FractureTools::SliceParameters Struct Reference

#include <FractureToolsStructs.h>

List of all members.

Public Types
enum	Order {   XYZ,   YZX,   ZXY,   ZYX,   YXZ,   XZY,   Through }
Public Member Functions
	SliceParameters ()
void	setToDefault ()
Public Attributes
unsigned	order
unsigned	splitsPerPass [3]
float	linearVariation [3]
float	angularVariation [3]
NoiseParameters	noise [3]

---

Detailed Description

SliceParameters

The slicing parameters for X, Y, and Z slicing of a mesh.

---

Member Enumeration Documentation

enum FractureTools::SliceParameters::Order

Which axis order to slice the mesh. This only matters if there is randomness in the slice surface.

---

Constructor & Destructor Documentation

FractureTools::SliceParameters::SliceParameters

(

)

[inline]

Constructor sets defaults

---

Member Function Documentation

void FractureTools::SliceParameters::setToDefault

(

)

[inline]

Sets all NoiseParameters to their defaults: order = XYZ; splitsPerPass[0] = splitsPerPass[1] = splitsPerPass[2] = 1; linearVariation[0] = linearVariation[1] = linearVariation[2] = 0.1f; angularVariation[0] = angularVariation[1] = angularVariation[2] = 20.0f*3.1415927f/180.0f; noise[0].setToDefault(); noise[1].setToDefault(); noise[2].setToDefault();

---

Member Data Documentation

float FractureTools::SliceParameters::angularVariation[3]

Variation in the slice surface angle along each axis. 0 variation means the slice surfaces are axis-aligned. Otherwise, the surface normal will be varied randomly, with angle to the axis somewhere within the given variation (in radians).

float FractureTools::SliceParameters::linearVariation[3]

Variation in slice position along each axis. This is a relative quantity. linearVariation[axis] = 0 means the slicing offsets are evenly spaced across the mesh along the axis. linearVariation[axis] = 1 means the slicing offsets are randomly chosen in a range of width 1/(splitsPerPass[axis]+1) times the width of the mesh along the axis.

NoiseParameters FractureTools::SliceParameters::noise[3]

The noise for each slicing direction

unsigned FractureTools::SliceParameters::order

The slicing order (see the Order enum)

unsigned FractureTools::SliceParameters::splitsPerPass[3]

How many times to slice along each axis

---

The documentation for this struct was generated from the following file:

• FractureToolsStructs.h