STM8L15x Standard Peripherals Drivers
|
stm8l15x_tim5.c File Reference
This file provides firmware functions to manage the following functionalities of the TIM5 peripheral:
- TimeBase management
- Output Compare management
- Input Capture management
- Interrupts, DMA and flags management
- Clocks management
- Synchronization management
- Specific interface management.
#include "stm8l15x_TIM5.h"
Go to the source code of this file.
Functions | |
static void | TI1_Config (TIM5_ICPolarity_TypeDef TIM5_ICPolarity, TIM5_ICSelection_TypeDef TIM5_ICSelection, uint8_t TIM5_ICFilter) |
Configure the TI1 as Input. | |
static void | TI2_Config (TIM5_ICPolarity_TypeDef TIM5_ICPolarity, TIM5_ICSelection_TypeDef TIM5_ICSelection, uint8_t TIM5_ICFilter) |
Configure the TI2 as Input. | |
void | TIM5_ARRPreloadConfig (FunctionalState NewState) |
Enables or disables TIM5 peripheral Preload register on ARR. | |
void | TIM5_BKRConfig (TIM5_OSSIState_TypeDef TIM5_OSSIState, TIM5_LockLevel_TypeDef TIM5_LockLevel, TIM5_BreakState_TypeDef TIM5_BreakState, TIM5_BreakPolarity_TypeDef TIM5_BreakPolarity, TIM5_AutomaticOutput_TypeDef TIM5_AutomaticOutput) |
Configures the Break feature, dead time, Lock level, the OSSI, and the AOE(automatic output enable). | |
void | TIM5_CCxCmd (TIM5_Channel_TypeDef TIM5_Channel, FunctionalState NewState) |
Enables or disables the TIM5 Capture Compare Channel x. | |
void | TIM5_ClearFlag (TIM5_FLAG_TypeDef TIM5_FLAG) |
Clears the TIM�s pending flags. | |
void | TIM5_ClearITPendingBit (TIM5_IT_TypeDef TIM5_IT) |
Clears the TIM's interrupt pending bits. | |
void | TIM5_Cmd (FunctionalState NewState) |
Enables or disables the TIM5 peripheral. | |
void | TIM5_CounterModeConfig (TIM5_CounterMode_TypeDef TIM5_CounterMode) |
Specifies the TIM5 Counter Mode to be used. | |
void | TIM5_CtrlPWMOutputs (FunctionalState NewState) |
Enables or disables the TIM5 peripheral Main Outputs. | |
void | TIM5_DeInit (void) |
Deinitialize the TIM5 peripheral registers to their default reset values. | |
void | TIM5_DMACmd (TIM5_DMASource_TypeDef TIM5_DMASource, FunctionalState NewState) |
Enables or disables the TIM5 DMA Requests. | |
void | TIM5_EncoderInterfaceConfig (TIM5_EncoderMode_TypeDef TIM5_EncoderMode, TIM5_ICPolarity_TypeDef TIM5_IC1Polarity, TIM5_ICPolarity_TypeDef TIM5_IC2Polarity) |
Configures the TIM5 Encoder Interface. | |
void | TIM5_ETRClockMode1Config (TIM5_ExtTRGPSC_TypeDef TIM5_ExtTRGPrescaler, TIM5_ExtTRGPolarity_TypeDef TIM5_ExtTRGPolarity, uint8_t ExtTRGFilter) |
Configures the TIM5 External clock Mode1. | |
void | TIM5_ETRClockMode2Config (TIM5_ExtTRGPSC_TypeDef TIM5_ExtTRGPrescaler, TIM5_ExtTRGPolarity_TypeDef TIM5_ExtTRGPolarity, uint8_t ExtTRGFilter) |
Configures the TIM5 External clock Mode2. | |
void | TIM5_ETRConfig (TIM5_ExtTRGPSC_TypeDef TIM5_ExtTRGPrescaler, TIM5_ExtTRGPolarity_TypeDef TIM5_ExtTRGPolarity, uint8_t ExtTRGFilter) |
Configures the TIM5 External Trigger. | |
void | TIM5_ForcedOC1Config (TIM5_ForcedAction_TypeDef TIM5_ForcedAction) |
Forces the TIM5 Channel1 output waveform to active or inactive level. | |
void | TIM5_ForcedOC2Config (TIM5_ForcedAction_TypeDef TIM5_ForcedAction) |
Forces the TIM5 Channel2 output waveform to active or inactive level. | |
void | TIM5_GenerateEvent (TIM5_EventSource_TypeDef TIM5_EventSource) |
Configures the TIM5 event to be generated by software. | |
uint16_t | TIM5_GetCapture1 (void) |
Gets the TIM5 Input Capture 1 value. | |
uint16_t | TIM5_GetCapture2 (void) |
Gets the TIM5 Input Capture 2 value. | |
uint16_t | TIM5_GetCounter (void) |
Gets the TIM5 Counter value. | |
FlagStatus | TIM5_GetFlagStatus (TIM5_FLAG_TypeDef TIM5_FLAG) |
Checks whether the specified TIM5 flag is set or not. | |
ITStatus | TIM5_GetITStatus (TIM5_IT_TypeDef TIM5_IT) |
Checks whether the TIM5 interrupt has occurred or not. | |
TIM5_Prescaler_TypeDef | TIM5_GetPrescaler (void) |
Gets the TIM5 Prescaler value. | |
void | TIM5_ICInit (TIM5_Channel_TypeDef TIM5_Channel, TIM5_ICPolarity_TypeDef TIM5_ICPolarity, TIM5_ICSelection_TypeDef TIM5_ICSelection, TIM5_ICPSC_TypeDef TIM5_ICPrescaler, uint8_t TIM5_ICFilter) |
Initializes the TIM5 peripheral according to the specified parameters. | |
void | TIM5_InternalClockConfig (void) |
Enables the TIM5 internal Clock. | |
void | TIM5_ITConfig (TIM5_IT_TypeDef TIM5_IT, FunctionalState NewState) |
Enables or disables the specified TIM5 interrupts. | |
void | TIM5_OC1FastConfig (FunctionalState NewState) |
Configures the TIM5 Capture Compare 1 Fast feature. | |
void | TIM5_OC1Init (TIM5_OCMode_TypeDef TIM5_OCMode, TIM5_OutputState_TypeDef TIM5_OutputState, uint16_t TIM5_Pulse, TIM5_OCPolarity_TypeDef TIM5_OCPolarity, TIM5_OCIdleState_TypeDef TIM5_OCIdleState) |
Initializes the TIM5 Channel1 according to the specified parameters. | |
void | TIM5_OC1PolarityConfig (TIM5_OCPolarity_TypeDef TIM5_OCPolarity) |
Configures the TIM5 Channel 1 polarity. | |
void | TIM5_OC1PreloadConfig (FunctionalState NewState) |
Enables or disables the TIM5 peripheral Preload Register on CCR1. | |
void | TIM5_OC2FastConfig (FunctionalState NewState) |
Configures the TIM5 Capture Compare 2 Fast feature. | |
void | TIM5_OC2Init (TIM5_OCMode_TypeDef TIM5_OCMode, TIM5_OutputState_TypeDef TIM5_OutputState, uint16_t TIM5_Pulse, TIM5_OCPolarity_TypeDef TIM5_OCPolarity, TIM5_OCIdleState_TypeDef TIM5_OCIdleState) |
Initializes the TIM5 Channel2 according to the specified parameters. | |
void | TIM5_OC2PolarityConfig (TIM5_OCPolarity_TypeDef TIM5_OCPolarity) |
Configures the TIM5 Channel 2 polarity. | |
void | TIM5_OC2PreloadConfig (FunctionalState NewState) |
Enables or disables the TIM5 peripheral Preload Register on CCR2. | |
void | TIM5_PrescalerConfig (TIM5_Prescaler_TypeDef Prescaler, TIM5_PSCReloadMode_TypeDef TIM5_PSCReloadMode) |
Configures the TIM5 Prescaler. | |
void | TIM5_PWMIConfig (TIM5_Channel_TypeDef TIM5_Channel, TIM5_ICPolarity_TypeDef TIM5_ICPolarity, TIM5_ICSelection_TypeDef TIM5_ICSelection, TIM5_ICPSC_TypeDef TIM5_ICPrescaler, uint8_t TIM5_ICFilter) |
Configures the TIM5 peripheral in PWM Input Mode according to the specified parameters. | |
void | TIM5_SelectCCDMA (FunctionalState NewState) |
Selects the TIM5 peripheral Capture Compare DMA source. | |
void | TIM5_SelectHallSensor (FunctionalState NewState) |
Enables or Disables the TIM�s Hall sensor interface. | |
void | TIM5_SelectInputTrigger (TIM5_TRGSelection_TypeDef TIM5_InputTriggerSource) |
Selects the TIM5 Input Trigger source. | |
void | TIM5_SelectMasterSlaveMode (FunctionalState NewState) |
Sets or Resets the TIM5 Master/Slave Mode. | |
void | TIM5_SelectOCxM (TIM5_Channel_TypeDef TIM5_Channel, TIM5_OCMode_TypeDef TIM5_OCMode) |
Selects the TIM5 Output Compare Mode. | |
void | TIM5_SelectOnePulseMode (TIM5_OPMode_TypeDef TIM5_OPMode) |
Selects the TIM�s One Pulse Mode. | |
void | TIM5_SelectOutputTrigger (TIM5_TRGOSource_TypeDef TIM5_TRGOSource) |
Selects the TIM5 Trigger Output Mode. | |
void | TIM5_SelectSlaveMode (TIM5_SlaveMode_TypeDef TIM5_SlaveMode) |
Selects the TIM5 Slave Mode. | |
void | TIM5_SetAutoreload (uint16_t Autoreload) |
Sets the TIM5 Autoreload Register value. | |
void | TIM5_SetCompare1 (uint16_t Compare) |
Sets the TIM5 Capture Compare1 Register value. | |
void | TIM5_SetCompare2 (uint16_t Compare) |
Sets the TIM5 Capture Compare2 Register value. | |
void | TIM5_SetCounter (uint16_t Counter) |
Sets the TIM5 Counter Register value. | |
void | TIM5_SetIC1Prescaler (TIM5_ICPSC_TypeDef TIM5_IC1Prescaler) |
Sets the TIM5 Input Capture 1 prescaler. | |
void | TIM5_SetIC2Prescaler (TIM5_ICPSC_TypeDef TIM5_IC2Prescaler) |
Sets the TIM5 Input Capture 2 prescaler. | |
void | TIM5_TimeBaseInit (TIM5_Prescaler_TypeDef TIM5_Prescaler, TIM5_CounterMode_TypeDef TIM5_CounterMode, uint16_t TIM5_Period) |
Initializes the TIM5 Time Base Unit according to the specified parameters. | |
void | TIM5_TIxExternalClockConfig (TIM5_TIxExternalCLK1Source_TypeDef TIM5_TIxExternalCLKSource, TIM5_ICPolarity_TypeDef TIM5_ICPolarity, uint8_t ICFilter) |
Configures the TIM5 Trigger as External Clock. | |
void | TIM5_UpdateDisableConfig (FunctionalState NewState) |
Enables or Disables the TIM5 Update event. | |
void | TIM5_UpdateRequestConfig (TIM5_UpdateSource_TypeDef TIM5_UpdateSource) |
Selects the TIM5 Update Request Interrupt source. |
Detailed Description
This file provides firmware functions to manage the following functionalities of the TIM5 peripheral:
- TimeBase management
- Output Compare management
- Input Capture management
- Interrupts, DMA and flags management
- Clocks management
- Synchronization management
- Specific interface management.
- Attention:
THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
© COPYRIGHT 2011 STMicroelectronics
Definition in file stm8l15x_tim5.c.