Resource Usage (v1.02.8)
- Resource Usage for PIC18
- Resource Usage for PIC24F
- Resource Usage - PIC24H
- Resource Usage - dsPIC33F
- Resource Usage - PIC32
Peripherals
|
Type/Use |
Specific/Configurable |
Polled/Interrupt |
Limitations |
|
UART |
Select via Programming, Tx and Rx Signals |
Polled |
None |
|
Card Power Output |
Select via #define in SCpic18.h or SCpic24.h or SCpic32.h or SCdspic33f |
Polled |
Be able to source sufficient current to power the Smartcard |
|
Card Reset Output |
Select via #define in SCpic18.h or SCpic24.h or SCpic32.h or SCdspic33f |
Polled |
Totempole or Open Drain with pullup |
|
Card Present Input |
Select via #define in SCpic18.h or SCpic24.h or SCpic32.h or SCdspic33f |
Polled |
Input with Pullup |
|
Clock Output |
REFO Output |
n/a |
Clock Output to Card should be close to 4MHz (3.57MHz for exact Baud Rate, but not required) |
Topics
|
Name |
Description |
|
These tables specify the program memory, execution speed, RAM usage, and build requirements for PIC18 devices. | |
|
These tables specify the program memory, execution speed, RAM usage, and build requirements PIC24F devices. | |
|
These tables specify the program memory, execution speed, RAM usage, and build requirements PIC24H devices. | |
|
These tables specify the program memory, execution speed, RAM usage, and build requirements dsPIC33F devices. | |
|
These tables specify the program memory, execution speed, RAM usage, and build requirements PIC32 devices. |