm32f0xx_hal_smartcard.h"
251 #endif /* HAL_SMARTCARD_MODULE_ENABLED */
252 
253 #ifdef HAL_SMBUS_MODULE_ENABLED
254  #include "stm32f0xx_hal_smbus.h"
255 #endif /* HAL_SMBUS_MODULE_ENABLED */
256 
257 #ifdef HAL_SPI_MODULE_ENABLED
258  #include "stm32f0xx_hal_spi.h"
259 #endif /* HAL_SPI_MODULE_ENABLED */
260 
261 #ifdef HAL_TIM_MODULE_ENABLED
262  #include "stm32f0xx_hal_tim.h"
263 #endif /* HAL_TIM_MODULE_ENABLED */
264 
265 #ifdef HAL_TSC_MODULE_ENABLED
266  #include "stm32f0xx_hal_tsc.h"
267 #endif /* HAL_TSC_MODULE_ENABLED */
268 
269 #ifdef HAL_UART_MODULE_ENABLED
270  #include "stm32f0xx_hal_uart.h"
271 #endif /* HAL_UART_MODULE_ENABLED */
272 
273 #ifdef HAL_USART_MODULE_ENABLED
274  #include "stm32f0xx_hal_usart.h"
275 #endif /* HAL_USART_MODULE_ENABLED */
276 
277 #ifdef HAL_WWDG_MODULE_ENABLED
278  #include "stm32f0xx_hal_wwdg.h"
279 #endif /* HAL_WWDG_MODULE_ENABLED */
280 
281 /* Exported macro ------------------------------------------------------------*/
282 #ifdef USE_FULL_ASSERT
283 
291  #define assert_param(expr) ((expr) ? (void)0 : assert_failed((uint8_t *)__FILE__, __LINE__))
292 /* Exported functions ------------------------------------------------------- */
293  void assert_failed(uint8_t* file, uint32_t line);
294 #else
295  #define assert_param(expr) ((void)0)
296 #endif /* USE_FULL_ASSERT */
297 
298 #ifdef __cplusplus
299 }
300 #endif
301 
302 #endif /* __STM32F0xx_HAL_CONF_H */
303 
304 /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
Generated on Fri Sep 11 2015 16:47:21 for X-CUBE-SPN7 for X-NUCLEO-IHM07M1 by   doxygen 1.8.9.1
previous page start next page