| Error Code | Status Name | Description |
| -1074397183 | IMG_ERR_NCAP | NI-IMAQ cannot perform the requested operation. |
| -1074397182 | IMG_ERR_OVRN | Too many interfaces open. |
| -1074397181 | IMG_ERR_EMEM | Not enough memory to perform the operation. |
| -1074397180 | IMG_ERR_OSER | Operating system error occurred. |
| -1074397179 | IMG_ERR_PAR1 | Function-specific; see function description. |
| -1074397178 | IMG_ERR_PAR2 | Function-specific; see function description. |
| -1074397177 | IMG_ERR_PAR3 | Function-specific; see function description. |
| -1074397176 | IMG_ERR_PAR4 | Function-specific; see function description. |
| -1074397175 | IMG_ERR_PAR5 | Function-specific; see function description. |
| -1074397174 | IMG_ERR_PAR6 | Function-specific; see function description. |
| -1074397173 | IMG_ERR_PAR7 | Function-specific; see function description. |
| -1074397172 | IMG_ERR_MXBF | Too many buffers already allocated. |
| -1074397171 | IMG_ERR_DLLE | DLL internal error; bad logic state. |
| -1074397170 | IMG_ERR_BSIZ | Buffer size used is too small for minimum acquisition frame. |
| -1074397169 | IMG_ERR_MXBI | Exhausted buffer IDs. |
| -1074397168 | IMG_ERR_ELCK | Operating system unable to lock the requested amount of memory. |
| -1074397167 | IMG_ERR_DISE | Error releasing the image buffer. |
| -1074397166 | IMG_ERR_BBUF | Bad buffer pointer in list. |
| -1074397165 | IMG_ERR_NLCK | Buffer list is not locked for this acquisition. |
| -1074397164 | IMG_ERR_NCAM | No camera defined for this channel. |
| -1074397163 | IMG_ERR_BINT | The passed in interface or session is invalid. |
| -1074397162 | IMG_ERR_BROW | The bytes per row value is less than region of interest. |
| -1074397161 | IMG_ERR_BROI | Region of interest is larger than the acquisition area. |
| -1074397160 | IMG_ERR_BCMF | Camera file is missing or corrupted. |
| -1074397159 | IMG_ERR_NVBL | The hardware is incapable of performing the requested action. |
| -1074397158 | IMG_ERR_NCFG | No buffers configured for session. |
| -1074397157 | IMG_ERR_BBLF | Buffer list does not contain a valid final command. |
| -1074397156 | IMG_ERR_BBLE | Buffer list contains an invalid command. |
| -1074397155 | IMG_ERR_BBLB | One or more of the buffers in the buffer list is not configured. |
| -1074397154 | IMG_ERR_NAIP | No acquisition in progress. |
| -1074397153 | IMG_ERR_VLCK | Cannot detect recognizable video source. |
| -1074397152 | IMG_ERR_BDMA | Bad DMA transfer. |
| -1074397151 | IMG_ERR_AIOP | Cannot perform request; acquisition currently in progress. |
| -1074397150 | IMG_ERR_TIMO | A timeout error occurred while waiting for the specified event. If waiting for an image, verify that all video data is acquired within the timeout period. If waiting for a signal, verify that the signal assertion occurs within the timeout period. |
| -1074397149 | IMG_ERR_NBUF | No buffers available; too early in acquisition. |
| -1074397148 | IMG_ERR_ZBUF | The buffer has a size of zero. |
| -1074397147 | IMG_ERR_HLPR | Parameter value set lower than valid range. |
| -1074397146 | IMG_ERR_BTRG | Trigger loopback problem; cannot drive with action enabled. |
| -1074397145 | IMG_ERR_NINF | No interface found. |
| -1074397144 | IMG_ERR_NDLL | Unable to load DLL. |
| -1074397143 | IMG_ERR_NFNC | Unable to find API function in DLL. |
| -1074397142 | IMG_ERR_NOSR | Unable to allocate system resources. |
| -1074397141 | IMG_ERR_BTAC | No trigger action; acquisition will time out. |
| -1074397140 | IMG_ERR_FIFO | FIFO overflow caused acquisition to halt. |
| -1074397139 | IMG_ERR_MLCK | Operating system denied request to lock down memory. |
| -1074397138 | IMG_ERR_ILCK | Interface locked. |
| -1074397137 | IMG_ERR_NEPK | No pixel clock detected from camera. |
| -1074397136 | IMG_ERR_SCLM | Field scaling mode not supported. |
| -1074397135 | IMG_ERR_SCC1 | Channel not set to 1 when using StillColor RGB acquisition. |
| -1074397134 | IMG_ERR_SMALLALLOC | Error during small buffer allocation. |
| -1074397133 | IMG_ERR_ALLOC | Error during large buffer allocation. |
| -1074397132 | IMG_ERR_BADCAMTYPE | This camera type is not supported by this hardware. |
| -1074397131 | IMG_ERR_BADPIXTYPE | Camera not supported; must be an 8-bit camera. |
| -1074397130 | IMG_ERR_BADCAMPARAM | Bad camera parameter in configuration file. |
| -1074397129 | IMG_ERR_PALKEYDTCT | Unable to recognize color component in PAL signal. |
| -1074397128 | IMG_ERR_BFRQ | Bad clock frequency. |
| -1074397127 | IMG_ERR_BITP | Bad interface type. |
| -1074397126 | IMG_ERR_HWNC | Hardware not capable of supporting this operation. |
| -1074397125 | IMG_ERR_SERIAL | Serial port error. |
| -1074397124 | IMG_ERR_MXPI | No more pulse IDs are available. Dispose of an existing pulse first. |
| -1074397123 | IMG_ERR_BPID | Bad pulse ID. |
| -1074397122 | IMG_ERR_NEVR | DLL internal error; bad logic state. |
| -1074397121 | IMG_ERR_SERIAL_TIMO | Unable to perform the requested serial operation within the timeout period. |
| -1074397120 | IMG_ERR_PG_TOO_MANY | Too many pattern generation transitions defined. |
| -1074397119 | IMG_ERR_PG_BAD_TRANS | Bad pattern generation transition time. |
| -1074397118 | IMG_ERR_PLNS | Pulse not started. |
| -1074397117 | IMG_ERR_BPMD | Bad pulse mode. |
| -1074397116 | IMG_ERR_NSAT | This attribute cannot be set. |
| -1074397115 | IMG_ERR_HYBRID | Cannot mix system and onboard memory buffers. |
| -1074397114 | IMG_ERR_BADFILFMT | Pixel depth not supported with this file format. |
| -1074397113 | IMG_ERR_BADFILEXT | File extension is not supported. |
| -1074397112 | IMG_ERR_NRTSI | Too many RTSI triggers mapped; you can use only four RTSI lines at once. |
| -1074397111 | IMG_ERR_MXTRG | Exhausted trigger resources. |
| -1074397110 | IMG_ERR_MXRC | Exhausted resources. |
| -1074397109 | IMG_ERR_OOR | Parameter out of range. |
| -1074397108 | IMG_ERR_NPROG | FPGA not programmed. |
| -1074397107 | IMG_ERR_NEOM | Not enough onboard memory to perform the operation. |
| -1074397106 | IMG_ERR_BDTYPE | Bad display type; buffer cannot be displayed with imgPlot. |
| -1074397105 | IMG_ERR_THRDACCDEN | Thread denied access to function. |
| -1074397104 | IMG_ERR_BADFILWRT | Could not write the file. |
| -1074397103 | IMG_ERR_AEXM | This buffer is currently protected. Release it to allow new data to be written. |
| -1074397102 | IMG_ERR_BAD_LUT_TYPE | The LUT type is invalid. |
| -1074397101 | IMG_ERR_ATTRIBUTE_NOT_READABLE | The selected attribute is not readable. |
| -1074397100 | IMG_ERR_BOARD_NOT_SUPPORTED | This version of NI-IMAQ does not support this device. |
| -1074397099 | IMG_ERR_BAD_FRAME_FIELD | The value of IMG_ATTR_FRAME_FIELD is invalid. |
| -1074397098 | IMG_ERR_INVALID_ATTRIBUTE | The requested attribute is invalid. |
| -1074397097 | IMG_ERR_BAD_LINE_MAP | The physical data lines are incorrectly mapped to bit values. |
| -1074397095 | IMG_ERR_BAD_CHANNEL | The requested channel is invalid for this device. |
| -1074397094 | IMG_ERR_BAD_CHROMA_FILTER | The value of IMG_ATTR_CHROMA_FILTER is invalid. |
| -1074397093 | IMG_ERR_BAD_SCALE | The value of IMG_ATTR_HSCALE or IMG_ATTR_VSCALE is invalid. |
| -1074397091 | IMG_ERR_BAD_TRIGGER_MODE | The requested triggering mode is invalid. |
| -1074397090 | IMG_ERR_BAD_CLAMP_START | The clamp start value is invalid. |
| -1074397089 | IMG_ERR_BAD_CLAMP_STOP | The requested clamp stop value is invalid. |
| -1074397088 | IMG_ERR_BAD_BRIGHTNESS | The requested brightness level is out of range. |
| -1074397087 | IMG_ERR_BAD_CONTRAST | The requested contrast level is out of range. |
| -1074397086 | IMG_ERR_BAD_SATURATION | The requested saturation level is out of range. |
| -1074397085 | IMG_ERR_BAD_TINT | The requested tint level is out of range. |
| -1074397084 | IMG_ERR_BAD_HUE_OFF_ANGLE | The requested hue offset angle is out of range. |
| -1074397083 | IMG_ERR_BAD_ACQUIRE_FIELD | The field requested to be acquired is invalid. |
| -1074397082 | IMG_ERR_BAD_LUMA_BANDWIDTH | The requested luma bandwidth value is invalid. |
| -1074397081 | IMG_ERR_BAD_LUMA_COMB | The requested luma comb setting is invalid. |
| -1074397080 | IMG_ERR_BAD_CHROMA_PROCESS | The requested chroma processing value is invalid. |
| -1074397079 | IMG_ERR_BAD_CHROMA_BANDWIDTH | The requested chroma bandwidth value is invalid. |
| -1074397078 | IMG_ERR_BAD_CHROMA_COMB | The requested chroma comb setting value is invalid. |
| -1074397077 | IMG_ERR_BAD_RGB_CORING | The requested minimum level of saturation (coring) for the RGB color space is invalid. |
| -1074397076 | IMG_ERR_BAD_HUE_REPLACE_VALUE | The requested HSL hue replacement value is out of range. |
| -1074397075 | IMG_ERR_BAD_RED_GAIN | The requested red gain value is out of range. |
| -1074397074 | IMG_ERR_BAD_GREEN_GAIN | The requested green gain value is out of range. |
| -1074397073 | IMG_ERR_BAD_BLUE_GAIN | The requested blue gain value is out of range. |
| -1074397072 | IMG_ERR_BAD_START_FIELD | The requested start field value is invalid. |
| -1074397071 | IMG_ERR_BAD_TAP_DIRECTION | The direction of the tap scan is invalid. |
| -1074397070 | IMG_ERR_BAD_MAX_IMAGE_RECT | The maximum image rectangle value is invalid. |
| -1074397069 | IMG_ERR_BAD_TAP_TYPE | The tap configuration is invalid. |
| -1074397068 | IMG_ERR_BAD_SYNC_RECT | The synchronization rectangle is invalid. |
| -1074397067 | IMG_ERR_BAD_ACQWINDOW_RECT | The requested acquisition window is invalid. |
| -1074397066 | IMG_ERR_BAD_HSL_CORING | The requested minimum level of saturation (coring) for the HSL color space is out of range. |
| -1074397065 | IMG_ERR_BAD_TAP_0_VALID_RECT | The rectangle defined for Tap 0 is invalid. |
| -1074397064 | IMG_ERR_BAD_TAP_1_VALID_RECT | The rectangle defined for Tap 1 is invalid. |
| -1074397063 | IMG_ERR_BAD_TAP_2_VALID_RECT | The rectangle defined for Tap 2 is invalid. |
| -1074397062 | IMG_ERR_BAD_TAP_3_VALID_RECT | The rectangle defined for Tap 3 is invalid. |
| -1074397061 | IMG_ERR_BAD_TAP_RECT | The tap rectangle is invalid. |
| -1074397060 | IMG_ERR_BAD_NUM_TAPS | The number of taps is invalid. |
| -1074397059 | IMG_ERR_BAD_TAP_NUM | The tap number is invalid. |
| -1074397058 | IMG_ERR_BAD_QUAD_NUM | The scarab quadrant number is invalid. |
| -1074397057 | IMG_ERR_BAD_NUM_DATA_LINES | The number of data lines requested is invalid for this image acquisition device. |
| -1074397056 | IMG_ERR_BAD_BITS_PER_COMPONENT | The bits-per-component value is invalid. |
| -1074397055 | IMG_ERR_BAD_NUM_COMPONENTS | The number of components value is invalid. |
| -1074397054 | IMG_ERR_BAD_BIN_THRESHOLD_LOW | The requested lower binary threshold value is out of range. |
| -1074397053 | IMG_ERR_BAD_BIN_THRESHOLD_HIGH | The requested upper binary threshold value is out of range. |
| -1074397052 | IMG_ERR_BAD_BLACK_REF_VOLT | The requested black reference voltage value is out of range. |
| -1074397051 | IMG_ERR_BAD_WHITE_REF_VOLT | The requested white reference voltage value is out of range. |
| -1074397050 | IMG_ERR_BAD_FREQ_STD | The video standard frequency value selected for the 6431 chip is invalid. |
| -1074397049 | IMG_ERR_BAD_HDELAY | The HDELAY value is out of range. |
| -1074397048 | IMG_ERR_BAD_LOCK_SPEED | The setting for lock speed is invalid. |
| -1074397047 | IMG_ERR_BAD_BUFFER_LIST | The buffer list is invalid. |
| -1074397046 | IMG_ERR_BOARD_NOT_INITIALIZED | The image aquisition device is not yet initialized. |
| -1074397045 | IMG_ERR_BAD_PCLK_SOURCE | The requested pixel clock source is invalid for this image acquisition device. |
| -1074397044 | IMG_ERR_BAD_VIDEO_LOCK_CHANNEL | The selected video timing signal source is invalid for this image acquisition device. |
| -1074397043 | IMG_ERR_BAD_LOCK_SEL | The selected lock mode is invalid. |
| -1074397042 | IMG_ERR_BAD_BAUD_RATE | The selected baud rate is invalid for this image acquisition device. |
| -1074397041 | IMG_ERR_BAD_STOP_BITS | The requested serial stop bits setting is invalid for this image acquisition device. |
| -1074397040 | IMG_ERR_BAD_DATA_BITS | The requested serial data bits setting is invalid for this image acquisition device. |
| -1074397039 | IMG_ERR_BAD_PARITY | The requested serial parity setting is invalid for this image acquisition device. |
| -1074397038 | IMG_ERR_TERM_STRING_NOT_FOUND | The requested serial termination string was not found in the returned buffer. |
| -1074397037 | IMG_ERR_SERIAL_READ_TIMEOUT | The serial read did not complete within the specified timeout period. |
| -1074397036 | IMG_ERR_SERIAL_WRITE_TIMEOUT | The serial write operation could not execute within the specified timeout period. |
| -1074397035 | IMG_ERR_BAD_SYNCHRONICITY | The async setting in imgSessionAcquire is invalid. |
| -1074397034 | IMG_ERR_BAD_INTERLACING_CONFIG | This tap configuration cannot be interlaced. |
| -1074397032 | IMG_ERR_BAD_CHIP_CODE | The requested chip code is invalid. Could not find a matching chip. |
| -1074397031 | IMG_ERR_LUT_NOT_PRESENT | The LUT chip does not exist on this image acquisition device. |
| -1074397030 | IMG_ERR_DSPFILTER_NOT_PRESENT | The DSP filter does not exist on this image acquisition device. |
| -1074397029 | IMG_ERR_DEVICE_NOT_FOUND | The image acquisition device was not found. |
| -1074397028 | IMG_ERR_ONBOARD_MEM_CONFIG | An error occurred during onboard memory configuration. |
| -1074397027 | IMG_ERR_BAD_POINTER | The pointer provided is either NULL when it should not be, or is non-NULL when it should be NULL. |
| -1074397026 | IMG_ERR_BAD_BUFFER_LIST_INDEX | The requested buffer list index is invalid. |
| -1074397025 | IMG_ERR_INVALID_BUFFER_ATTRIBUTE | The requested buffer attribute is invalid. |
| -1074397024 | IMG_ERR_INVALID_BUFFER_PTR | The requested buffer was not created by the NI-IMAQ driver software. |
| -1074397023 | IMG_ERR_BUFFER_LIST_ALREADY_LOCKED | This image acquisition device already has a buffer list locked down in memory. |
| -1074397022 | IMG_ERR_BAD_DEVICE_TYPE | The type of image acquisition device requested is invalid. |
| -1074397021 | IMG_ERR_BAD_BAR_SIZE | The size of one or more Base Address Register windows is incorrect. |
| -1074397019 | IMG_ERR_NO_VALID_COUNTER_RECT | The selected region of interest is not valid for the camera tap configuration. |
| -1074397018 | IMG_ERR_ACQ_STOPPED | The wait terminated because the acquisition stopped. |
| -1074397017 | IMG_ERR_BAD_TRIGGER_ACTION | The requested trigger action is invalid. |
| -1074397016 | IMG_ERR_BAD_TRIGGER_POLARITY | The trigger polarity is invalid. |
| -1074397015 | IMG_ERR_BAD_TRIGGER_NUMBER | The requested trigger line is invalid. Please verify that this trigger line exists and is properly connected to your device. |
| -1074397014 | IMG_ERR_BUFFER_NOT_AVAILABLE | The requested buffer has been overwritten and is no longer available. |
| -1074397012 | IMG_ERR_BAD_PULSE_ID | The pulse ID is invalid. |
| -1074397011 | IMG_ERR_BAD_PULSE_TIMEBASE | The requested timebase for the pulse is invalid. |
| -1074397010 | IMG_ERR_BAD_PULSE_GATE | The gate signal for the pulse is invalid. |
| -1074397009 | IMG_ERR_BAD_PULSE_GATE_POLARITY | The polarity of the pulse gate signal is invalid. |
| -1074397008 | IMG_ERR_BAD_PULSE_OUTPUT | The output signal for the pulse is invalid. |
| -1074397007 | IMG_ERR_BAD_PULSE_OUTPUT_POLARITY | The requested polarity of the pulse output signal is invalid. |
| -1074397006 | IMG_ERR_BAD_PULSE_MODE | The requested pulse mode is invalid. |
| -1074397005 | IMG_ERR_NOT_ENOUGH_RESOURCES | There are not enough system resources to complete the requested option. |
| -1074397004 | IMG_ERR_INVALID_RESOURCE | The requested resource is invalid. |
| -1074397003 | IMG_ERR_BAD_FVAL_ENABLE | The selected FVAL enable mode is invalid. |
| -1074397002 | IMG_ERR_BAD_WRITE_ENABLE_MODE | The specified combination of enable lines is invalid. |
| -1074397001 | IMG_ERR_COMPONENT_MISMATCH | Internal Error: The installed components of the NI-IMAQ driver software are incompatible. Reinstall NI-IMAQ. |
| -1074397000 | IMG_ERR_FPGA_PROGRAMMING_FAILED | Internal Error: The attempt to download the program to an FPGA was unsuccessful. |
| -1074396999 | IMG_ERR_CONTROL_FPGA_FAILED | Internal Error: The control FPGA did not initialize properly. |
| -1074396998 | IMG_ERR_CHIP_NOT_READABLE | Internal Error: Attempted to read a write-only chip. |
| -1074396997 | IMG_ERR_CHIP_NOT_WRITABLE | Internal Error: Attempted to write to a read-only chip. |
| -1074396996 | IMG_ERR_I2C_BUS_FAILED | Internal Error: The I2C bus did not respond correctly. |
| -1074396995 | IMG_ERR_DEVICE_IN_USE | The requested image acquisition device is already in use. |
| -1074396994 | IMG_ERR_BAD_TAP_DATALANES | The requested data lanes on a particular tap are invalid. |
| -1074396993 | IMG_ERR_BAD_VIDEO_GAIN | The requested video gain value is out of range. |
| -1074396992 | IMG_ERR_VHA_MODE_NOT_ALLOWED | The current device configuration does not allow VHA mode. |
| -1074396991 | IMG_ERR_BAD_TRACKING_SPEED | The color video tracking speed is invalid. |
| -1074396990 | IMG_ERR_BAD_COLOR_INPUT_SELECT | The selected input connector is not valid. |
| -1074396989 | IMG_ERR_BAD_HAV_OFFSET | The offset value for the Horizontal Active Video color decoder setting is invalid. |
| -1074396988 | IMG_ERR_BAD_HS1_OFFSET | The Horizontal Sync 1offset value for the color decoder is invalid. |
| -1074396987 | IMG_ERR_BAD_HS2_OFFSET | The Horizontal Sync 2 offset value for the color decoder is invalid. |
| -1074396986 | IMG_ERR_BAD_IF_CHROMA | The chroma IF compensation setting is invalid. |
| -1074396985 | IMG_ERR_BAD_COLOR_OUTPUT_FORMAT | The color output format is invalid. |
| -1074396984 | IMG_ERR_BAD_SAMSUNG_SCHCMP | The phase constant specified for the color decoder is invalid. |
| -1074396983 | IMG_ERR_BAD_SAMSUNG_CDLY | The chroma path group delay setting is invalid. |
| -1074396982 | IMG_ERR_BAD_SECAM_DETECT | The SECAM detection method is invalid. |
| -1074396981 | IMG_ERR_BAD_FSC_DETECT | The FSC detection method is invalid. |
| -1074396980 | IMG_ERR_BAD_SAMSUNG_CFTC | The chroma frequency tracking time constant is invalid. |
| -1074396979 | IMG_ERR_BAD_SAMSUNG_CGTC | The chroma gain tracking time constant setting is invalid. |
| -1074396978 | IMG_ERR_BAD_SAMSUNG_SAMPLE_RATE | The pixel sampling rate is invalid. |
| -1074396977 | IMG_ERR_BAD_SAMSUNG_VSYNC_EDGE | The requested VSYNC edge to synchronize with is invalid. |
| -1074396976 | IMG_ERR_SAMSUNG_LUMA_GAIN_CTRL | The method used to control the gain setting for luminance is invalid. |
| -1074396975 | IMG_ERR_BAD_SET_COMB_COEF | The chrominance comb coefficients setting is invalid. |
| -1074396974 | IMG_ERR_SAMSUNG_CHROMA_TRACK | The method used to track chrominance is invalid. |
| -1074396973 | IMG_ERR_SAMSUNG_DROP_LINES | The algorithm for dropping video lines is invalid. |
| -1074396972 | IMG_ERR_VHA_OPTIMIZATION_NOT_ALLOWED | VHA optimization is not applicable for the current configuration. |
| -1074396971 | IMG_ERR_BAD_PG_TRANSITION | A pattern generation is invalid. |
| -1074396970 | IMG_ERR_TOO_MANY_PG_TRANSITIONS | The number of pattern generation transitions exceeds the maximum allowed for the selected image acquisition device. |
| -1074396969 | IMG_ERR_BAD_CL_DATA_CONFIG | The data configuration for the channel link chip is invalid. |
| -1074396968 | IMG_ERR_BAD_OCCURRENCE | The requested occurrence is invalid. |
| -1074396967 | IMG_ERR_BAD_PG_MODE | The pattern generation mode is invalid. |
| -1074396966 | IMG_ERR_BAD_PG_SOURCE | The pattern generation source signal is invalid. |
| -1074396965 | IMG_ERR_BAD_PG_GATE | The pattern generation gate signal is invalid. |
| -1074396964 | IMG_ERR_BAD_PG_GATE_POLARITY | The pattern generation gate polarity is invalid. |
| -1074396963 | IMG_ERR_BAD_PG_WAVEFORM_INITIAL_STATE | The initial state for the pattern generation waveform is invalid. |
| -1074396962 | IMG_ERR_INVALID_CAMERA_ATTRIBUTE | The requested camera attribute is invalid. |
| -1074396961 | IMG_ERR_BOARD_CLOSED | The request failed because the device is closed. |
| -1074396960 | IMG_ERR_FILE_NOT_FOUND | The requested file could not be found. |
| -1074396959 | IMG_ERR_BAD_1409_DSP_FILE | The dspfilter1409.bin file is corrupt or missing. |
| -1074396958 | IMG_ERR_BAD_SCARABXCV200_32_FILE | The scarabXCV200.bin file is corrupt or missing. |
| -1074396957 | IMG_ERR_BAD_SCARABXCV200_16_FILE | The scarab16bit.bin file is corrupt or missing. |
| -1074396956 | IMG_ERR_BAD_CAMERA_LINK_FILE | The Camera Link FPGA bin file is corrupt or missing. |
| -1074396955 | IMG_ERR_BAD_1411_CSC_FILE | The colorspace.bin file is corrupt or missing. |
| -1074396954 | IMG_ERR_BAD_ERROR_CODE | The error code passed into imgShowError is unknown. |
| -1074396953 | IMG_ERR_DRIVER_TOO_OLD | The image acquisition device requires a newer version of the NI-IMAQ driver software. |
| -1074396952 | IMG_ERR_INSTALLATION_CORRUPT | The NI-IMAQ driver software installation is corrupt. |
| -1074396951 | IMG_ERR_NO_ONBOARD_MEMORY | NI-IMAQ cannot perform an onboard acquisition because there is no onboard memory. |
| -1074396950 | IMG_ERR_BAD_BAYER_PATTERN | The Bayer pattern specified is invalid. |
| -1074396949 | IMG_ERR_CANNOT_INITIALIZE_BOARD | The image acquisition device is not operating correctly and cannot be initialized. |
| -1074396948 | IMG_ERR_CALIBRATION_DATA_CORRUPT | The stored calibration data has been corrupted. |
| -1074396947 | IMG_ERR_DRIVER_FAULT | NI-IMAQ attempted to perform an illegal operation. |
| -1074396946 | IMG_ERR_ADDRESS_OUT_OF_RANGE | NI-IMAQ attempted to access a chip beyond the applicable addressable range. |
| -1074396945 | IMG_ERR_ONBOARD_ACQUISITION | The requested operation is not valid for onboard acquisitions. |
| -1074396944 | IMG_ERR_NOT_AN_ONBOARD_ACQUISITION | The requested operation is valid only for onboard acquisitions. |
| -1074396943 | IMG_ERR_BOARD_ALREADY_INITIALIZED | NI-IMAQ attempted to call an initialization function on an image acquisition device that was already initialized. |
| -1074396942 | IMG_ERR_NO_SERIAL_PORT | The image acquisition device does not have a serial port. Serial functions are invalid. |
| -1074396941 | IMG_ERR_BAD_VENABLE_GATING_MODE | The VENABLE gating mode selection is invalid. |
| -1074396940 | IMG_ERR_BAD_1407_LUT_FILE | The lutfpga1407.bin file is corrupt or missing. |
| -1074396939 | IMG_ERR_BAD_SYNC_DETECT_LEVEL | The synchronization signal detection level is out of range. |
| -1074396938 | IMG_ERR_BAD_1405_GAIN_FILE | The gain1405.bin file is corrupt or missing. |
| -1074396937 | IMG_ERR_CLAMP_DAC_NOT_PRESENT | The image acquisition device does not have a clamp DAC. |
| -1074396936 | IMG_ERR_GAIN_DAC_NOT_PRESENT | The image acquisition device does not have a gain DAC. |
| -1074396935 | IMG_ERR_REF_DAC_NOT_PRESENT | The image acquisition device does not have a reference DAC. |
| -1074396934 | IMG_ERR_BAD_SCARABXC2S200_FILE | The scarabXC2S200.bin file is corrupt or missing. |
| -1074396933 | IMG_ERR_BAD_LUT_GAIN | The specified LUT gain is invalid. |
| -1074396932 | IMG_ERR_BAD_MAX_BUF_LIST_ITER | The requested number of buffer lists for an onboard acquisition is invalid. |
| -1074396931 | IMG_ERR_BAD_PG_LINE_NUM | The requested line number for pattern generation is invalid. |
| -1074396930 | IMG_ERR_BAD_BITS_PER_PIXEL | The requested number of bits per pixel is invalid. |
| -1074396929 | IMG_ERR_TRIGGER_ALARM | Triggers are coming in too fast to handle them and maintain system responsiveness. Check for noise on your trigger line. |
| -1074396928 | IMG_ERR_BAD_SCARABXC2S200_03052009_FILE | The scarabXC2S200_03052009.bin file is corrupt or missing. |
| -1074396927 | IMG_ERR_LUT_CONFIG | Internal Error: An error occurred while configuring the LUT. |
| -1074396926 | IMG_ERR_CONTROL_FPGA_REQUIRES_NEWER_DRIVER | A firmware update has been applied to the device. The image acquisition device requires a newer version of the NI-IMAQ driver software to work with the update. |
| -1074396925 | IMG_ERR_CONTROL_FPGA_PROGRAMMING_FAILED | An error occurred while updating the firmware on the device. |
| -1074396924 | IMG_ERR_BAD_TRIGGER_SIGNAL_LEVEL | The trigger line does not support the requested signaling level. |
| -1074396923 | IMG_ERR_CAMERA_FILE_REQUIRES_NEWER_DRIVER | This camera file requires a newer version of NI-IMAQ. |
| -1074396922 | IMG_ERR_DUPLICATED_BUFFER | An image cannot be placed in the same buffer list more than once. |
| -1074396921 | IMG_ERR_NO_ERROR | No error |
| -1074396920 | IMG_ERR_INTERFACE_NOT_SUPPORTED | The camera file does not support the current interface type. |
| -1074396919 | IMG_ERR_BAD_PCLK_POLARITY | The requested polarity for the pixel clock is invalid. |
| -1074396918 | IMG_ERR_BAD_ENABLE_POLARITY | The requested polarity for the enable line is invalid. |
| -1074396917 | IMG_ERR_BAD_PCLK_SIGNAL_LEVEL | The requested signaling level for the pixel clock is invalid. |
| -1074396916 | IMG_ERR_BAD_ENABLE_SIGNAL_LEVEL | The requested signaling level for the enable line is invalid. |
| -1074396915 | IMG_ERR_BAD_DATA_SIGNAL_LEVEL | The requested signaling level for the data lines is invalid. |
| -1074396914 | IMG_ERR_BAD_CTRL_SIGNAL_LEVEL | The requested signaling level for the control lines is invalid. |
| -1074396913 | IMG_ERR_BAD_WINDOW_HANDLE | The requested window handle is invalid. |
| -1074396912 | IMG_ERR_CANNOT_WRITE_FILE | Cannot open the requested file for writing. |
| -1074396911 | IMG_ERR_CANNOT_READ_FILE | Cannot open the requested file for reading. |
| -1074396910 | IMG_ERR_BAD_SIGNAL_TYPE | Cannot wait on the requested signal. |
| -1074396909 | IMG_ERR_BAD_SAMPLES_PER_LINE | The specified number of samples per line is invalid. |
| -1074396908 | IMG_ERR_BAD_SAMPLES_PER_LINE_REF | The specified reference value for samples per line is invalid. |
| -1074396907 | IMG_ERR_USE_EXTERNAL_HSYNC | The current video signal requires an external HSYNC to be used to lock the signal. |
| -1074396906 | IMG_ERR_BUFFER_NOT_ALIGNED | An image buffer is not properly aligned. All image buffers must be aligned to a 4-byte boundary. |
| -1074396905 | IMG_ERR_ROWPIXELS_TOO_SMALL | The number of pixels per row is less than the region of interest width. |
| -1074396904 | IMG_ERR_ROWPIXELS_NOT_ALIGNED | The number of pixels per row is not properly aligned. The total number of bytes per row must be aligned to a 4-byte boundary. |
| -1074396903 | IMG_ERR_ROI_WIDTH_NOT_ALIGNED | The ROI width is not properly aligned. The total number of bytes bounded by the ROI width must be aligned to a 4-byte boundary. |
| -1074396902 | IMG_ERR_LINESCAN_NOT_ALLOWED | Linescan mode is not valid for this tap configuration. |
| -1074396901 | IMG_ERR_INTERFACE_FILE_REQUIRES_NEWER_DRIVER | This interface file requires a newer version of NI-IMAQ. |
| -1074396900 | IMG_ERR_BAD_SKIP_COUNT | The requested skip count value is out of range. |
| -1074396899 | IMG_ERR_BAD_NUM_X_ZONES | The number of X zones in the tap configuration of the camera is invalid. |
| -1074396898 | IMG_ERR_BAD_NUM_Y_ZONES | The number of Y zones in the tap configuration of the camera is invalid. |
| -1074396897 | IMG_ERR_BAD_NUM_TAPS_PER_X_ZONE | The number of taps per X zone in the tap configuration of the camera is invalid. |
| -1074396896 | IMG_ERR_BAD_NUM_TAPS_PER_Y_ZONE | The number of taps per Y zone in the tap configuration of the camera is invalid. |
| -1074396895 | IMG_ERR_BAD_TEST_IMAGE_TYPE | The requested test image type is invalid. |
| -1074396894 | IMG_ERR_CANNOT_ACQUIRE_FROM_CAMERA | This firmware is not capable of acquiring from a camera. |
| -1074396893 | IMG_ERR_BAD_CTRL_LINE_SOURCE | The source for the camera control line is invalid. |
| -1074396892 | IMG_ERR_BAD_PIXEL_EXTRACTOR | The requested pixel extractor is invalid. |
| -1074396891 | IMG_ERR_BAD_NUM_TIME_SLOTS | The requested number of time slots is invalid. |
| -1074396890 | IMG_ERR_BAD_PLL_VCO_DIVIDER | The requested VCO divide down number is invalid. The only valid values are 2, 4, 8 and 16. |
| -1074396889 | IMG_ERR_CRITICAL_TEMP | The device temperature exceeded the critical temperature threshold. |
| -1074396888 | IMG_ERR_BAD_DPA_OFFSET | The requested dynamic phase aligner offset is invalid. |
| -1074396887 | IMG_ERR_BAD_NUM_POST_TRIGGER_BUFFERS | The requested number of post trigger buffers is invalid. |
| -1074396886 | IMG_ERR_BAD_DVAL_MODE | The requested DVAL mode is invalid. |
| -1074396885 | IMG_ERR_BAD_TRIG_GEN_REARM_SOURCE | The requested trigger generator rearm source signal is invalid. |
| -1074396884 | IMG_ERR_BAD_ASM_GATE_SOURCE | The requested ASM gate signal is invalid. |
| -1074396883 | IMG_ERR_TOO_MANY_BUFFERS | The requested number of buffer list buffers is not supported by this image acquisition device. |
| -1074396882 | IMG_ERR_BAD_TAP_4_VALID_RECT | The rectangle defined for Tap 4 is invalid. |
| -1074396881 | IMG_ERR_BAD_TAP_5_VALID_RECT | The rectangle defined for Tap 5 is invalid. |
| -1074396880 | IMG_ERR_BAD_TAP_6_VALID_RECT | The rectangle defined for Tap 6 is invalid. |
| -1074396879 | IMG_ERR_BAD_TAP_7_VALID_RECT | The rectangle defined for Tap 7 is invalid. |
| -1074396878 | IMG_ERR_FRONT_END_BANDWIDTH_EXCEEDED | The camera is providing image data faster than the image acquisition device can receive it. |
| -1074396877 | IMG_ERR_BAD_PORT_NUMBER | The requested port number does not exist. |
| -1074396876 | IMG_ERR_PORT_CONFIG_CONFLICT | The requested port cannot be cannot be configured due to a conflict with another port that is currently opened. |
| -1074396875 | IMG_ERR_BITSTREAM_INCOMPATIBLE | The requested bitstream is not compatible with the image acquisition device. |
| -1074396874 | IMG_ERR_SERIAL_PORT_IN_USE | The requested serial port is currently in use and is not accessible. |
| -1074396873 | IMG_ERR_BAD_ENCODER_DIVIDE_FACTOR | The requested encoder divide factor is invalid. |
| -1074396872 | IMG_ERR_ENCODER_NOT_SUPPORTED | Encoder support is not present for this image acquisition device. Please verify that this device is capable of handling encoder signals and that phase A and B are connected. |
| -1074396871 | IMG_ERR_BAD_ENCODER_POLARITY | The requested encoder phase signal polarity is invalid. |
| -1074396870 | IMG_ERR_BAD_ENCODER_FILTER | The requested encoder filter setting is invalid. |
| -1074396869 | IMG_ERR_ENCODER_POSITION_NOT_SUPPORTED | This image acquisition device does not support reading the absolute encoder position. |
| -1074396868 | IMG_ERR_IMAGE_IN_USE | The image appears to be in use. Please name the images differently to avoid this situation. |
| -1074396867 | IMG_ERR_BAD_SCARABXL4000_FILE | The scarab.bin file is corrupt or missing. |
| -1074396866 | IMG_ERR_BAD_CAMERA_ATTRIBUTE_VALUE | The requested camera attribute value is invalid. For numeric camera attributes, please ensure that the value is properly aligned and within the allowable range. |
| -1074396865 | IMG_ERR_BAD_PULSE_WIDTH | The requested pulse width is invalid. |
| -1074396864 | IMG_ERR_FPGA_FILE_NOT_FOUND | The requested FPGA bitstream file could not be found. |
| -1074396863 | IMG_ERR_FPGA_FILE_CORRUPT | The requested FPGA bitstream file is corrupt. |
| -1074396862 | IMG_ERR_BAD_PULSE_DELAY | The requested pulse delay is invalid. |
| -1074396861 | IMG_ERR_BAD_PG_IDLE_SIGNAL_LEVEL | The pattern generation (PG) idle state is invalid. Camera control lines sourced from the PG unit must be all tristate or all non-tristate. |
| -1074396860 | IMG_ERR_BAD_PG_WAVEFORM_IDLE_STATE | The idle state for the pattern generation waveform is invalid. |
| -1074396859 | IMG_ERR_64_BIT_MEMORY_NOT_SUPPORTED | This device only supports acquiring into the 32-bit address space; however, portions of the image buffer list reside outside of 32-bit physical memory. |
| -1074396858 | IMG_ERR_64_BIT_MEMORY_UPDATE_AVAILABLE | This 32-bit device is operating on a 64-bit OS with more than 3GB of physical memory. An update is available to allow acquisitions into 64-bit physical memory. Launch the updater from the menu in MAX: Tools»NI Vision»Update NI-IMAQ Device Firmware. |
| -1074396857 | IMG_ERR_32_BIT_MEMORY_LIMITATION | This 32-bit device is operating on a 64-bit OS with more than 3GB of physical memory. This configuration could allocate 64-bit memory which is unsupported by the device. To solve this problem, reduce the amount of physical memory in the system. |
| -1074396856 | IMG_ERR_KERNEL_NOT_LOADED | The kernel component of the driver, niimaqk.sys, is not loaded. Verify that an IMAQ device is in your system or reinstall the driver. |
| -1074396855 | IMG_ERR_BAD_SENSOR_SHUTTER_PERIOD | The sensor shutter period is invalid. Check the horizontal and vertical shutter period values. |
| -1074396854 | IMG_ERR_BAD_SENSOR_CCD_TYPE | The sensor CCD type is invalid. |
| -1074396853 | IMG_ERR_BAD_SENSOR_PARTIAL_SCAN | The sensor partial scan mode is invalid. |
| -1074396852 | IMG_ERR_BAD_SENSOR_BINNING | The sensor binning mode is invalid. |
| -1074396851 | IMG_ERR_BAD_SENSOR_GAIN | The sensor gain value is invalid. |
| -1074396850 | IMG_ERR_BAD_SENSOR_BRIGHTNESS | The sensor brightness value is invalid. |
| -1074396849 | IMG_ERR_BAD_LED_STATE | The LED state is invalid. |
| -1074396848 | IMG_ERR_64_BIT_NOT_SUPPORTED | The operation is not supported for 64-bit applications. |
| -1074396847 | IMG_ERR_BAD_TRIGGER_DELAY | The requested trigger delay value is not supported. |
| -1074396846 | IMG_ERR_LIGHTING_CURRENT_EXCEEDS_LIMITS | The configured lighting current level exceeds the hardware or user's configured limits. |
| -1074396845 | IMG_ERR_LIGHTING_INVALID_MODE | The configured lighting mode is invalid. |
| -1074396844 | IMG_ERR_LIGHTING_EXTERNAL_INVALID_MODE | The configured external lighting mode is invalid. |
| -1074396843 | IMG_ERR_BAD_SENSOR_EXPOSURE | The sensor exposure time is invalid. |
| -1074396842 | IMG_ERR_BAD_FRAME_RATE | The frame rate is invalid for the current configuration. |
| -1074396841 | IMG_ERR_BAD_SENSOR_PARTIAL_SCAN_BINNING_COMBINATION | The partial scan mode / binning mode combination is invalid. |
| -1074396840 | IMG_ERR_SOFTWARE_TRIGGER_NOT_CONFIGURED | The requested software trigger is not configured. |
| -1074396839 | IMG_ERR_FREE_RUN_MODE_NOT_ALLOWED | Free-run mode is not allowed in the current configuration. This is typically caused by simultaneously enabling free-run mode and a triggered acquisition. |
| -1074396838 | IMG_ERR_BAD_LIGHTING_RAMPUP | The lighting ramp-up delay is either less than the minimum value allowed or larger than the maximum time that the light is allowed to be on. |
| -1074396837 | IMG_ERR_AFE_CONFIG_TIMEOUT | Internal Error: A write to the AFEConfig register did not complete properly. |
| -1074396836 | IMG_ERR_LIGHTING_ARM_TIMEOUT | Internal Error: The arming of the lighting controller did not complete properly. |
| -1074396835 | IMG_ERR_LIGHTING_SHORT_CIRCUIT | The Direct Drive lighting controller has detected an abnormal load condition, such as a short circuit. Correct the abnormal load condition before restarting the acquisition. |
| -1074396834 | IMG_ERR_BAD_BOARD_HEALTH | The board health register has indicated an internal problem. |
| -1074396833 | IMG_ERR_LIGHTING_BAD_CONTINUOUS_CURRENT_LIMIT | The requested continuous current limit for the lighting controller is less than the minimum allowed current level. |
| -1074396832 | IMG_ERR_LIGHTING_BAD_STROBE_DUTY_CYCLE_LIMIT | The requested duty cycle limit for the lighting controller strobe mode is invalid. |
| -1074396831 | IMG_ERR_LIGHTING_BAD_STROBE_DURATION_LIMIT | The requested duration limit for the lighting controller strobe mode is invalid. |
| -1074396830 | IMG_ERR_BAD_LIGHTING_CURRENT_EXPOSURE_COMBINATION | The lighting current is invalid because the exposure time plus the lighting ramp-up time exceeds either the strobe duration limit or the strobe duty cycle limit. |
| -1074396829 | IMG_ERR_LIGHTING_HEAD_CONFIG_NOT_FOUND | The configuration for the desired light head was not found. |
| -1074396828 | IMG_ERR_LIGHTING_HEAD_DATA_CORRUPT | The data for the desired light head configuration is invalid or corrupt. |
| -1074396827 | IMG_ERR_LIGHTING_ABORT_TIMEOUT | Internal Error: The abort of the lighting controller did not complete properly. |
| -1074396826 | IMG_ERR_LIGHTING_BAD_STROBE_CURRENT_LIMIT | The requested strobe current limit for the lighting controller is less than the minimum allowed current. |
| -1074396825 | IMG_ERR_DMA_ENGINE_UNRESPONSIVE | Internal Error: The DMA engine is unresponsive. Reboot the target. If the problem persists contact National Instruments. |